Sony MRW68E-D1 Handleiding

Sony Niet gecategoriseerd MRW68E-D1

Lees hieronder de 📖 handleiding in het Nederlandse voor Sony MRW68E-D1 (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Overview

The MRW68E-D1 (hereafter referred to as the “reader/writer”)

has the following features:

sQuick and simple data transfer - easily transfer images from

camera to PC

sQuick to Connect - Hot-pluggable USB-powered design

sCompatible with “Memory Stick Duo”, SD Memory Card,

MultiMediaCard.

System Requirements

The reader/writer requires the following minimum system

configuration:

• OS

– Windows Vista®

– Windows® XP (Service Pack 2 or later)

– Windows® 2000 Professional (Service Pack 4 or later)

– Mac OS® X 10.2 or later

This product works with the standard Windows drivers.

Supported Media

The reader/writer supports the following media:

“Memory Stick” media

• “Memory Stick Duo” (without MagicGate)

• “MagicGate Memory Stick Duo”

• “Memory Stick Duo” (with MagicGate) *1

• “Memory Stick PRO Duo” *1

• “Memory Stick PRO-HG Duo” *1

• “Memory Stick Micro” (“M2”) *1*2*4

SD Memory cards

• SD Memory Card

• SDHC™ Memory Card

• miniSD™ Card*4

• miniSDHC™ Card*4

• microSD™ Card*4

• microSDHC™ Card*4

MultiMediaCards

• MultiMediaCard

• RS-MMC*4

• MMCplus*3

• MMCmobile*3*4

• MMCmicro*4

*1 4-bit parallel data transfer is supported. It, however, varies depending

on each medium and how long it takes to read/write data.

*2 “M2” is an abbreviation of “Memory Stick Micro”. In this document,

hereinafter, the abbreviation “M2” is used.

*3 8-bit parallel data transfer is not supported.

*4 With adaptor only (not supplied).

Notes

• In this manual, all types of media listed in “Supported Media”

are generically called memory cards.

• Not all memory cards are guaranteed to work. Operation is

not assured if non-supported memory cards are used.

• “MagicGate®

” is the general name of a copyright protection

technology developed by Sony.

• Recording or playback of the data that uses "MagicGate"

technology is not supported. MagicGate is copyright

protection that uses encryption technology. Data recording/

playback by using MagicGate technology such as music that

requires copyright protection is only compatible with

MagicGate supported equipment.

• The capacity of a file to be recorded/played back is smaller

than 4GB per file according to the specifications of the system

incorporated in “Memory Stick”.

• Although operation check of this product has been performed

with up to 8 GB “Memory Stick,” please note that the

operation is not guaranteed for every type of “Memory Stick.”

• The “Memory Stick” media, SD memory cards and

MultiMediaCards all use the same slot, so you cannot use

them at the same time.

• Only DOS format is supported. Memory cards in other

formats are not supported.

About Memory Stick

What is “Memory Stick”?

“Memory Stick” is a compact-size IC recording medium with a

large storage capacity. It has been designed not only for

exchanging/sharing digital data among “Memory Stick”

compliant products, but also for serving as an insertable/

removable external storage medium that can save data.

Notes on “Memory Stick”

On formatting (initialization)

• If you format a medium in which data has been already

written, all the data and software will be erased. Please be

cautious not to mistakenly erase any important data.

• Please make sure to format (initialize) a medium with the

formatter of a “Memory Stick” compliant product. If it is

initialized with Windows Explorer, a FORMAT ERROR

occurs, and data on the medium can no longer be used by this

product.

About the size of “Memory Stick”

• Standard-size “Memory Stick” media cannot be used on this

product.

• Do not insert multiple “Memory Stick” media at the same

time. It might cause damage to the product.

• When you use “Memory Stick Duo” on this product, please

make sure to insert it in the right direction.

• “Memory Stick Duo,” “Memory Stick Micro,” and M2 Duo

size Adaptor should be kept away from small children to

prevent them from accidentally swallowing it.

• When you use “Memory Stick Micro” on this product, please

make sure to attach the medium into M2 Duo size adapter.

If you attempt to insert “Memory Stick Micro” without

attaching to M2 Duo size adapter, there is a possibility that it

cannot be pulled out.

Usage Notes

Notes on using “Memory Stick Duo/Memory

Stick PRO Duo”

• When you use “Memory Stick Duo/Memory Stick PRO Duo”

without Write-Protected switch, be careful not to edit or erase

important data by mistake.

• When you use “Memory Stick Duo/Memory Stick PRO Duo”

with Write-Protected switch, data cannot be recorded, edited,

or erased by enabling “LOCK” on the switch.

• Use an object with a sharp tip to move the Write-Protected

switch.

• Do not press on the memo area strongly when writing.

• Carry and keep “Memory Stick” in the supplied case.

Other Points to Note

Media formatting

Do not format (initialize) memory cards with a computer. If you

format a memory card with a computer, devices such as digital

cameras may not be able to use it due to differences in format

type (FAT size, cluster size, hard disk type, or super floppy disk

type). If you use a digital camera, format memory cards with

your camera, instead.

Restrictions on DOS mode

In Windows, the reader/writer does not operate in DOS mode.

To use the reader/writer, start up Windows.

Standby

The reader/writer supports standby functions based on the

PC2000 standard, which may not cover the standby function of

all computers. Disable the standby function of your computer if

it causes any problems. While the computer is in standby, do not

insert or remove any media.

Do not attempt to dismantle, repair, or alter the

reader/writer yourself

Do not, under any circumstances, attempt to dismantle, repair,

or alter the reader/writer yourself. You may not only

permanently damage the reader/writer and/or your computer,

but may also cause fire or personal injury through electrical

shock.

Operating and storage environments

• Do not place the reader/writer close to heat sources or in

direct sunlight; in dusty, dirty, or humid locations; under

precipitation such as rain; or leave it in a vehicle with the

windows closed.

• If the reader/writer interferes with the reception of radio or

television signals, move the reader/writer away from the

radio or television.

• When using the reader/writer, do not wrap it in cloth, sheets,

or covers as this may cause a malfunction or fire.

Specifications

USB transfer rate

Full-speed (12 Mbps)

High-speed (480 Mbps)

This high-speed transfer rate is a theoretical value for the USB

standard.

Actual performance is dependent on the device.

Power requirements

4.75 to 5.25 V DC

Current consumption

Max. 500 mA

Access indicator

Lit during the memory card insertion.

Blinks on access.

Operating environment

Temperature: 5 °C to 40 °C (41 °F to 104 °F)

Humidity: 30% to 80% RH

Storage environment

Temperature: –30 °C to + 60 °C (–22 °F to +140 °F)

Humidity: No condensation

Dimensions (W x H x D)

Approx. 31.7 × 11.2 × 57 mm

(1 1/4 ×15/32 × 2 1/4 inches) (excluding protrusions)

Mass

Approx. 17 g (0.60 oz.) (TYP)

Package Contents

When you unpack the box, make sure that it contains all the

accessories listed below.

If anything is missing or damaged, contact your retailer.

• MRW68E-D1 Multi-Card Reader/Writer

• Operating Instructions

• Warranty Card

Parts and Functions

1Cap

2USB connector

Connect to a computer

3Memory Card slot

Insert memory cards here. This slot is compatible with

“Memory Stick Duo” size media, SD memory cards and

MultiMediaCards.

Using the Reader/Writer

Inserting a Memory Card

Insert a memory card into the slot on the reader/writer.

When inserting a card, push it in as far as it can go.

Notes

• Insert only one memory card into the slot. Do not insert

multiple cards at the same time.

• When inserting a “Memory Stick Micro” (“M2”), miniSD

Card, miniSDHC Card, microSD Card, microSDHC Card,

RS-MMC, MMCmobile or MMCmicro, use an appropriate

adaptor (not supplied).

• Do not insert a card upside down.

• Forcibly inserting the card may damage the card or the slot.

• If a memory card is inserted incorrectly, you may not be able

to remove it. In the unlikely event that a memory card

becomes stuck in the reader/writer, consult your local Sony

dealer.

Connecting the Reader/Writer to a

Computer

Simply connect the reader/writer to a computer directly.

1 Start the computer.

2 Pull off the cap of the reader/writer.

3 Insert a memory card.

4 Connect the USB header of the reader/writer to

the USB port on the computer.

The computer recognizes the reader/writer as a removable

disk, and the reader/writer is ready for use.

Notes

• Do not connect to a computer via a USB hub.

• Depending on the computer and the status of its operating

system, the reader/writer may not operate or may become

unstable. If this occurs, refer to the “Troubleshooting” section.

• After disconnecting from the USB port, wait at least 5 seconds

before reconnecting it. (Otherwise, the reader/writer may not

be recognized.)

• When two or more USB devices are connected to one

computer, the reader/writer is not guaranteed to operate

simultaneously with some types of USB devices.

• You may not access two or more memory cards

simultaneously on a single computer by connecting additional

memory card devices. Remove any memory cards from the

reader/writer or turn off the other devices.

• Do not remove a memory card from the reader/writer while

the access indicator is blinking. The data stored on the

memory card may be damaged.

WARNING

Keep the unit away from children. If any part of the

unit is swallowed, promptly see a doctor.

To reduce the risk of fire or electric shock, do not

expose this apparatus to rain or moisture.

To avoid electrical shock, do not open the cabinet.

Refer servicing to qualified personnel only.

Caution

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for

help.

You are cautioned that any changes or modifications not

expressly approved in this manual could void your authority to

operate this equipment.

Note

If you have any questions about this product, you may call the

telephone number listed in “Technical Support.” The telephone

number below is not for customer service but only for official

purposes.

Declaration of Conformity

Trade Name: SONY

Model No.: MRW68E

Responsible Party: Sony Electronics Inc.

Address: 16530 Via Esprillo, San Diego, CA 92127

U.S.A.

Telephone No.: 858-942-2230

This device complies with Part 15 of the FCC Rules. Operation

is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including

interference that may cause undesired operation.

NOTICE TO USERS

part, may not be reproduced or translated to any machine-

readable form without prior written approval from Sony

Corporation.

IN NO EVENT SHALL SONY CORPORATION BE LIABLE

FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL

DAMAGES, WHETHER BASED ON TORT, CONTRACT, OR

OTHERWISE, ARISING OUT OF OR IN CONNECTION WITH

THIS MANUAL, THE DEVICE DRIVERS OR OTHER

INFORMATION CONTAINED HEREIN OR THE USE

THEREOF.

Sony Corporation reserves the right to make any modification to

this manual or the information contained herein at any time

without notice.

SONY CORPORATION IS NOT RESPONSIBLE FOR ANY

DAMAGE TO OR LOSS OF ANY PROGRAMS, DATA, OR

OTHER INFORMATION STORED ON ANY MEDIA.

audio/video for any other purpose than personal enjoyment.

Please be warned that the “Memory Stick” containing images

and data protected by copyright shall be strictly used within

Trademarks

• , “Memory Stick,” “Memory Stick Duo,” “Memory

Stick PRO Duo,” “Memory Stick PRO-HG Duo,” “Memory

Stick Micro,” “M2,” and “MagicGate” are registered

trademarks or trademarks of Sony.

• Microsoft®, Windows®, and the Windows logo are trademarks

or registered trademarks of Microsoft Corporation in the

United States of America and/or other countries.

• Macintosh® and Mac OS® are registered trademarks of Apple,

Inc. in the United States of America and/or other countries.

• Other system names, product names, and company names

appearing in this manual are trademarks or registered

trademarks of their respective holders, even though not

indicated by the ® or ™ marks.

4-140-749-11 (1)

Multi-Card

Reader/Writer

http://www.sony.net/

MRW68E-D1

Terminal

Memo area

Write-Protected

switch

To insert a “Memory Stick”

* Push at the left side.

To insert a SD Memory Card/

MultiMediaCard.

Operating Instructions

Before operating the unit, please read this document

thoroughly, and retain it for future reference.

Solution

,Your computer and the reader/

writer may not be properly

connected. Disconnect the reader/

writer from the computer and

reconnect it.

,Your computer and the reader/

writer may not be properly

connected. See “Connecting the

Reader/Writer to a Computer” and

make sure the connection is correct.

,A USB device other than the reader/

writer is connected to the USB port

on the computer.

,No memory card is inserted. Insert a

memory card properly.

,The memory card is not fully

inserted. Insert the card completely.

,The memory card is not inserted

straight. Remove the card and insert

it again.

,The speed may vary depending on

the environment or the memory

card being used. This is not a

malfunction.

Notes

• It may take a while for the removable disk icon to appear.

• If the removable disk icon does not appear, follow the steps

under “Disconnecting the Reader/Writer From the

Computer” in the Operating Instructions (this manual) to

disconnect the reader/writer, and then wait at least 5 seconds

before reconnecting it.

If the [Safely Remove Hardware] icon mentioned in step 1 of

“Disconnecting the Reader/Writer From the Computer” is not

displayed, skip the rest of the procedure and immediately

disconnect the reader/writer.

For Macintosh

1 Connect the reader/writer, with a memory card

inserted, to your computer

The removable disk icon appears on the desktop.

When a volume label is assigned to the memory card, the

volume label will be displayed together with the removable

disk icon.

2 Use the removable disk icon to read or write data

on the memory card.

Removing a Memory Card

Notes

• Do not remove a memory card while the access indicator is

blinking. Doing so may cause damage to the data stored on

the memory card.

• Be sure to follow the steps described below.

Sony accepts no responsibility for any damage or loss that

results from removing a memory card without following the

procedure described below.

For Windows

1 Make sure the access indicator is not blinking.

2 Open [My Computer].

3 Right-click the removable disk icon, and select

[Eject].

4 Pull the memory card straight out.

For Macintosh

1 Close the files saved on the memory card, and exit

any currently running applications.

2 Make sure the access indicator is not blinking.

3 Drag the removable disk icon to the [Trash].

Alternatively, select the removable disk icon, access the

[File] menu on the menu bar, and select [Eject “Untitled”] *.

* Depending on the memory card, a different label than “Untitled”

may be shown.

4 Pull the memory card straight out.

Reading the Access Indicator

The access indicator changes according to the status of the

reader/writer, as follows:

Reader/writer status Access indicator

Memory Card inserted Lights up

Reading/writing data Blinks*

* Depending on your operating environment and the memory card you

are using, the access indicator may blink so quickly it appears to be lit.

Be careful not to misread the access indicator.

Note

If data cannot be read from or written to the memory card while

the access indicator is lit, make sure the card is fully inserted

into the slot.

Disconnecting the Reader/Writer

From the Computer

Notes

• Do not disconnect the reader/writer from the computer while

the access indicator is blinking. Doing so may cause damage

to the data stored on the memory card.

• Be sure to follow the steps described below.

Sony accepts no responsibility for any damage or loss that

results from disconnecting the reader/writer without

following the procedure described below.

For Windows

The following explanation is illustrated with screens from

Windows XP, and assumes that drive name E: is assigned to the

slot of the reader/writer.

The screens may differ for other Windows versions.

1 Click [Safely Remove Hardware] on the task tray,

located at the lower right corner of the screen.

2 Click [Safely remove USB Mass Storage Device -

Drives (E:)].

3 Make sure the message “The 'USB Mass Storage

Device' device can now be safely removed from

the system.” appears, and then disconnect the

reader/writer.

Note

The above steps are not required when removing a memory card

from the reader/writer.

When you remove a memory card, follow the steps under

“Removing a Memory Card”.

For Macintosh

1 Close the files saved on the memory card, and exit

any currently running applications.

2 Make sure the access indicator is not blinking.

3 Drag the removable disk icon to the [Trash].

Alternatively, select the removable disk icon, access the

[File] menu on the menu bar, and select [Eject “Untitled”]*.

* Depending on the memory card, a different label than “Untitled”

may be shown.

If no memory card is inserted into the reader/writer, skip

this step.

4 Disconnect the reader/writer from the computer.

Click this icon.

Task tray

The 'USB Mass Storage Device'

device can now be safely

removed from the system.

Troubleshooting

Before consulting your Sony representative, verify the following.

If the problem still persists, consult your local Sony dealer.

