SereneLife SLDS110SCE Handleiding

SereneLife Kluis SLDS110SCE

Lees hieronder de 📖 handleiding in het Nederlandse voor SereneLife SLDS110SCE (3 pagina's) in de categorie Kluis. Deze handleiding was nuttig voor 24 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
www.SereneLifeHome.com www.SereneLifeHome.com
Features:
• Easy to Program 3-8 Digit Personal Code Electronic Lock
• Solid Steel Construction
• Pry Resistant with Concealed Hinges
• 3 LED Indicator Lights (Green, Yellow, Red)
• Changeable Code and Easy Reset Button
• 2 Piece One-way Locking Bolts (0.78 inches)
• Supply the Override Key for Emergency Use
• Include the Protective Floor Mat
• Pre-drilled Mounting Holes with Two Expansion Bolts
• Can be Mounted to Walls or Floors
• Drawer safe, Used in Multiple Scenarios
• One Metal Steel Door Handle for Easy Open & Closing
What's in The Box:
• • (2) Emergency Keys (4) 1.5V AA Batteries (2) Install Screws (1) Desiccant
Technical Specs:
Construction Materials: Steel
Thickness: Door: 0.15", Body: 0.05" -inches
Battery Info: 1.5V AA Batteries
Number of Battery: 4 pcs
Battery Construction Material: Carbon Zinc Battery
Type of Battery: AA
Battery Voltage: 1.5 V
Milliamp Hours (mAh): 760mAh (50mA,1h/8h, 24h/d, 20±2°C/35.6°F, e.v.=1.0V
Battery Watt Hours (How Many): 0.915wh
Battery Cells: 1
Battery Weight: 0.04lbs / pcs (total 4 pcs)
Product Dimensions (L x W x H): 8.62" x 11.8" x 4.37" -inches
Do not keep emergency keys in your safe!
You've taken an important step in organizing and protecting your most valuable possessions.
Each series of our safe is professionally crafted and designed to ensure your safety.
Please take time to read and familiarize yourself with the proper operating procedures of
your new safe presented on the following pages.
Schematic drawing
Schematic drawing of control panel
1. Bolts
2. Reset Button
3. Battery Compartment
4. Knob (Master Key)
5. Emergency Lock Cover
6. Green Light
7. Red Light
8. Yellow Light
9. Conrming button
CAUTION: All drawings in this manual have been prepared based on the EA.
The exterior design or component positions of other models may be dierent from what is
indicated in the drawings, while the operation is the same.
OPENING YOUR SAFE FOR THE FIRST TIME
To open the safe for the rst time, please use the emergency key.
The operation in detail refers to opening the safe with the emergency key.
Remove the emergency lock cover, then insert the emergency key and turn it counter-
clockwise.
Turn the knob (master key) clockwise to open the door.
Caution: After nishing the operation, pull out the emergency key and keep it in a safe place.
1
2 3
45 6 7 8
9
Questions? Comments?
We are here to help!
Phone: (1) 718-535-1800
Email: support@pyleusa.com
A
B
C
C
www.SereneLifeHome.com www.SereneLifeHome.com
INSERTING THE BATTERIES
1. Open the door.
2. Insert 4 x AA batteries into the battery compartment.
3. Under normal conditions, both red and green lights are on at the same time.
It means the voltage is low, and you should insert new batteries.
Caution: Replace the 4 batteries by aligning them with the "+" and "-" signs.
You should reset the user's code after replacing the batteries.
OPENING THE DOOR
1. Input your user's code (3 to 8 digits). Each press results in one beep, and the
yellow light ashes.
2. Press " " or " " Conrming button; the green light will turn ON.#
3. Rotate the knob (master key) clockwise and pull outwards within 5 seconds to open the
door.
Caution: The user preset code is “ .” Please input the user code again if the yellow light 159
ashes with beeps.
CLOSING THE DOOR
Turn the knob (master key) counterclockwise to close the door.
AUTOMATIC LOCK
Three continuous wrong entries will activate the warning beeps.
CAUTION: The keypad will be disabled during the beeping. You can only stop the beeps by
opening the safe with the emergency key and cutting the power by removing the battery.
SETTING THE USER CODE
1. Open the safe, press the reset button, and start setting the code when the yellow light
goes on.
2. Input a new code (3-8 digits) and press the " " or " " button to conrm with beeps, #
indicating the acceptance and storage of the new code.
3. If the yellow light ashes with beeps, the code change is not effective, and you need to
try again.
SETTING THE MASTER CODE
1. Open the safe, input " " twice, and press the reset button. Start setting the code when 0
you hear beeps and the yellow light goes on.
2. Input the new master code (3-8 digits) and then press the " " or " " button to conrm. #
It will be conrmed by beeps, indicating successful setting.
3. If the yellow light ashes with beeps, it means the new code is invalid, and you should
try again.
OPENING THE SAFE WITH THE EMERGENCY KEY
When you rst receive the safe, or in case of electronic circuit malfunction or unknown
codes, you can use the emergency key to open the safe.
1. Remove the cover of the emergency lock.
2. Insert the emergency key, turn it counterclockwise, and then turn the knob (master key)
clockwise to open the door.
MOUNTING METHOD
A. Select a stable, dry, and secure location for your safe.
B. If bolting to a wall, ensure that your safe is resting on a supporting surface, such as the
oor or a shelf. Do not bolt your safe to both the oor and wall.
1. Place the safe in the selected location. Use a pencil to mark the mounting holes on the
oor or wall.
2. Move the safe and drill 2-inch-deep mounting holes (approximately 50mm) using the
appropriate drill bit.
3. Return the safe to its original position, aligning the mounting holes with the openings in
the safe. Insert the expansion bolts (included) through the holes and into the mounting
holes, then tighten them securely. For any assistance, please consult your local distributor.


Product specificaties

Merk: SereneLife
Categorie: Kluis
Model: SLDS110SCE

Heb je hulp nodig?

Als je hulp nodig hebt met SereneLife SLDS110SCE stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Kluis SereneLife

Handleiding Kluis

Nieuwste handleidingen voor Kluis