Sonneman Stix Plus 2794.03 Handleiding

Sonneman Verlichting Stix Plus 2794.03

Lees hieronder de 📖 handleiding in het Nederlandse voor Sonneman Stix Plus 2794.03 (2 pagina's) in de categorie Verlichting. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/2
March 7, 2016
©2016 SONNEMAN - A WAY OF LIGHT 1 of 2
LED Product Information and Warnings
Important
• Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance.
• Consult a qualied, licensed electrician to ensure correct branch circuit conductor.
• Please read all included assembly instructions and warnings carefully before installation. Contact
Customer Service if you have any questions or concerns. Before installation, please conrm that the xture
is compatible with your supply voltage and dimming system, if present.
• LEDs are highly sensitive electronic devices, and must be treated with care. Do not open any factory
sealed compartments, and avoid touching the LEDs with your hands or any object.
• Although all our xtures are equipped with protective devices, LED xtures are vulnerable to power surges
and supply variations. Do not install LED xtures on the same circuit as any motors, appliances, or HVAC
systems.
• Do not remove or bypass any LED Driver or Transformer that is provided with the xture, and do not
replace or substitute with another power supply.
• Remote LED Driver or Transformer installation must be done by a licensed electrician and in accordance
with local codes. Remote installations should be in an accessible location, as close to the xture as possible.
• Fixtures must be wired in parallel on independent leads; do not "daisy chain" multiple xtures together or
wire them in series.
• All factory-made splices and connections must remain intact. LED circuits are carefully designed and built,
and improper connections may damage the xture.
• The ends of coaxial pendant cords have been precisely stripped and split at the factory and must not be
eld cut. Excess cord or cable should be neatly coiled and reserved in the xture canopy.
• Any mounting hardware is provided for your convenience and should be used with discretion. Always use
the appropriate hardware for the mounting surface.
March 7, 2016
©2016 SONNEMAN - A WAY OF LIGHT 2 of 2
Assembly Instructions
INSTRUCTIONS D’INSTALLATION
Stix Plus Series - 4ft. LED Wall Bar, 5ft. LED Wall Bar, 6ft. LED Wall Bar, 8ft. LED Wall Bar
Important
• Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance.
• Consult a qualied, licensed electrician to ensure correct branch circuit conductor.
Consulter un électricien qualié pour vous assurer que les conducteurs de la dérivation sont adéquats.
1. Shut o power to the branch circuit conductor.
2. The LED transformer (A) must be installed in a remote and accessible location near the xture in accordance with local
electrical code (Fig. 1). You must use the appropriate wire gauge from the transformer to the xture to limit the voltage drop
to less than 5%. Make appropriate electrical connections using wire nuts:
a. Connect the LED transformer’s live wire (black) to the live supply wire.
b. Connect the LED transformer’s neutral wire (white) to the neutral supply wire.
3. Drill a small hole (B) in the wall behind the xture (C) and pull the low voltage transformer output wires through the wall.
4. Make appropriate electrical connections using wire nuts: Connect one of the xture wires to one of the transformer output
wires. Connect the other xture wire to the second transformer output wire. Carefully push connections and extra wires
back through the hole (B) in the wall.
5. Remove diuser (D) from xture (C). Attach the xture to the wall with anchors (E) and screws (F) through the holes in the
xture. Snap the diuser back into the xture.
6. Restore power to the branch circuit conductor.
Note
• This xture is dimmable with Electronic Low Voltage (Trailing-Edge) type dimmers only.
Care Instructions
• Dusting: Use a clean, dry cloth.
• Cleaning: To protect the nish, avoid any harsh abrasives or chemicals.
2790, 2791, 2792, 2794
E
F
D
C
B
A
Fig. 1

Product specificaties

Merk: Sonneman
Categorie: Verlichting
Model: Stix Plus 2794.03

Heb je hulp nodig?

Als je hulp nodig hebt met Sonneman Stix Plus 2794.03 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Verlichting Sonneman

Sonneman

Sonneman Suspenders SLS0164 Handleiding

12 November 2024
Sonneman

Sonneman Suspenders SLS0157 Handleiding

12 November 2024
Sonneman

Sonneman Stix Plus 2792.16 Handleiding

11 September 2024
Sonneman

Sonneman Stix 2771.16 Handleiding

11 September 2024
Sonneman

Sonneman Stix Plus 2794.03 Handleiding

11 September 2024
Sonneman

Sonneman Stix 2772.16 Handleiding

11 September 2024

Handleiding Verlichting

Nieuwste handleidingen voor Verlichting

Mazda

Mazda WL007C Handleiding

14 November 2024
BeamZ

BeamZ StarColor1280 Handleiding

14 November 2024
EMOS

EMOS ZM1400 Handleiding

14 November 2024
EMOS

EMOS ZM4401 Handleiding

14 November 2024
EMOS

EMOS ZM3416 Handleiding

14 November 2024
EMOS

EMOS ZM1405 Handleiding

14 November 2024
EMOS

EMOS ZM1402 Handleiding

14 November 2024
EMOS

EMOS ZM1403 Handleiding

14 November 2024
EMOS

EMOS ZM5192 Handleiding

14 November 2024
EMOS

EMOS ZM5191 Handleiding

14 November 2024