Sony MEU-WX2 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Sony MEU-WX2 (36 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 8 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/36
2-593-351-E2 (1)
Multiformat
Engine Unit
© 2005 Sony Corporation
MEU-WX2
Operating Instructions
2
Owner’s Record
The model and serial numbers are located at the bottom.
Record these numbers in the spaces provided below.
Refer to these numbers whenever you call upon your
Sony dealer regarding this product.
Model No. ____________________
Serial No. ____________________
WARNING
To prevent fire or shock hazard, do not expose the unit to
rain or moisture.
Dangerously high voltages are present inside the unit.
Do not open the cabinet. Refer servicing to qualified
personnel only.
In the event of a malfunction or when maintenance is
necessary, consult an authorized Sony dealer.
This unit contains substances which can pollute the
environment if disposed carelessly.
Please contact our nearest representative office or your
local environmental office in case of disposal of this
unit.
WARNING
THIS APPARATUS MUST BE EARTHED.
For the customers in Europe
This product with the CE marking complies with both
the EMC Directive (89/336/EEC) and the Low Voltage
Directive (73/23/EEC) issued by the Commission of the
European Community.
Compliance with these directives implies conformity to
the following European standards:
• EN60950: Product Safety
• EN55103-1: Electromagnetic Interference (Emission)
• EN55103-2: Electromagnetic Susceptibility
(Immunity)
This product is intended for use in the following
Electromagnetic Environment: E4 (controlled EMC
environment, ex. TV studio).
For the Customers in the USA
This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference when the equipment is operated in a
commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction
manual, may cause harmful interference to radio
communications. Operation of this equipment in a
residential area is likely to cause harmful interference in
which case the user will be required to correct the
interference at his own expense.
You are cautioned that any changes or modifications not
expressly approved in this manual could void your
authority to operate this equipment.
The shielded interface cable recommended in this
manual must be used with this equipment in order to
comply with the limits for a digital device pursuant to
Subpart B of Part 15 of FCC Rules.
For customers in Canada
This Class A digital apparatus complies with Canadian
ICES-003.
Pour les utilisateurs au Canada
Cet appareil numérique de la classe A est conforme à la
norme NMB-003 du Canada.
Warning on power connection
Use a proper power cord for your local power supply.
1) Use an appropriate rating plug which is applied to local regulations.
The United States,
Canada
Continental Europe UK, Ireland, Australia,
New Zealand
Japan
Plug type VM0233 COX-07/636 _ 1) YP332
Female end VM0089 COX-02/VM0310B VM0303B YC-13
Cord type SVT H05VV-F CEE(13)53rd (O, C) VCTF
Rated Voltage &
Current
10A/125V 10A/250V 10A/250V 7A/125V
Safety approval UL/CSA VDE VDE DENAN
3
Attention-when the product is installed in Rack:
1.Prevention against overloading of branch
circuit
When this product is installed in a rack and is supplied
power from an outlet on the rack, please make sure that
the rack does not overload the supply circuit.
2.Providing protective earth
When this product is installed in a rack and is supplied
power from an outlet on the rack, please confirm that the
outlet is provided with a suitable protective earth
connection.
3.Internal air ambient temperature of the rack
When this product is installed in a rack, please make
sure that the internal air ambient temperature of the rack
is within the specified limit of this product.
4.Prevention against achieving hazardous
condition due to uneven mechanical loading
When this product is installed in a rack, please make
sure that the rack does not achieve hazardous condition
due to uneven mechanical loading.
5.Install the equipment while taking the
operating temperature of the equipment into
consideration
For the operating temperature of the equipment, refer to
the specifications of the Operation Manual.
6.When performing the installation, keep the
rear of the unit 10 cm (4 inches) or more away
from walls in order to obtain proper exhaust
and radiation of heat.


Product specificaties

Merk: Sony
Categorie: Niet gecategoriseerd
Model: MEU-WX2

Heb je hulp nodig?

Als je hulp nodig hebt met Sony MEU-WX2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Sony

Sony

Sony LCS-VCC Handleiding

22 November 2024
Sony

Sony LCM-CSVH Handleiding

22 November 2024
Sony

Sony CLP-NWU30 Handleiding

22 November 2024
Sony

Sony CKM-NWE010 Handleiding

22 November 2024
Sony

Sony CKS-NWS610 Handleiding

22 November 2024
Sony

Sony MSAC-HGA8 Handleiding

22 November 2024
Sony

Sony BP-GL95 Handleiding

1 Oktober 2024
Sony

Sony BP-GL65 Handleiding

1 Oktober 2024
Sony

Sony BP-L80S Handleiding

1 Oktober 2024
Sony

Sony PDT-FP1 Handleiding

6 Augustus 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd