Sony HDFA-200 Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Sony HDFA-200 (35 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 11 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/35
OPERATION MANUAL [English]
1st Edition (Revised 1)
HD OPTICAL FIBER ADAPTOR UNIT
HDFA-200
2
Before operating the unit, please read this manual thoroughly
and retain it for future reference.
To reduce the risk of fire or electric shock,
do not expose this apparatus to rain or
moisture.
To avoid electrical shock, do not open the
cabinet. Refer servicing to qualified
personnel only.
Afin de réduire les risques d’incendie ou
d’électrocution, ne pas exposer cet
appareil à la pluie ou à l’humidité.
Afin d’écarter tout risque d’électrocution,
garder le coffret fermé. Ne confier
l’entretien de l’appareil qu’à un personnel
qualifié.
Um die Gefahr von Bränden oder
elektrischen Schlägen zu verringern, darf
dieses Gerät nicht Regen oder Feuchtigkeit
ausgesetzt werden.
Um einen elektrischen Schlag zu
vermeiden, darf das Gehäuse nicht
geöffnet werden. Überlassen Sie
Wartungsarbeiten stets nur qualifiziertem
Fachpersonal.
For the customers in the U.S.A.
This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is
operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own
expense.
You are cautioned that any changes or modifications not
expressly approved in this manual could void your authority to
operate this equipment.
All interface cables used to connect peripherals must be
shielded in order to comply with the limits for a digital device
pursuant to Subpart B of Part 15 of FCC Rules.
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must
accept any interference received, including interference that
may cause undesired operation.
For the customers in Canada
This Class A digital apparatus complies with Canadian ICES-
003.
Pour les clients au Canada
Cet appareil numérique de la classe A est conforme à la
norme NMB-003 du Canada.
For the customers in Europe
This product is intended for use in the following
Electromagnetic Environments: E1 (residential), E2
(commercial and light industrial), E3 (urban outdoors), E4
(controlled EMC environment, ex. TV studio).
Pour les clients en Europe
Ce produit est prévu pour être utilisé dans les environnements
électromagnétiques suivants : E1 (résidentiel), E2
(commercial et industrie légère), E3 (urbain extérieur) et E4
(environnement EMC contrôlé, ex. studio de télévision).
FĂĽr Kunden in Europa
FĂĽr die folgenden elektromagnetischen Umgebungen: E1
(Wohnbereich), E2 (kommerzieller und in beschränktem
MaĂźe industrieller Bereich), E3 (Stadtbereich im Freien) und
E4 (kontrollierter EMV-Bereich, z.B. Fernsehstudio).
AVERTISSEMENT
WARNUNG
WARNING
3
This HD Optical Fiber Adapter Unit is classified as a CLASS 1
LASER PRODUCT.
Dieser HD Optical Fiber Adapter Unit ist als LASERPRODUKT
DER KLASSE 1 eingestuft.
Tämä HD Optical Fiber Adapter Unit on luokiteltu 1. LUOKAN
LASERTUOTTEEKSI.PRODUCT.
Den här HD Optical Fiber Adapter Unit klassificeras som en
LASERPRODUKT AV KLASS 1.
CAUTION
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous
radiation exposure.
CAUTION
The use of optical instruments with this product will increase
eye hazard.
Laser Diode Properties
Wave length: 1310 ±40 nm
Emission duration: Pulse Modulation
Laser output power: 141 ÎĽW
IEC60825-1(2007) & IEC60825-1(2014)
Daten der Laserdiode
Wellenlänge: 1310 ±40 nm
Emissionsdauer: Pulsmodulation
Laser-Ausgangsleistung: 141 ÎĽW
IEC60825-1(2007) & IEC60825-1(2014)
Egenskaber for laserdiode
Bølgelængde: 1310 ±40 nm
StrĂĄlingsvarighed: Pulse Modulation
Afgivet lasereffekt: 141 ÎĽW
IEC60825-1(2007) & IEC60825-1(2014)
Laserdiod - Egenskaper
Våglängd:1310 ±40 nm
StrĂĄlningens varaktighet:Pulsmodulering
Laseruteffekt:141 ÎĽW
IEC60825-1(2007) & IEC60825-1(2014)
Egenskaper for laserdiode
Bølgelengde: 1310 ±40 nm
StrĂĄlingsvarighet: Pulsmodulasjon
Utgangseffekt for laser:141 ÎĽW
IEC60825-1(2007) & IEC60825-1(2014)
For the customers in Taiwan only
+37
–29
+37
–29
+37
–29
+37
–29
+37
–29


Product specificaties

Merk: Sony
Categorie: Niet gecategoriseerd
Model: HDFA-200
Kleur van het product: Zwart
Soort: AV-zender
Connectiviteitstechnologie: Bedraad
Maximum resolutie: 1920 x 1080 Pixels
Maximaal 30 frames per seconde: 50 fps
Bandbreedte: 1.5 Gbit/s

Heb je hulp nodig?

Als je hulp nodig hebt met Sony HDFA-200 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Sony

Sony

Sony LCS-VCC Handleiding

22 November 2024
Sony

Sony LCM-CSVH Handleiding

22 November 2024
Sony

Sony CLP-NWU30 Handleiding

22 November 2024
Sony

Sony CKM-NWE010 Handleiding

22 November 2024
Sony

Sony CKS-NWS610 Handleiding

22 November 2024
Sony

Sony MSAC-HGA8 Handleiding

22 November 2024
Sony

Sony BP-GL95 Handleiding

1 Oktober 2024
Sony

Sony BP-GL65 Handleiding

1 Oktober 2024
Sony

Sony BP-L80S Handleiding

1 Oktober 2024
Sony

Sony PDT-FP1 Handleiding

6 Augustus 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd