Star Micronics TUP542-24 Handleiding

Star Micronics Labelprinter TUP542-24

Lees hieronder de 📖 handleiding in het Nederlandse voor Star Micronics TUP542-24 (16 pagina's) in de categorie Labelprinter. Deze handleiding was nuttig voor 45 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/16

TUP500

Quick Setup Guide

Thank you for choosing Star Micronics as your provider for prinng soluons.

Unpacking the Unit

Contents

a. Printer

b. Paper Sha

c. 1” Paper Core Adapter

d. 2” Paper Core Adapter

e. Shaft Weight*

f. Interface Mounng Screws(2)*

g. Paper Core Adapter Screws(4)

*Not Pictured

Assembly Installing the Interface –

Place the interface sub-assembly into the interface

slot as shown. Take care to be sure the interface

cartridge is seated properly into its connector.

Using a #2 Phillips screwdriver, install the mounng

screws located in back of the printer.

Interface Type…

Parallel

USB

Ethernet

Serial

Assembly Paper Roll Setup –

It is necessary to adjust the paper roll holder for the width of the paper you use. If the seng position is incorrect, the paper roll will

be supplied improperly to the mechanism which in turn causes paper transport problems. Thus, it is should be properly adjuste d.

The following table shows the paper roll holder

and paper core inner diameter range.

Paper roll Holder

Types

Paper Core

Diameter Ranges

Paper roll Holder (1)

25.4 mm ± 1

Paper roll Holder (2)

50.8 mm ± 1

Paper roll Holder (3)

Oponal

76.2 mm ± 1

Note 1) The unit is assembled for 1 inch paper cores

when shipped from the factory. Also, it is set for a

paper width of 82.5 ±0.5 (take-up width of 83 +0.5/-1)

when the printer is shipped from the factory.

Note

Roll Holder Size

Paper Thickness

1” or 25.4 mm

65 to 100 µm

2” or 50.8 mm

100 to 150 µm

3” or 76.2 mm

100 to 150 µm

The size of the core “

used is related to the

thickness of the paper

used.”

Product specificaties

Merk:	Star Micronics
Categorie:	Labelprinter
Model:	TUP542-24
Breedte:	160 mm
Diepte:	234 mm
Hoogte:	179 mm
USB-poort:	Ja
Aantal USB 2.0-poorten:	1
Certificering:	CE, FCC, VCCI, EN55022
RS-232 port:	1
Temperatuur bij opslag:	-20 - 60 °C
Compatibele besturingssystemen:	Windows XP 32 Bit, Vista 32/64 Bit, Windows 7 32/64 Bit, Server 2008 32/64 Bit, XP Embedded, CE, POSReady 2009, OPOS, JavaPOS, USB Vendor Class, Linux, Mac OS X, StarIO SDK
Luchtvochtigheid bij opslag:	10 - 90 procent
Mediadikte:	0.065 - 0.15 mm
Maximum roll diameter:	150 mm
Printtechnologie:	Direct thermisch
Optionele connectiviteit:	Ethernet
Printsnelheid (metrisch):	220 mm/sec
Parallelle poort(en):	1
Bedrijfstemperatuur (T-T):	0 - 50 °C
Relatieve vochtigheid in bedrijf (V-V):	10 - 80 procent
Code geharmoniseerd systeem (HS):	84433210
Ondersteunde papierwijdte:	45, 82.5 mm
Emulatie:	Star Mode, ESC/POS
Autocutter duurzaamheid:	1 miljoen delen