Sony HDCE-200 Handleiding

Sony Niet gecategoriseerd HDCE-200

Lees hieronder de 📖 handleiding in het Nederlandse voor Sony HDCE-200 (25 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 13 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/25

CAMERA EXTENSION ADAPTOR

HDCE-200

OPERATION MANUAL [English]

1st Edition

Table of Contents

Overview ..........................................................................................3

Locations and Functions of Parts .................................................3

System Configuration Example .....................................................5

Usage Precautions ..........................................................................7

Installation environment....................................................................... 7

To prevent electromagnetic interference from portable communications

devices......................................................................................... 7

Precautions when changing the photograph format of the camera....... 7

Specifications..................................................................................8

Notice Concerning Software Governed

by the GNU GPL/LGPL.............................................................9

Overview / Locations and Functions of Parts

Overview

The Camera Extension Adaptor HDCE-200 is designed for

connecting a camera to a camera control unit (CCU) and

converting the link format between them from BNC to

optical fiber. Also, the HDCE-200 is used by connecting

the Baseband Processor Unit BPU4000 and supplies

power to the Camera System Adaptor CA4000.

Rack mount capable

The HDCE-200 can be installed in a standard EIA 19-inch

rack (up to three units in 3U space).

For details on rack mounting, contact a Sony Service

representative or Sales representative.

Locations and Functions

of Parts

Front panel

aPower switch

This switch controls power to the entire system including

the HDCE-200, video camera, etc. In the “@” position,

power is on. In the “a” position, power is off.

bPOWER indicators

When power is on, the MAIN indicator and CAM indicator

light up. When the CAM POWER switch on the Master

Setup Unit or the Remote Control Panel is pressed, only

the camera power is turned off and the CAM indicator goes

out.

When connecting the BPU4000, the CAM POWER cannot

be turned off.

cOPTICAL CONDITION indicators

Displays the optical signal receiving condition of the

HDCE-200 from a camera.

• Two green indicators light up (3rd and 4th indicators):

Reception is very good.

• One green indicator lights up (3rd indicator): Reception

is good.

• The yellow indicator lights up (2nd indicator):

Reception is poor.

• The red indicator lights up (1st indicator): Reception is

very poor.

1Power switch

2POWER indicators

3OPTICAL CONDITION indicators

5Status indicators

6MODE switch

4CABLE ALARM indicators

Product specificaties

Merk:	Sony
Categorie:	Niet gecategoriseerd
Model:	HDCE-200
Kleur van het product:	Zwart
Gewicht:	4700 g
Breedte:	145 mm
Diepte:	365 mm
Hoogte:	124 mm
Soort:	AV-zender
Connectiviteitstechnologie:	Bedraad
Maximum resolutie:	- Pixels
BNC output ports:	1
BNC input ports:	1