Seco-Larm DP-266-1C3Q Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Seco-Larm DP-266-1C3Q (16 pagina's) in de categorie Intercomsysteem. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
®
DP- -1C3Q 266
Wireless Video Door Phone
Manual
Features:
 Wireless operation camera and monitor can –
operate from up to ft (150 away 492 m)**
ï‚· Remotely and securely talk to visitors and
unlock doors gates via the monitor or
ï‚· Lightweight monitor can be carried around the
premises while talking to the visitor
ï‚· Connect up to two additional monitors and one
additional camera*
ï‚· Intercom calling between paired monitors*
ï‚· Camera has built-in IR LEDs for nighttime
operation
ï‚· Camera includes a built-in PIR sensor that
activates the camera and takes photos of the
visitor when they approach
ï‚· Monitor includes a kickstand and a charging base
ï‚· Camera powered by 9~16 VAC/5~16 VDC
ï‚· Monitor front door at any time
ï‚· Egress input
 170° wide field of view
 Adjustable camera pan and tilt angle up to 20° —
from centerline in any direction to allow for —
mounting variations
*Additional monitors and camera sold separately.
**Line- -sight range. Actual range may vary depending on the installation and operating environment. of
*
ENFORCER Wireless Video Door Phone
2 SECO-LARM U.S.A., Inc.
DP- -1C3Q266
Complete Kit
1x
Monitor (DP- -M3Q)* 266
1x
Camera (DP-266-CQ)*
1x
Monitor charging stand
1x
Monitor kick stand
1x
AC Power adapter with USB port
(for monitor)
1x
USB Cable
1x
Monitor battery
1x
Camera mounting hood bracket
1x
AC Power adapter with DC plug
(for camera)
1x
DC Jack with pigtail
1x
Camera battery
3x
Camera mounting screws
3x
Camera mounting screw anchors
1x
Camera screw
1x
Camera screw cover
1x
Manual
DP- - Q266 M3
Additional Monitor Unit
1x
Monitor (DP- -M3Q) 266 **
1x
Monitor charging stand
1x
Monitor kick stand
1x
AC Power adapter with USB port (for monitor)
1x
USB Cable
1x
Monitor battery
1x
Manual
DP- -CQ266
Additional Camera Unit
1x
Camera (DP-266-CQ) **
1x
Camera mounting hood bracket
1x
AC Power adapter with DC plug (for camera)
1x
DC Jack with pigtail
1x
Camera battery
3x
Camera mounting screws
3x
Camera mounting screw anchors
1x
Camera screw
1x
Camera screw cover
1x
Manual
Introduction ................................................................ 2
Parts List .................................................................... 2
Specifications ............................................................ 3
Overview .................................................................... 3
Display Overview ....................................................... 4
Installation Notes ....................................................... 4
Camera Wiring Diagram ............................................ 5
Sample Application .................................................... 5
Installation Camera 6–.................................................
Installation Monitor –............................................. 6~7
On-Screen Display Features ..................................... 8
Programming and Using the
On-Screen Display ........................................... 9~10
Programming the Advanced Settings 10~11................
Operating the Wireless
Video Door Phone ......................................... 12~13
Resetting the Camera and
Pairing a First Monitor ....................................13~14
Pairing Additional Monitors or Cameras ..................14
Tamper Alarm ..........................................................15
Troubleshooting .......................................................15
Warranty ................................................................... 16
The ENFORCER Wireless Video Door Phone is a convenient and secure way to monitor and
control an entryway, such as a door or gate, from up to 492 feet (150 meters) away.
When a guest or visitor presses the doorbell button on the camera unit, the homeowner can use
one of up to three lightweight, wireless LCD monitors to see whom is requesting entry, speak with
the caller, take a photo, and decide whether or not to grant entry. The video door phone can be
expanded with up to two additional monitors and one additional camera. If multiple monitors are set
up, then the system can also be used as an intercom system between each monitor.
*The DP- -1C3Q included monitor and camera are paired by default. 266
**Additional monitors and cameras are not paired by default. See "Pairing Additional Monitors or Cameras" on pg. 14.
ENFORCER Wireless Video Door Phone
SECO-LARM U.S.A., Inc. 3
33/8" (86mm)
MENU
EXIT
OK
Reset
Camera:
Wiring connections
(see pg. 5)
Reset button
Battery cover
Camera
IR LEDs
PIR Sensor
Speaker
Status LED
Doorbell
Microphone
Monitor:
Charging
indicator
Status LED
OK/Talk
Menu/Unlock
Exit/View
Microphone
Up
Down/Photo
Volume up/down
ON/OFF Button:
- Turn monitor
ON/OFF
- Standby mode
USB Connector
(Mini- B)
Camera angle
adjustment joystick
USB Connector
(not used)
Camera
Type
Color camera
Chip
CMOS
Resolution
480 TV Lines
Lens
2mm
Field of view
170°
Camera angle adjustment
Up to 20° any direction
Operating voltage
9~16 VAC/5~16 VDC
Relock delay
3/6/8 Seconds
Relay output
3A@250VAC/30VDC
Current
draw
Active
300mA@12VDC
Standby
15mA@12VDC
Battery
life
Active
~7 Hours
Standby
~60 Days
IR LED Range
5' (1.5m)
IR LED Frequency
940nm
PIR Detection range
9' (3m)
PIR Detection angle
60°
Dimensions
(with bracket)
511/16
"x31/8"x115/16"
(144x80x50 mm)
Weight
4.3-oz (122g)
Operating temperature
14°~122° F (-10°~50° C)
Monitor
Display
33
/8
" (86mm) TFT
Operating voltage
5VDC (adapter) or
3.7VDC (battery)
Current
draw
Active
370mA@3.7VDC
Standby
5mA@3.7VDC
Battery
life
Active
~2.5 Hours
Standby
~7 Days
Operating frequency
2402~2480 MHz
RF power
120mW
Wireless range
492' ( * 150m)
Dimensions
5"x33
/8"x7
/8"
(127x85x22 mm)
Weight
3.9-oz (110g)
Operating temperature
32°~104° F (0°~40° C)
*Line- -sight range. Actual range may vary depending on the of
installation and operating environment.


Product specificaties

Merk: Seco-Larm
Categorie: Intercomsysteem
Model: DP-266-1C3Q
Soort bediening: Knoppen
Kleur van het product: Zwart
Gewicht: 122 g
Breedte: 80 mm
Diepte: 50 mm
Hoogte: 144 mm
Kleur: Ja
AC-adapter ingangsspanning: 9 - 16 V
Beeldschermdiagonaal: 3.4 "
Connectiviteitstechnologie: Draadloos
Frequentieband: 2.402 - 2.480 GHz
Field of view (FOV) hoek: 170 °
Nachtvisie: Ja
LED-type: IR
Luidspreker: Ja
Ingebouwde luidsprekers: Ja
Certificering: FC, CE
Type beeldsensor: CMOS
Display technologie: TFT
Duurzaamheidscertificaten: RoHS
Stroomverbruik: 300 mA
Maximale afstand: 150 m
Aantal TV lijnen: 480
Binnenunit inbegrepen: Ja
Buitenunit inbegrepen: Ja
Aantal displays ondersteund: 3
Maximum aantal cameras ondersteund: 2
Stroomtype van binnenunit: DC
Bedrijfstemperatuur (T-T) hoofdmonitorstation: -10 - 50 °C
Stroomtype van buitenunit: AC/DC
Deurstationcontrole: Ja
Bewegingssensor detectiehoek: 60 °
Afmetingen deurstation (BxDxH): 127 x 22 x 85 mm

Heb je hulp nodig?

Als je hulp nodig hebt met Seco-Larm DP-266-1C3Q stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Intercomsysteem Seco-Larm

Handleiding Intercomsysteem

Nieuwste handleidingen voor Intercomsysteem

Elcom

Elcom REN410X Handleiding

17 November 2024
Akuvox

Akuvox MD06 Handleiding

17 November 2024
Vimar

Vimar K40930 Handleiding

16 November 2024
Somfy

Somfy V500 Handleiding

15 November 2024
Pentatech

Pentatech VT35 Handleiding

5 November 2024
Viking

Viking K-1700-3 Handleiding

30 September 2024
Viking

Viking E-50-SS Handleiding

30 September 2024
Viking

Viking E-50-WH Handleiding

30 September 2024