Sony HDCU-1700 Handleiding

Sony Niet gecategoriseerd HDCU-1700

Lees hieronder de 📖 handleiding in het Nederlandse voor Sony HDCU-1700 (43 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 12 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/43

OPERATION MANUAL [English]

1st Edition (Revised 4)

HD CAMERA CONTROL UNIT

HDCU1700

4K/HDR PROCESSOR BOARD

HKCU2040

3G/HD SDI OUTPUT EXPANSION UNIT

HKCU2007

SD ENCODER UNIT

HKCU1001

MULTI INTERFACE UNIT

HKCU1003

Table of Contents

Overview .....................................................................3

System Configuration................................................5

Basic System Components ............................................. 5

System Operation Example............................................. 6

Locations and Functions of Parts ............................7

Front Panel...................................................................... 7

Rear Panel ...................................................................... 9

Internal Switches........................................................... 11

HKCU2040 4K/HDR Processor Board (optional) .......... 11

HKCU2007 3G/HD SDI Output Expansion Unit

(optional) .................................................................... 11

HKCU1001 SD Encoder Unit (optional) ........................ 12

HKCU1003 Multi Interface Unit (optional) ..................... 12

Connections and Settings.......................................15

Fiber Transmission System........................................... 15

4K/HDR output system.................................................. 16

Status Display ..........................................................17

Displaying the Status Screen ........................................ 17

Status Display Screen ................................................... 17

Setup Menu...............................................................21

Changing Menu Item Settings ....................................... 21

Menu Tree ..................................................................... 23

Menu List ....................................................................... 26

Appendix...................................................................39

Notes on Use................................................................. 39

Error Messages ............................................................. 39

Specifications...........................................................40

HDCU1700 .................................................................... 40

HKCU2040 (optional) .................................................... 41

HKCU2007 (optional) .................................................... 41

HKCU1001 (optional) .................................................... 42

HKCU1003 (optional) .................................................... 42

Overview

The HDCU1700 Camera Control Unit is connected to a Sony

HDC1700 high-definition video camera. It carries out signal

processing and provides an interface for external equipment.

This unit may be combined with an MSU-1000 series Master

Setup Unit (optional) or an RCP-1000 series Remote Control

Panel (optional) to form a camera control system. Further, a

system capable of controlling multiple video cameras can be

configured by adding a CNU-700 Camera Command Network

Unit.

The HDCU1700 has the following major features.

Front panel for increased usefulness

The HDCU1700 features a design that places menu operation

switches and status LEDs related to optical transmission, etc.,

on the front panel. These were moved from under the cover of

the HDCU1000/1500’s front panel, providing even greater

convenience.

Multiple video inputs and outputs

The HDCU1700 features the following standard-feature signal

input/output ports.

• Four SDI outputs (HD/SD switchable outputs)

• Three HD-SDI/SD-SDI/SD analog return inputs

• One teleprompter input

In addition, a variety of input/output interfaces are offered via

optional installable boards.

HKCU2040 4K/HDR Processor Board

This provides functions, such as changing the resolution from

the HD camera signal to 4K video, or video processing with the

high dynamic range (HDR)*1. 4K video can be output via the

Multi-Link 3G-SDI signal or 12G-SDI signal*2, or HD video can

be output via the 3G-SDI signal or HD-SDI signal.

*1 The high dynamic range (HDR) function will be supported

by the software version V3.10 or higher.

*2 12G-SDI output will be supported by the software version

V3.30 or higher.

HKCU2007 3G/HD SDI Output Expansion Unit

This provides four 3G/HD-SDI outputs.

Installing this board makes it possible to output up to four 3G/

HD-SDI signals.

HKCU1001 SD Encoder Unit

Installing this board makes it possible to output SD analog

composite signals (NTSC/PAL), SD picture monitor signals

and SD waveform monitor signals.

HKCU1003 Multi Interface Unit

This board consists of 3 types of VDA boards, and makes the

following input/output signals possible:

• Frame reference input and output to lock 2-3 pull-down

sequence

• SD analog component signal (RGB or Y/R-Y/B-Y) or SD

analog composite signal output

• SD analog composite signal (NTSC/PAL) output, SD picture

monitor signal output, SD waveform monitor signal output

External reference signals

The HDCU1700 can be locked to an external reference signal.

Either an HD tri-level sync signal or an SD sync (black burst)

signal may be used as the reference signal.

Built-in down converter

When the system is operating at a 59.94/50 Hz field

frequency, HD signals can be converted to SD component SDI

signals using the down converter. The output signal aspect

ratio may be set to 4:3 edge crop, 16:9 squeeze, or letter box.

The down converter has image enhancement, gamma control,

and matrix ON/OFF features, and can be controlled externally.

Built-in simplified up converter

The HDCU1700 has a simplified up converter to allow

monitoring of SD signal return video using an HD viewfinder.

The aspect ratio of the return video signal may be set to 4:3

edge crop, 16:9 squeeze, or letter box.

Digital Optical Transfer

The HDCU1700 may be connected to a camera using an

optical fiber cable (two single-mode optical fiber lines, two

power lines and two control lines) for the transmission of digital

video, audio, and control signals. By connecting together

optical fiber cables, signals may be transmitted up to a

maximum of 2,000 meters (6,600 feet). The maximum length

of the cable supplying power varies with the camera system

configuration and with the type of optical fiber cable.

The HDCU1700 supports standard digital optical transfer, and

when used with an HDC1700 camera, can support 1080/50I,

59.94I recording and more via just one optical cable.

Safety-oriented power supply

The HDCU1700 is designed for safety. When the power is

turned on, a low voltage is supplied at first. Only after it has

been verified that an appropriate camera is attached, the

normal 180 V DC power supply is activated. The power is not

supplied unless a camera is connected via an optoelectric

cable.

Also, the HDCU1700 is equipped with an alarm indicator to

warn of open or short circuits in the cable.

Wide range of audio functions

This unit has connectors for two-channel analog audio outputs

and a program audio input. Further, the HDCU1700 can use

an intercom system with two independent channels, and

supports four-wire and RTS/Clear-Com intercom systems.

For information on support for RTS/Clear-Com systems,

contact a Sony service or sales representative.

Remote control

The level and phases of this unit’s output signals can be

controlled remotely by an MSU-1000 series Master Setup

Unit.

Product specificaties

Merk:	Sony
Categorie:	Niet gecategoriseerd
Model:	HDCU-1700
Kleur van het product:	Zwart
Gewicht:	6700 g
Breedte:	202 mm
Diepte:	410 mm
Hoogte:	127 mm
Soort:	AV-zender
Connectiviteitstechnologie:	Bedraad
Maximum resolutie:	- Pixels
Temperatuur bij opslag:	-20 - 60 °C
BNC output ports:	6
BNC input ports:	7
RJ-45 invoer ports:	1
Maximaal bereik:	2000 m
AC-ingangsspanning:	100 - 240 V
AC-ingangsfrequentie:	50 - 60 Hz
Bedrijfstemperatuur (T-T):	-10 - 40 °C