Problem

The computer does not

detect the reader/writer.

The removable disk icon

does not appear.

The memory card cannot be

accessed with Windows

Explorer or My Computer.

The computer does not

recognize the memory card

The read/write speed is

slow.

Technical Support

Local technical support service is only available in the

following sales regions.

sFor customers in the USA (Sony Electronics Inc.)

Monday to Saturday,

8:00 a.m. - 8:00 p.m. CT

• Toll free: 1-800-588-3847

• Free telephone support is offered for 90 days after your first

call.

USA technical support only: Web- based technical support

is free and available 24 hours a day, 7 days a week.

• Web site:

http://sony.storagesupport.com/

Warranty Card

• A warranty card should be provided with this product at the

place of purchase.

• Please read the warranty card, fill in the specified information,

and retain it for future reference.

• The warranty period is one year from the date of purchase.

Caution

The warranty and technical support service are valid only in the

countries or sales regions specified on the warranty card.

Notes for Windows

• On some computers, a message may appear asking you to

insert the operating system disc. When this happens, follow

the computer’s instructions.

• On some computers, the “HI-SPEED USB Device plugged into

non-HI-SPEED USB Hub” message may appear, indicating

that a hi-speed USB device has been connected to a USB port

which does not support hi-speed USB. If your computer has

multiple USB ports, try connecting to a different port.

Otherwise, close the message and continue using the reader/

writer with the current port.

•Follow the steps below to turn off the write cache

setting for removable disk drives. Leaving this

setting on may cause the reader/writer to

malfunction.

– On Windows Vista:

Open the following items in the following order: [Start] button

– [Control Panel] – [System and Maintenance] – [Device

Manager] button (When clicking on [Device Manager] button,

the User Account Control window will appear, click on

[Continued]) – [Disk drives] – [Sony Card_R/W USB Device].

On the [Policies] tab in the properties dialog box that appears,

make sure that [Optimize for quick removal] is selected.

– On Windows XP:

Open the following items in the following order: [Start] button

– [Control Panel] – [Performance and Maintenance] – [System]

– [Hardware] tab – [Device Manager] button – [Disk drives] –

[Sony Card_R/W USB Device]. On the [Policies] tab in the

properties dialog box that appears, make sure that [Optimize

for quick removal] is selected.

– On Windows 2000:

Open the following items in the following order: [Start] button

– [Settings] – [Control Panel] – [System] – [Hardware] tab –

[Device Manager] button – [Disk drives] – [Sony Card_R/W

USB Device]. On the [Disk Properties] tab in the properties

dialog box that appears, make sure the [Write Cache enabled]

check box is not selected.

Reading and Writing Data on a Memory Card

For Windows

The following explanation is illustrated with screens from

Windows XP.

The screens may differ for other Windows versions.

1 Open [My Computer].

2 Make sure the removable disk icons appear in [My

Computer].

Drive letter for the removable disk icon is assigned in

alphabetical order to the memory card slot.

For example, if the computer has an A:, C: and D: drive

before connecting the reader/writer, the drive letters will be

assigned as E: when the reader/writer is connected:

3 Use the removable disk icon to read or write data

on the memory card.

If the following message appears, the memory card has not

been recognized correctly, remove the card and insert it

again.

Product specificaties

Merk:	Sony
Categorie:	Niet gecategoriseerd
Model:	MRW68E-D1
Kleur van het product:	Zwart
Gewicht:	11 g
Compatibele geheugenkaarten:	Memory Stick (MS), microSDHC, miniSD, miniSDHC, MMCmicro, MS Duo, MS PRO Duo, MS Pro-HG, SD, SDHC
Soort voeding:	DC
Temperatuur bij opslag:	-30 - 60 °C
Intern:	Nee
Compatibele besturingssystemen:	Windows 7\nWindows Vista\nWindows XP\nWindows 2000\nMac OS X 10.2
Soort aansluiting:	USB 2.0
Afmetingen (B x D x H):	31.7 x 57 x 11.2 mm
Overdrachtssnelheid:	480 Mbit/s
Bedrijfstemperatuur (T-T):	5 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	30 - 80 procent