Sun Joe 24V-DDK-LTX Handleiding

Sun Joe Boormachine 24V-DDK-LTX

Lees hieronder de 📖 handleiding in het Nederlandse voor Sun Joe 24V-DDK-LTX (56 pagina's) in de categorie Boormachine. Deze handleiding was nuttig voor 50 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/56

SAVE THESE INSTRUCTIONS

A Division of Snow Joe

®, LLC

OPERATOR’S MANUAL

Model 24V-DDK-LTX Form No. SJ-24V-DDK-LTX-880E-M

CORDLESS DRILL/DRIVER

24-VOLT MAX* | 1.5 Ah | 40-PC DRIVER BIT SET

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Always follow these safety guidelines. Failure to do so may

result in serious bodily injury or death.

General Safety

mWARNING! When using the drill/driver basic safety

precautions should always be followed to reduce the risk of

re, electric shock, and personal injury. These include:

Work Area Safety

1. Keep work area clean and well-lit – Cluttered,

dark areas invite accidents.

2. Keep children, bystanders, and pets away –

All spectators, including pets, should be kept a safe

distance away from the work area.

3. Do not operate power tools in explosive atmospheres

– Such as in the presence of ammable liquids, gases,

or dust. Power tools create sparks which may ignite the

dust or fumes.

Personal Safety

1. Stay alert – Watch what you are doing. Use common

sense. Do not operate the drill/driver when you are tired,

or under the inuence of alcohol or drugs.

2. Dress properly – Do not wear loose clothing or jewelry.

They can get caught in moving parts. Loose clothes,

jewelry, or long hair can be caught in moving parts.

3. Avoid unintentional starting – Do not carry the drill/driver

with your nger on the trigger. Make sure the switch is o

before connecting the drill/driver to power source.

4. Do not overreach – Keep proper footing and balance at

all times. Proper footing and balance enable better control

of the cordless drill/driver in unexpected situations.

5. Use personal protective equipment – Always wear eye

protection. Protective equipment such as dust mask,

non-skid safety shoes, hard hat, or hearing protection

used for appropriate conditions will reduce personal

injuries.

6. If devices are provided for the connection of dust

extraction and collection facilities, ensure these are

connected and properly used. – Use of dust collection

can reduce dust-related hazards.

7. Do not use on a ladder or unstable support –

Stable footing on a solid surface enables better control of

the power tool in unexpected situations.

Tool Use and Care

1. Do not force the tool – It will perform better with less

likelihood of personal or mechanical injury if it is used at

the rate for which it was designed.

2. Donotusedrill/driverifswitchdoesnotturnonoro

– The drill/driver that cannot be controlled with the switch

is dangerous and must be repaired.

3. Disconnect the plug from the power source and/or

battery pack from the drill/driver before making any

adjustments, changing accessories, or storing the

drill/driver – Such preventive safety measures reduce risk

of starting the power tool accidentally.

4. Store idle drill/driver out of reach of children or other

untrained persons – Drill/driver is dangerous in the hands

of untrained users.

5. Maintain cordless drill/driver – Check for misalignment

or binding of moving parts, breakage of parts, and any

other condition that may aect the drill/driver's operation.

If damaged, have the drill/driver serviced before using.

Many accidents are caused by poorly maintained tools.

6. Use the power tool, accessories and tool bits etc.

in accordance with these instructions, taking into

account the working conditions and the work to be

performed – Use of the power tool for operations dierent

from those intended could result in a hazardous situation.

Battery Tool Use and Care

1. Rechargeonlywiththechargerspeciedbythe

manufacturer – A charger that is suitable for one type

of battery pack may create a risk of re when used with

another battery pack.

2. Charge internal battery at ambient temperatures

between 50ºF – 104ºF (10ºC – 40ºC).

3. Under abusive conditions, liquid may be ejected from

the battery; avoid contact. If contact accidentally

occurs,ushwithwater.Ifliquidcontactseyes,

seek medical help – Liquid ejected from the battery may

cause irritation or burns.

4. Usepowertoolsonlywithspecicallydesignated

battery packs – Use of any other battery packs may

create a risk of injury and re.

5. When battery pack is not in use, keep it away from

other metal objects, like paper clips, coins, keys, nails,

screws or other small metal objects, that can make a

connection from one terminal to another – Shorting the

battery terminals together may cause burns or a re.

Service

1. If your power tool requires service, contact an

authorized Snow Joe® + Sun Joe® dealer or call the

Snow Joe® + Sun Joe® customer service center at

1-866-SNOWJOE (1-866-766-9563) – Only identical

replacement parts should be utilized for repairs. This will

ensure that the safety of the power tool is maintained.

2. If the battery charger cable is damaged, it must be

immediately replaced to avoid a hazard – Contact

the Snow Joe® + Sun Joe® customer service center at

1-866-SNOWJOE (1-866-766-9563) for assistance.

Safety Rules for Cordless

Drill/Driver

1. Hold power tool by insulated gripping surfaces,

when performing an operation where the cutting

accessory may contact hidden wiring –

Cutting accessory contacting a “live” wire may make

exposed metal parts of the power tool “live” and could

give the operator an electric shock.

2. Know your power tool. Read operator’s manual

carefully. Learn its applications and limitations, as well

asthespecicpotentialhazardsrelatedtothispower

tool – Following this rule will reduce the risk of electric

shock, re, or serious injury.

3. Make sure approved eye protection is being worn

and properly adjusted and secured at all times the

drill/driver is being used – There is a possibility that

small pieces of metal could shear o from over-tightened

screws while using the tool.

4. Protect your lungs. Wear a face or dust mask if the

operation is dusty – Following this rule will reduce the

risk of serious personal injury.

5. Protect your hearing. Wear hearing protection during

extended periods of operation – Following this rule will

reduce the risk of serious personal injury.

6. Battery tools do not have to be plugged into an

electrical outlet; therefore, they are always in

operating condition. Be aware of possible hazards

when not using your battery tool or when changing

accessories – Following this rule will reduce the risk of

electric shock, re, or serious personal injury.

7. Donotplacebatterytoolsortheirbatteriesnearreor

heat – This will reduce the risk of explosion and possibly

injury.

8. Do not crush, drop or damage battery pack. Do not

use a battery pack or charger that has been dropped

or received a sharp blow – A damaged battery is subject

to explosion. Properly dispose of a dropped or damaged

battery immediately.

9. Batteries can explode in the presence of a source

of ignition, such as a pilot light – To reduce the risk of

serious personal injury, never use any cordless product

in the presence of open ame. An exploded battery can

propel debris and chemicals. If exposed, ush with water

immediately.

10. Do not charge battery tool in a damp or wet location –

Following this rule will reduce the risk of electric shock.

Battery + Charger

Safety Instructions

We pay a great deal of attention to the design of every battery

pack to ensure that we supply you with batteries that are safe,

durable and have a high energy density. The battery cells have

a wide range of safety devices. Each individual cell is initially

formatted and its electrical characteristic curves are recorded.

This data is then used exclusively to be able to assemble the

best possible battery packs.

Despite all the safety precautions, caution must always be

exercised when handling batteries. The following points must

be obeyed at all times to ensure safe use. Safe use can only

be guaranteed if undamaged cells are used. Incorrect handling

of the battery pack can cause cell damage.

IMPORTANT! Analyses conrm that incorrect use and poor

care of high-performance batteries are the main factors

responsible for personal and/or product damage.

mWARNING! Use only approved replacement batteries;

other batteries may damage the cordless drill/driver and cause

it to malfunction, which can lead to serious personal injury.

mCAUTION! To reduce the risk of injury, charge the

iON+ 24V lithium-ion battery pack only in its designated

iON+ 24V lithium-ion charger. Other types of chargers present

risk of re, personal injury and damage. Do not wire a battery

pack to a power supply plug or car cigarette lighter. Such

misuse will permanently disable or damage the battery pack.

• Avoid dangerous environments – Do not charge the

battery pack in rain, snow or in damp or wet locations.

Do not use the battery pack or charger in the presence of

explosive atmospheres (gaseous fumes, dust or ammable

materials) because sparks may be generated when inserting

or removing the battery pack, which could lead to a re.

• Charge in a well-ventilated area – Do not block the

charger vents. Keep them clear to allow for proper

ventilation. Do not allow smoking or open ames near a

charging battery pack. Vented gases may explode.

NOTE: The safe temperature range for the battery is

41°F – 105ºF (5°C – 40.5°C). Do not charge the battery

outside in freezing weather; charge it at room temperature.

• Maintain charger cord – When unplugging the charger,

pull the plug, not the cord, from the receptacle to reduce

the risk of damage to the electrical plug and cord.

Never carry the charger by its cord or yank it by the cord

to disconnect it from the receptacle. Keep the cord away

from heat, oil and sharp edges. Make sure the cord will not

be stepped on, tripped over or subjected to damage or

stress when the charger is in use. Do not use the charger

with a damaged cord or plug. Replace a damaged charger

immediately.

• Do not use an extension cord unless it is absolutely

necessary – Using the wrong, damaged or improperly

wired extension cord poses a risk of re and electric shock.

If an extension cord must be used, plug the charger into a

properly wired 16 gauge or larger extension cord with the

female plug matching the male plug on the charger.

Make sure that the extension cord is in good electrical

condition.

• Use only recommended attachments – Use of an

attachment not recommended or sold by the battery

charger or battery pack manufacturer may result in risk of

re, electric shock or personal injury.

• Unplug charger when not in use – Make sure to remove

battery packs from unplugged chargers.

mWARNING! To reduce the risk of electric shock,

always unplug the charger before performing any cleaning

or maintenance. Do not allow water to ow into the charger.

Use a Ground Fault Circuit Interrupter (GFCI) to reduce shock

hazards.

• Do not burn or incinerate battery packs – Battery packs

may explode, causing personal injury or damage.

Toxic fumes and materials are created when battery packs

are burned.

• Do not crush, drop or damage battery packs – Do not

use the battery pack or charger if they have sustained a

sharp blow, been dropped, run over or have been damaged

in any way (i.e. pierced with a nail, hit with a hammer,

stepped on, etc.).

• Do not disassemble – Incorrect reassembly may pose

a serious risk of electric shock, re or exposure to toxic

battery chemicals. If the battery or charger are damaged,

contact an authorized Snow Joe® + Sun Joe® dealer or

call the Snow Joe® + Sun Joe® customer service center at

1-866-SNOWJOE (1-866-766-9563) for assistance.

• Battery chemicals cause serious burns – Never let a

damaged battery pack contact the skin, eyes or mouth. If a

damaged battery pack leaks battery chemicals,

use rubber or neoprene gloves to safely dispose of it. If skin

is exposed to battery uids, wash the aected area with

soap and water and rinse with vinegar. If eyes are exposed

to battery chemicals, immediately ush with water for

20 minutes and seek medical attention. Remove and

dispose of contaminated clothing.

• Do not short circuit – When battery pack is not in use,

keep it away from other metal objects, like paper clips,

coins, keys, nails, screws or other small metal objects,

that can make a connection from one terminal to another.

Shorting the battery terminals together may cause burns or

a re.

• Store your battery pack and charger in a cool,

dry place – Do not store the battery pack or charger where

temperatures may exceed 105ºF (40.5ºC), such as in direct

sunlight or inside a vehicle or metal building during the

summer.

Information about the battery

1. The battery pack supplied with your cordless power tool is

only partially charged. The battery pack has to be charged

completely before you use the tool for the rst time.

2. For optimum battery performance, avoid low discharge

cycles by charging the battery pack frequently.

3. Store the battery pack in a cool place, ideally at 77°F

(25°C) and charged to at least 40%.

4. Lithium-ion batteries are subject to a natural aging

process. The battery pack must be replaced at the latest

when its capacity falls to just 80% of its capacity when

new. Weakened cells in an aged battery pack are no

longer capable of meeting the high power requirements

needed for the proper operation of your cordless drill/

driver, and therefore pose a safety risk.

5. Do not throw battery packs into an open re as this poses

a risk of explosion.

6. Do not ignite the battery pack or expose it to re.

7. Do not exhaustively discharge batteries. Exhaustive

discharge will damage the battery cells. The most

common cause of exhaustive discharge is lengthy storage

or non-use of partially discharged batteries. Stop working

as soon as the performance of the battery falls noticeably

or the electronic protection system triggers.

Place the battery pack in storage only after it has been

fully charged.

8. Protect batteries and the tool from overloads.

Overloads will quickly result in overheating and cell

damage inside the battery housing even if this overheating

is not apparent externally.

9. Avoid damage and shocks. Immediately replace batteries

that have been dropped from a height of more than

3 feet (1 meter) or those that have been exposed to violent

shocks, even if the housing of the battery pack appears to

be undamaged. The battery cells inside the battery may

have suered serious damage. In such instances, please

read the waste disposal information for proper battery

disposal.

10. If the battery pack suers overloading and overheating,

the integrated protective cuto will switch o the

equipment for safety reasons.

IMPORTANT! Do not press the ON/OFF switch any more

if the protective cut-o has been activated. This may

damage the battery pack.

11. Recharge only with the charger specied by the

manufacturer. A charger that is suitable for one type of

battery pack may create a risk of re when used with

another battery pack.

12. Use appliances only with specically designated battery

packs. Use of any other battery packs may create a risk of

injury and re.

Product specificaties

Merk:	Sun Joe
Categorie:	Boormachine
Model:	24V-DDK-LTX

Heb je hulp nodig?

Als je hulp nodig hebt met Sun Joe 24V-DDK-LTX stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Boormachine Sun Joe

Sun Joe 24V-DD-LTE-BLK-RM Handleiding

23 Mei 2023

Sun Joe BDL-A0050 Handleiding

10 Maart 2023

Sun Joe 24V-DD-LTE-RED-RM Handleiding

1 Februari 2023

Sun Joe 24V-DDK-LTX Handleiding

21 Januari 2023

Sun Joe 24V-DD-CT Handleiding

7 Januari 2023

Sun Joe 24V-DD-LTE Handleiding

6 December 2022

Sun Joe 24V-DDK-LTX-PNK Handleiding

28 Oktober 2022

Sun Joe 24V-DD-LTE-RM Handleiding

5 Oktober 2022

Handleiding Boormachine

Nieuwste handleidingen voor Boormachine

Einhell YPL 652 Handleiding

4 December 2024

Einhell TH-ID 720 E Handleiding

4 December 2024

Einhell YPL 800 Handleiding

4 December 2024

Einhell RT-ID 75/1 Handleiding

4 December 2024

Einhell 4132720 Handleiding

4 December 2024

Einhell BT-RH 920 Handleiding

4 December 2024

Einhell RT-RH 24 Handleiding

4 December 2024

Einhell BT-RH 850 Handleiding

4 December 2024

Einhell BT-RH 900 Handleiding

4 December 2024

Worx WX956L Handleiding

3 December 2024