Shelly Vintage Handleiding

Shelly Smarth home Vintage

Lees hieronder de 📖 handleiding in het Nederlandse voor Shelly Vintage (2 pagina's) in de categorie Smarth home. Deze handleiding was nuttig voor 70 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

INITIAL INCLUSION

Install the Shelly to the light socket. Press the switch/button to

which Shelly is connected. The Shelly should turn on. Press the

switch/button again and Shelly will turn off. You may choose if

you want to use Shelly with the Shelly Cloud mobile application

and Shelly Cloud service. You can also familiarize yourself with

the instructions for Management and Control through the em-

bedded Web interface.

FACTORY RESET

You can return your Shelly Vintage to its factory settings by

switching the switch/button to which the bulb is connected 5

times. You need to wait 3 seconds after every switch off and 1

second after every switch on. If your bulb is successfully reset

it will blink few times and then turn the light on. If unsuccessful

please contact our support at support@shelly.cloud!

THE SHELLY CLOUD MOBILE APPLICATION

Shelly Cloud gives you the opportunity to control and adjust all

Shelly® devices from anywhere in the world. All you need is

an Internet connection and our mobile application, installed on

your smartphone or tablet.

Registration

The rst time you load the Shelly Cloud mobile app, you have to

create an account which can manage all your Shelly® devices.

Forgotten Password

In case you forget or lose your password, just enter the e-mail

address you have used in your registration. You will then re-

ceive instructions to change your password.

⚠WARNING! Be careful when you type your e-mail address

during the registration, as it will be used in case you forget

your password.

After registering, create your rst room (or rooms), where you

are going to add and use your Shelly devices.

Shelly Cloud gives you opportunity to create scenes for auto-

matic turning on or off of the Devices at predened hours or

based on other parameters like temperature, humidity, light etc.

Shelly Cloud allows easy control and monitoring using a mobile

phone, tablet or PC.

Device Inclusion

To add a new Shelly device, connect it to the power grid.

Step 1

Install your Shelly into the light socket and turn the light on.

⚠WARNING! In case the Device has not created its own WiFi

network with SSID like check if you shellyvintage-764CF7

have power connected to Shelly. If you do not see an active

WiFi network with SSID like , you need shellyvintage-764CF7

to reset your Shelly Bulb to its factory settings and try again.

Step 2

Choose “Add Device”. In order to add more devices later, use

the app Menu at the top right corner of the main screen and

click “Add Device”. Type the name (SSID) and password for the

WiFi network, to which you want to add the Device.

Step 3

WiFi inclusion

If using iOS: you will see the following screen:

Open the Settings menu of your phone. Go to WiFi and con-

nect to the WiFi network created by Shelly, e.g.shellyvin-

tage-764CF7.

If using Android: your phone/tablet will automatically scan

and include all new Shelly devices in the WiFi network that

you are connected to.

Upon successful Device Inclusion to the WiFi network

you will see the following pop-up:

Step 4

Approximately 30 seconds after discovery of any new devices

оn the local WiFi network, а list will be displayed by default in

the “Discovered Devices” room.

Step 5

Enter the Discovered Devices and choose the Device you want

to include in your account.

Step 6

Enter a name for the Device (in the Device Name eld). Choose

a Room, in which the device has to be positioned. You can

choose an icon or add a picture to make it easier to recognize.

Press “Save Device”.

Step 7

To enable connection to the Shelly Cloud service for remote

control and monitoring of the Device, press “yes” on the fol-

lowing pop-up.

SHELLY DEVICE SETTINGS

After your Shelly device is included in the app, you can control

it, change its settings and automate the way it works. To switch

the Device on and off, use the Power button. To enter at the

details menu of the Device, click on it’s name. From the details

menu you may control the Device, as well as edit its appear-

ance and settings.

Timer

Тo manage the power supply automatically, you may use:

• Auto OFF: After turning on, the power supply will automati-

cally shutdown after a predened time (in seconds). A value

of 0 will cancel the automatic shutdown.

• Auto ON: After turning off, the power supply will be auto-

matically turned on after a predened time (in seconds). A

value of 0 will cancel the automatic power-on.

Weekly Schedule

This function requires an Internet connection. To use Internet,

your Shelly has to be connected to a local WiFi network with an

active internet connection.

Shelly may turn on/off automatically at a predened time, at

sunrise/sunset, or at a specied time before or after sunrise/

sunset. Multiple schedules are possible.

Night Mode

With this mode you can set a period of time and level of bright-

ness, in which any turning on will set the brightness to the

predened level. You must select a start & end time, with the

brightness level.

Internet/Security

• WiFi Mode - Client: Allows the device to connect to an avail-

able WiFi network. After typing the details in the respective

elds, press Connect.

• WiFi Client Backup: Add a backup WiFi network, in case

your primary one becomes unavailable.

