Soundskins SSK-STRIP Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Soundskins SSK-STRIP (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 4 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
Foam Tape
installation
instructions
Alcohol based cleaner
& microfiber towel
Sharp blade or
scissors Roller
R
Prepping the Surface
Start by getting all metal surfaces clean from dust, oil, wax and moisture.
We recommend using a microfiber cloth and an alcohol based cleaning
solution such as denatured alcohol or Invisible Glass. If you have rust, it may
require a bit more attention to ensure the material will stick well. Once all the
surfaces have been prepped and air dried, you can start applying the
material.
Installation
Remove a small section of the backing paper from the foam tape and tack
it into place of the area you would like to cover.
Then, cut the strip to your required size and remove the remainder of the
backing paper.
Last, press or wrap the adhesive side of the foam tape firmly into place, and
repeat this process as needed.
If you have any questions, don’t hesitate to contact us using the information
provided below.
SoundSkins Global USA
(877)211-5597
usa@SoundSkinsGlobal.com
www.SoundSkinsGlobal.com ®2024 SoundSkins Global, All Rights Reserved
@soundskinsglobal
All required tools


Product specificaties

Merk: Soundskins
Categorie: Niet gecategoriseerd
Model: SSK-STRIP

Heb je hulp nodig?

Als je hulp nodig hebt met Soundskins SSK-STRIP stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Soundskins

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd