SoundTube SB335 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor SoundTube SB335 (8 pagina's) in de categorie Receiver. Deze handleiding was nuttig voor 7 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
© 2015 SoundTube Ente tainment,r Inc. All rights rese ved.r PN INS-SB335 Rev03.17.2015
1.435.647.9555
|
800.647.TUBE
|
www.soundtube.com
Warning
SoundTube products must be installed by ofessional audio installer/contracto a pr r. For safety and for
optimum audio performance, installer must follow all di ections issued by Sound r Tube Entertainment .
Front Rear
Box Contents
1- Amplier
1- Bluetooth® antenna
1- IR receiver with 1m cord
1- 32 V, 3.75 A power supply
1- Six-pin Euroblock connectors
1- Three-pin Euroblock connectors
1- Mounting bracket
2- 2" Velcro strips
1- Double sided tape disk for IR receiver
The SB335 is a 2 or 3 channel amplier with Dolby Digital decoding. It is designed to be used with either an analog or digital input from a TV or other audio
source. With a digital input it automatically senses Dolby Digital and PCM and switches modes. The SB335 takes the input signal from an audio source, decodes
it and outputs either a 2 or 3 channel amplied signal to a sound bar or set of speakers. When set in the 2 channel mode it will take a stereo or multi-channel
signal and mix it down to 2 output channels (left and right). When set in the 3 channel mode it will take a stereo or multi-channel signal and mix it into 3 output
channels (left, right and center). In either mode there is a sub out option.
When used in place of internal TV speakers, change the TV’s audio setting to external speakers. Teach the SB335 the TV’s volume codes and it seamlessly
operates with no additional remotes.
Install Instructions For:
SB335
SB335
IMPORTANT SAFETY INFORMATION
1. Read these instructions.
2. Keep these instructions.
3. Heed all warning.
4. Follow all instructions
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that
produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for
your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
11. Only use attachments/accessories specied by the manufacturer.
12. Use only with the cart, stand, tripod, bracked, or table specied by the manufacturer, or sold with the apparatus. When a cart
is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lighting storms or when unused for long periods of time.
14. Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way,
such as power-supply cold or plug is damaged, liquid has been spilled or object have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate normally, or has been dropped.
WARNING:
To reduced the risk of re or electric shock, do not expose this apparatus to rain or moisture
The apparatus shall not be exposed to dripping or splashing and that no objects lled with liquids, such as vases, shall be placed
on the apparatus.
Manufactured under license from Dolby Labroatories. Dolby and the double-D symbol are
registeres trademarks of Dolby Laboratories.
Install Instructions For:
SB335
SB335
1. Unpack amplier.
Note: Follow steps 2-5 if
using the mounting adapter.
If not skip to step 6.
2. Attach mounting bracket
to a secure pole or surface
using screws or metal
strapping.
1. to connect wires to the
Euro-Block connector
loosen the screws, insert a
1/4" in of stripped wire and
tighten the screws.
Note: make sure there are
no loose strands of wire.
7. The power supply can
be attached to a mounting
surface using the Velcro
strips. Make sure the velcro
is placed on outer most
plastic portion of the power
supply (do not stick it to the
label).
6. If mounting to a at
surface use 2 screws
through the mounting
bracket on each end of the
amp.
4. Slide mounting bracket
into groove on bottom of
amplifer enclosure.
3. For 3 channels connect
the speakers to the two
outer sets of terminal for
your left and right channels
and the center set for the
center channel. Set dip
switch 5 in the down
position.
2. For 2 channels (Stereo)
connect your speakers to the
2 outer sets L and R
terminals. Set dip switch 5 in
the up position.
1a. Make sure the + wire is
connected to the plus or
red terminal on your
speaker and the – to the
negative or black terminal
on the speaker.
1. Connect a Subwoofer to
the SB335 with an Audio
RCA cable.
5. Replace faceplate screws
Mounting the SB335
Speaker Connections
Connecting a Subwoofer
3. To attach mounting
bracket, remove all faceplate
screws from one side. Lift
faceplate and set aside.
Installed
Install Instructions For:
SB335
SB335
STEREO 3 CHANNEL
1 2 3 4 5 6 1 2 3 4 5 6


Product specificaties

Merk: SoundTube
Categorie: Receiver
Model: SB335

Heb je hulp nodig?

Als je hulp nodig hebt met SoundTube SB335 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Receiver SoundTube

Handleiding Receiver

Nieuwste handleidingen voor Receiver