• WiFi Mode - Acess Point: Congure Shelly to create a Wi-Fi

Access point. After typing the details in the respective elds,

press Create Access Point.

• Cloud: Enable or Disable connection to the Cloud service.

• Restrict Login: Restrict the web interface of Shely with a

User- name and Password. After typing the details in the

elds, press Restrict Shelly.

Settings

Power on default mode: this sets the default output state

when Shelly is powered.

• On: congure Shelly to turn on, when it has power.

• Off: congure Shelly to turn off, when it has power.

Restore last mode: congure Shelly to return to last state it was

in, when it has power.

Transition time: set the time (in miliseconds), for which Shelly

Vintage goes from 0% to 100%. The value can be from 0 to

5000 ms.

Firmware update: update the rmware of Shelly, when a new

version is released.

Time zone and geo-location: enable or disable the automatic

detection of time zone and geo-location.

Factory reset: return shelly to its factory default settings.

Device Reboot - Reboots the device.

Device information: here you can see the:

• Device id - unique id of shelly

• Device ip - the ip of shelly in your wi- network

THE EMBEDDED WEB INTERFACE

Even without the mobile app the Shelly device can be set and

controlled through a browser and WiFi connection of a mobile

phone, tablet or PC.

Abbreviations used

• Shelly-ID – the unique name of the device. It consists of 6

or more characters. It may include numbers and letters, for

example 35FA58.

• SSID – the name of the WiFi network, created by the device,

for example shellyvintage-35FA58.

• Access Point (AP) – the mode in which the device creates

its own WiFi connection point with the respective name

(SSID).

• Client Mode (CM) – the mode in which the device is con-

nected to another WiFi network.

Installation/Initial inclusion

Step 1 Install Shelly Vintage into the light socket and turn the

light on.

⚠WARNING! In case the Device has not created its own WiFi

network with SSID like shellyvintage-764CF7 check if you have

power connected to Shelly. If you do not see an active WiFi

network with SSID like shellyvintage-764CF7, you need to reset

your Shelly Bulb to its factory settings and try again.

Step 2 - When the light turns on, Shelly has created an own

WiFi network (own AP), with name (SSID) such as shellyvin-

tage-764CF7. Connect to it with your phone, tablet or PC.

Step 3 Type 192.168.33.1 into the address eld of your browser

to load the web interface of the Shelly device.

Home Page

This is the home page of the embedded web interface. If it has

been set up is correctly, you will see information about:

• Current power consumption, in Watts

• Current state (on/off)

• Current brightness level

• Current temperature of the light

• Power button

• Connection to Cloud

• Present time

• Settings

Internet/Security

• WiFi Mode - Client: Allows the device to connect to an avail-

able WiFi network. After typing the details in the elds, press

Connect.

• WiFi Client Backup: Add a backup WiFi network, in case

your primary one becomes unavailable.

• WiFi Mode - Acess Point: Congure Shelly to create a Wi-

Fi Access point. After typing the details in the elds, press

Create Access Point.

• Cloud: Enable or Disable connection to the Cloud service.

• Restrict Login: Restrict the web interface of Shely with a

Username and Password. After typing the details in the elds,

press Restrict Shelly.

• SNTP Server: You can set a custom SNTP Server. Type the

URL address and press Save.

Additional Features

Shelly allows control via HTTP from any other device, home au-

tomation controller, mobile app or server. For more information

about the REST control protocol, please visit www.shelly.cloud

or send a request to developers@shelly.cloud.

WARRANTY TERMS

1. The Device’s warranty term is 24 (twenty four) months, be-

ginning since the date of purchase by the End User. The Man-

ufacturer does is not responsible for extra warranty terms by

the Еnd Seller.

2. The Warranty is valid for the territory of EU. The warranty

is applicable in compliance with all relevant laws and users’

rights protections. The purchaser of the Device is entitled to

exercise his/her rights in accordance with all applicable laws

and regulations.

3. Warranty terms are provided by Allterco Robotics EOOD (re-

ferred hereinafter as the Manufacturer), incorporated under the

Bulgarian law, with address of registration 109 Bulgaria Blvd,

oor 8, Triaditsa Region, Soa 1404, Bulgaria, registered with

the Commercial Register kept by the Bulgarian Ministry of

Justice’s Registry Agency under Unied Identity Code (UIC)

202320104.

4. Claims regarding the Conformity of the Device with the terms

of the contract of sale shall be addressed to the Seller, in accor-

dance with its terms of sale.

5. Damages such as death or body injury, deterioration or dam-

ages to objects different from the defective product, caused by

a defective product, are to be claimed against the Manufacturer

using the contact data of the Manufacturer’s company.

6. The User may contact the Manufacturer at support@shelly.

cloud for operational problems that may be resolved remotely.

It is recommended that the User contact the Manufacturer be-

fore sending it for servicing.

7. The terms of removing defects depends on the commercial

terms of the Seller. The Manufacturer is not responsible for un-

timely servicing of the Device or for faulty repairs carried out by

unauthorized service.

8. When exercising their rights under this warranty, the User

must provide the Device with the following documents: receipt

and valid warranty card with date of purchase.

9. After a warranty repair has been carried out, the warranty

period is extended only for that period.

10. The warranty does NOT cover any damages to the Device

which occur in the following circumstances:

• When the Device has been used or wired inappropriately,

including inappropriate fuses, overpassing maximal values of

load and current, electric shock, short circuit or other prob-

lems in the power supply, the power grid or the radio network.

• When there is a non-compliance between warranty card

and/or without a purchase receipt, or attempted forgery of

these documents, including (but not limited to) the warranty

card or the documents proving the purchase.

• When there has been a self-repair attempt, (de)installation,

modication, or adaptation of the Device by unauthorized

persons.

• -Intentional or negligent improper handling, storing or trans

portation of the Device, or in the event of non-observance of

the instructions included in this warranty.

• When a non-standard power supply, network, or faulty De-

vices have been used.

• When damages occur which were caused regardless of the

Manufacturer, including but not limited to: oods, storms, re,

lightning, natural disasters, earthquakes, war, civil wars, other

force majeure, unforeseen accidents, robbery, water damage,

any damages made by ingress of liquids, weather conditions,

solar heating, any damages made by intrusion of sand, hu-

midity, high or low temperature, or air pollution.

• -When there are other reasons beyond manufacturing de

fect, including but not limited to: water damage, ingress of

liquid into the Device, weather conditions, solar overheating,

intrusion of sand, humidity, low or high temperature, air pol-

lution.[u1]

• -When there have been mechanical damages (forced open

ing, breaking, cracks, scratches or deformations) caused by

a hit, fall, or from another object, wrong use, or caused by not

following the instructions for use.

• When damage has been caused by exposing the Device to

severe outdoor conditions such as: high humidity, dust, too

low or too high temperature. Terms of proper storage are

specied in the User Manual.

• When damage has been caused by lack of maintenance by

the User, as specied in the User manual.

• When damage has been caused by faulty accessories, or

those not recommended by the Manufacturer.

• When damage has been caused by the use of non-original

spare parts or accessories not suitable for the specied De-

vice model, or after repairs and changes carried out by an

unauthorized service or person.

ENVIRONMENTAL PROTECTION

This marking on the device, accessories, or documenta-

tion indicates that the device and its electronic accesso-

ries (charger, USB cable) must be disposed only in spe-

cially designated locations.

This marking on the battery, the instruction manual, the

safety instructions, the warranty card or the packaging

indicates that the battery in the device must be disposed

only in specially designated locations.

Please follow the instructions for environmental protection and

proper disposal of the Device, its accessories, and its packag-

ing for the recycling of the materials for their further usage and

to keep the environment clean!

You can nd the latest version of the Shelly Vintage user guide

on this address:

https://shelly.cloud/knowledge-base/devices/shelly-vintage/

Product specificaties

Merk:	Shelly
Categorie:	Smarth home
Model:	Vintage

Heb je hulp nodig?

Als je hulp nodig hebt met Shelly Vintage stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Smarth home Shelly

Shelly Qubino Wave 1PM Mini Handleiding

30 September 2024

Shelly Wave Shutter Handleiding

28 Mei 2024

Shelly Wave i4 Handleiding

28 Mei 2024

Shelly Wave Pro 2 Handleiding

28 Mei 2024

Shelly Plus Un Handleiding

28 Mei 2024

Shelly Pro Dimmer 1PM Handleiding

28 Mei 2024

Shelly Wave Pro 1PM Handleiding

28 Mei 2024

Shelly Wave Pro 2PM Handleiding

28 Mei 2024

Shelly Pro Dimmer 2PM Handleiding

28 Mei 2024

Shelly Wave Pro 1 Handleiding

28 Mei 2024

Handleiding Smarth home

Nieuwste handleidingen voor Smarth home

TP Link KS230 V2 Handleiding

11 December 2024

Delta Dore Tywell Starter Handleiding

9 December 2024

Asus SmartHome Gateway HG100 Handleiding

9 December 2024

Hikvision DS-PI-D40/FM Handleiding

8 December 2024

Burg-Wachter Entry easy 7600 Handleiding

6 December 2024

Acer Halo Swing HSP5100G Handleiding

5 December 2024

TP Link Tapo S200B Handleiding

3 December 2024

Hager 80040001 Handleiding

2 December 2024

Hager XEM601 Handleiding

2 December 2024

Hager TYA661AN Handleiding

2 December 2024