Shimano PD-T780 Handleiding
Shimano
Fietsaccessoire
PD-T780
Lees hieronder de π handleiding in het Nederlandse voor Shimano PD-T780 (2 pagina's) in de categorie Fietsaccessoire. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/2
Cleat types and using the pedals
WARNING
Do not use the pedals and cleats in any way other than
as described in these Service Instructions. The cleats
are designed to engage and release from the pedals
when the cleats and pedals are facing forward.
See below for instructions on how to install the cleats.
FAILURE TO FOLLOW THESE INSTRUCTIONS MAY
RESULT IN SERIOUS PERSONAL INJURY.
Single release mode cleats (SM-SH51) and multiple release
mode cleats (SM-SH56) are available for use with these
pedals.
Each type of cleat has its own distinctive features, so be
sure to read the Service Instructions carefully and select
whichever type of cleat best suits your riding style and the
terrain and riding conditions which you will encounter.
Engaging the cleats with the pedals
Press the cleats into the pedals with a forward and downward motion.
Releasing the cleats from the pedals
The method of release varies according to the type of cleats you are using.
(Check the model number and color of your cleats to determine the proper method of release.)
WARNING β To avoid serious injuries:
SPD pedals are designed so that you release them only when you β
intend to release. They are not designed to release automatically
at times such as when falling off the bicycle.
This is a safety measure to prevent you from losing balance and falling
off the bicycle as a result of your feet becoming
accidentally released from the pedals.
Use only SPD shoes with this product. Other types of shoes may not β
release from the pedals, or may release unexpectedly.
Use only Shimano cleats (SM-SH51/SM-SH56) and tighten the β
mounting bolts securely to the shoes.
Before attempting to ride with these pedals and shoes, make sure β
you understand the operation of the engagement/release mechanism for
the pedals and cleats (shoes).
Before you attempt to ride with these pedals and shoes, apply the β
brakes, then place one foot on the ground and practice engaging and
releasing each shoe from its pedal until you can do so naturally and with
minimal effort.
Ride on level ground ο¬ rst until you become adept at engaging and β
releasing your shoes from the pedals.
Before riding, adjust the spring tension of the pedals to your β
liking.
When riding at low speed or when there is a possibility that you might β
need to stop riding, (for example, when doing a U-turn, nearing an
intersection, riding uphill or turning a blind curve), release your shoes
from the pedal beforehand so that you can quickly put your feet onto the
ground at any time.
Use a lighter spring tension for attaching the pedal cleats when riding in β
adverse conditions.
Keep cleats and bindings clear of dirt and debris to ensure engagement β
and release.
Remember to check the cleats periodically for wear. When the cleats are β
worn, replace them.
Always check the spring tension after replacing the pedal cleats and
before riding. If you do not maintain both your shoes and cleats in
good condition, release and engagement to the pedals could become
unpredictable or difο¬ cult, which could result in severe injury.
Be sure to attach reο¬ ectors to the bicycle when riding at night. β
Do not continue riding the bicycle if the reο¬ ectors are dirty or damaged,
otherwise it becomes more difο¬ cult for oncoming vehicles to see you.
Obtain and read the service instructions carefully prior to installing β
the parts. Loose, worn, or damaged parts may cause serious injury to
the rider.
We strongly recommend only using genuine Shimano
replacement parts.
If you have any questions concerning your pedals, contact a β
professional dealer.
Read these Technical Service Instructions carefully, and keep β
them in a safe place for later reference.
BE SURE TO READ AND FOLLOW THE ABOVE WARNINGS β
CAREFULLY.
If the warnings are not followed, your shoes may not come out of β
the pedals when you intend or they may come out unexpectedly or
accidentally, and severe injury may result.
NOTE:
Before riding the bicycle, check that there is no play or looseness in β
the connection. Also, be sure to retighten the crank arms and pedals at
periodic intervals.
In addition, if pedaling performance does not feel normal, check this β
once more.
Parts are not guaranteed against natural wear or deterioration resulting β
from normal use.
For maximum performance we highly recommend Shimano lubricants β
and maintenance products.
General Safety Information
SI-46P0A-001
PD-T780 SPD Pedals
Technical Service Instructions
Attaching the cleats
1.
With a pair of pliers or a similar tool, pull off the rubber cover to
expose the cleat mounting holes.
Note:
This step may not be necessary depending
on the type of shoes.
2.
Remove the sockliner and position a cleat nut over the oval holes.
Note:
This step may not be necessary
depending on the type of shoes.
Rubber cover for
cleat mounting holes
SPD shoe
Cleat nut
Sockliner
From the bottom of the shoe, position a cleat and then a cleat adapter
3.
over the cleat holes. The cleats are compatible with both left and right
pedals. Provisionally tighten the cleat mounting bolts.
Provisional tightening torque
for cleat mounting bolts:
2.5 N m {22 in. lbs.} β’
4 mm Allen key
Cleat mounting bolts
Cleat adapter Cleat
Position the triangular
portion of the cleat toward
the front of the shoe.
Front
Adjusting the cleat position
The cleat has an adjustment range of 20 mm front to
1.
back and 5 mm right to left.
After provisionally tightening the cleat, practice
engaging and releasing, one shoe at a time. Readjust
to determine the best cleat position.
After you have determined the best cleat position,
2.
ο¬ rmly tighten the cleat mounting bolts with a 4 mm
Allen key.
Tightening torque:
5 β 6 N m {44 β 52 in. lbs.}β’
Waterproof seal
Remove the sockliner and attach the waterproof seal.
Note:
The waterproof seal is
supplied with Shimano shoes
which require this step to be
carried out.
Mounting the pedals on the crank arms
Use an 8mm Allen key to mount the pedals on the crank arms.
The right pedal has a right-hand thread; the left pedal has a left-hand
thread.
Tightening torque:
35 β 55 N m {305 β 479 in. lbs.}β’
8 mm Allen key
Adjusting the spring tension of the binding
The spring force is adjusted by means of adjustment bolts.
The adjustment bolts are located behind each of the bindings, and there
is one adjustment bolt on each pedal. Equalize the tensions by referring
to the adjustment plates and by counting the number of turns of the
adjustment bolts. The spring tension can be adjusted in four steps for
each turn of the adjustment bolt.
1
2
1
2
Adjustment bolt
Adjustment plate
Adjustment bolt
3 mm Allen key
Increase
Decrease
When the adjustment bolt is turned clockwise, the spring tension increases,
and when it is turned counterclockwise, the spring tension decreases.
Adjustment bolt
Adjustment plate
Strongest position Weakest position
If the adjustment plate is at the strongest or the weakest position,
do not turn the adjustment bolt any further.
Note:
In order to prevent accidental release from occurring, make sure all β
the spring tensions are properly adjusted.
The spring tensions should be adjusted equally for both right and β
left pedals. If they are not adjusted equally, it can cause the rider
difficulty to engage or release from the pedals.
If the adjustment bolt is completely withdrawn from the spring plate, β
disassembly and reassembly will be required. If this occurs, ask a
professional dealer for assistance.
Reο¬ ector replacement (optional)
1. Use Phillips screwdriver (No.2) to remove the reο¬ ector ο¬ xing bolt.
2. Slide out the reο¬ ector ο¬ xing plate.
3. Replace the reο¬ ector and slide in the reο¬ ector ο¬ xing plate.
Firmly tighten the reο¬ ector ο¬ xing bolt.
Phillips screwdriver
(No.2)*
Reflector fixing plate
Reflector fixing bolt
Reflector Tightening torque:
0.8 N m {7 in. lbs.}β’
* Phillips screwdriver (No.2) is a registered
trademark of Phillips Screw Company, Inc.
Cleat replacement
Cleats wear out over time and should be replaced periodically. Cleats
should be replaced when it becomes difο¬ cult to release, or it starts to
release with much less effort than the when it was in new condition.
Waterproof seal
Sockliner
Β© Mar. 2011 by Shimano Inc. AWS. Printed in Malaysia
β Single release mode cleats:
SM-SH51 (black/Optional accessory)
These cleats only release when the heel is twisted .outward
They will not release if the heel is twisted in any other direction.
You are able to apply upward force to the pedal, since they will not
release unless the foot is twisted outward.
The cleats will not necessarily release if you lose your balance.
Accordingly, for places and conditions where it looks as though you
may lose balance, make sure that you have sufο¬ cient time to release
the cleats beforehand.
When you are pedaling vigorously, your heel may inadvertently twist
outward and this may cause the cleat to release accidentally. If the
cleat releases by accident, you may fall off the bicycle and serious
injury may result.
You can help to prevent this by adjusting the amount of force required
to release the cleats, and you should practice until you are accustomed
to the amount of force and the angle required to release the cleats.
Single release mode
Release the cleats from the pedals by twisting
your heels outward.
Note:
It is necessary to practice releasing
until you become accustomed to
the technique.
β Multiple release mode cleats:
SM-SH56 (gold/silver)
The cleats can be released by twisting in any direction.
Because the cleats can also be released by lifting your heel, they may
become accidentally released when applying upward force on the
pedals.
These cleats should not be used for riding style which may involve
pulling up on the pedals or for activities, such as jumping, in which
pulling forces are applied to the pedals causing possible release from
the pedals.
Although the cleats can be released by twisting your heels in any
direction or by lifting, they will not necessarily release if you lose your
balance.
Accordingly, for places and conditions where it looks as though you
may lose balance, make sure that you have sufο¬ cient time to release
the cleats beforehand.
If the cleats release by accident, you may fall off the bicycle and
serious injury may result.
If the features of multiple release mode cleats are not sufο¬ ciently
understood and if they are not used correctly, then they may release
accidentally with a greater frequency than for single release mode
cleats.
You can help to prevent this by adjusting the amount of force required
to release the cleats in any direction, and you should practice until
you are accustomed to the amount of force and the angle required to
release.
Multiple release mode
Release the cleats from the pedals by twisting
your heels in any direction.
Note:
In multiple release mode, it is
necessary to practice releasing
until you become accustomed
to the technique. Releasing
by lifting your heel requires
particular practice.
SI-46P0A-001-00
* Service Instructions in further languages are available at :
http://techdocs.shimano.com
Please note: Speciο¬ cations are subject to change for improvement without
notice. (English)
3-77 Oimatsu-cho, Sakai-ku, Sakai-shi, Osaka 590-8577, Japan
Industrieweg 24, 8071 CT Nunspeet, The Netherlands Phone: +31-341-272222
One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003
SHIMANO AMERICAN CORPORAT ION
SHIMANO EUROPE B.V.
SHIMANO INC.
These pedals have an SPD-type face on one side and a standard face on
the other side.
Product specificaties
| Merk: | Shimano |
| Categorie: | Fietsaccessoire |
| Model: | PD-T780 |
| Kleur van het product: | Zwart |
| Aantal per verpakking: | 2 stuk(s) |
| Materiaal steel: | Staal |
Heb je hulp nodig?
Als je hulp nodig hebt met Shimano PD-T780 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Fietsaccessoire Shimano
15 November 2024
15 November 2024
12 Juni 2023
9 Juni 2023
8 Juni 2023
6 Juni 2023
4 Juni 2023
23 Mei 2023
22 Mei 2023
21 Mei 2023
Handleiding Fietsaccessoire
- Fietsaccessoire Garmin
- Fietsaccessoire Abus
- Fietsaccessoire Axa
- Fietsaccessoire Bobike
- Fietsaccessoire Bontrager
- Fietsaccessoire Dnt
- Fietsaccessoire Eufab
- Fietsaccessoire Fiamma
- Fietsaccessoire Giant
- Fietsaccessoire Hema
- Fietsaccessoire Knog
- Fietsaccessoire Master Lock
- Fietsaccessoire Nedis
- Fietsaccessoire Powerfix
- Fietsaccessoire Prophete
- Fietsaccessoire SECURITY Plus
- Fietsaccessoire Silverline
- Fietsaccessoire Stanley
- Fietsaccessoire Tacx
- Fietsaccessoire Thule
- Fietsaccessoire Trelock
- Fietsaccessoire Crivit
- Fietsaccessoire Kayoba
- Fietsaccessoire Stoy
- Fietsaccessoire Blackburn
- Fietsaccessoire Lezyne
- Fietsaccessoire Topeak
- Fietsaccessoire Vaude
- Fietsaccessoire Spokey
- Fietsaccessoire Evoc
- Fietsaccessoire Polisport
- Fietsaccessoire Ergon
- Fietsaccessoire SKS
- Fietsaccessoire SBS
- Fietsaccessoire Basil
- Fietsaccessoire Valk
- Fietsaccessoire MET Helmets
- Fietsaccessoire IXS
- Fietsaccessoire Park Tool
- Fietsaccessoire MOTO
- Fietsaccessoire Kemo
- Fietsaccessoire KLICKfix
- Fietsaccessoire AARON
- Fietsaccessoire Pletscher
- Fietsaccessoire Funn
Nieuwste handleidingen voor Fietsaccessoire
26 September 2024
18 Augustus 2024
30 Juli 2024
11 Juni 2024
11 Juni 2024
11 Juni 2024
4 Mei 2024
3 Mei 2024
5 Maart 2024
5 Maart 2024