Schneider VW3A3725 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Schneider VW3A3725 (96 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 7 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/96
QGH66984.02
www.schneider-electric.com
A
ltivar Process ATV600
QGH66984 0 7/2020
Altivar Process ATV600
Altivar Process ATV600
Altivar Process ATV600
Altivar Process ATV600Altivar Process ATV600
Variable Speed Drives for
Variable Speed Drives for
Variable Speed Drives for
Variable Speed Drives for Variable Speed Drives for
Asynchronous and Synchronous Motors
Asynchronous and Synchronous Motors
Asynchronous and Synchronous Motors
Asynchronous and Synchronous MotorsAsynchronous and Synchronous Motors
BACnet MS/TP Manual - VW3A3725
BACnet MS/TP Manual - VW3A3725
BACnet MS/TP Manual - VW3A3725
BACnet MS/TP Manual - VW3A3725BACnet MS/TP Manual - VW3A3725
07/2020
2QGH66984 07/2020
The information provided in this documentation contains general descriptions and/or technical character-
istics of the performance of the products contained herein. This documentation is not intended as a
substitute for and is not to be used for determining suitability or reliability of these products for specific user
applications. It is the duty of any such user or integrator to perform the appropriate and complete risk
analysis, evaluation and testing of the products with respect to the relevant specific application or use
thereof. Neither Schneider Electric nor any of its affiliates or subsidiaries shall be responsible or liable for
misuse of the information contained herein. If you have any suggestions for improvements or amendments
or have found errors in this publication, please notify us.
You agree not to reproduce, other than for your own personal, noncommercial use, all or part of this
document on any medium whatsoever without permission of Schneider Electric, given in writing. You also
agree not to establish any hypertext links to this document or its content. Schneider Electric does not grant
any right or license for the personal and noncommercial use of the document or its content, except for a
non-exclusive license to consult it on an "as is" basis, at your own risk. All other rights are reserved.
All pertinent state, regional, and local safety regulations must be observed when installing and using this
product. For reasons of th documented syst safety and to help ensure compliance wi em data, only the
manufacturer should perform repairs to components.
When devices are used for applications with technical safety requirements, the relevant instructions must
be followed.
Failure to use Schneider Electric software or approved software with our hardware products may result in
injury, harm, or improper operating results.
Failure to observe this information can result in injury or equipment damage.
© 2020 Schneider Electric. All rights reserved.
QGH66984 07/2020 3
Table of Contents
Table of Contents
Table of Contents
Table of ContentsTable of Contents
Safety Information. . . . . . . . . . .
Safety Information. . . . . . . . . . .
Safety Information. . . . . . . . . . .
Safety Information. . . . . . . . . . .Safety Information. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
5
5
55
About the Book
About the Book
About the Book
About the BookAbout the Book . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
.
.
.. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
11
11
1111
Chapter 1
Chapter 1
Chapter 1
Chapter 1Chapter 1 Presentation . . . . . . . . . . . . . . .
Presentation . . . . . . . . . . . . . . .
Presentation . . . . . . . . . . . . . . .
Presentation . . . . . . . . . . . . . . .Presentation . . . . . . . . . . . . . . . . . . . . .
. . . . . .
. . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
15
15
1515
Hardware Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
16
16
1616
Software Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
17
17
1717
Chapter 2
Chapter 2
Chapter 2
Chapter 2Chapter 2 Basics
Basics
Basics
BasicsBasics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
19
19
1919
BACnet Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
20
20
2020
BACnet Device Profiles and BIBBs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
21
21
2121
BACnet Object. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
22
22
2222
BACnet Properties. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
23
23
2323
BACnet Change of Value . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
25
25
2525
Chapter 3
Chapter 3
Chapter 3
Chapter 3Chapter 3 Hardware Setup
Hardware Setup
Hardware Setup
Hardware SetupHardware Setup . . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . .
. . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
27
27
2727
Hardware Presentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
28
28
2828
Firmware Version . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
28
28
2828
Installation of the Module. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
29
29
2929
Electrical Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
30
30
3030
BACnet MS/TP Network Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
32
32
3232
Chapter 4
Chapter 4
Chapter 4
Chapter 4Chapter 4 Software Setup
Software Setup
Software Setup
Software SetupSoftware Setup . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . .
.
.
. . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
33
33
3333
4.1 Basic Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
34
34
3434
Configuring the Communication Parameters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
35
35
3535
[Address]
[Address]
[Address]
[Address][Address] AdrC
AdrC
AdrC
AdrCAdrC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
35
35
3535
[Bit rat
[Bit rat
[Bit rat
[Bit rat[Bit rate]
e]
e]
e]e] bdr
bdr
bdr
bdrbdr. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
35
35
3535
[Frame format]
[Frame format]
[Frame format]
[Frame format][Frame format] For
For
For
ForFor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
36
36
3636
[Fieldbus timeou
[Fieldbus timeou
[Fieldbus timeou
[Fieldbus timeou[Fieldbus timeout]
t]
t]
t]t] tLP
tLP
tLP
tLPtLP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
36
36
3636
[Instance
[Instance
[Instance
[Instance[Instance nb]
nb]
nb]
nb] nb] INXP
INXP
INXP
INXPINXP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
37
37
3737
[Max master address]
[Max master address]
[Max master address]
[Max master address][Max master address] MMn
MMn
MMn
MMnMMn . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
37
37
3737
[Max info frame
[Max info frame
[Max info frame
[Max info frame[Max info frames]
s]
s]
s]s] MiF
MiF
MiF
MiFMiF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
38
38
3838
[Data rate used]
[Data rate used]
[Data rate used]
[Data rate used][Data rate used] bdru
bdru
bdru
bdru bdru . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
38
38
3838
[Rx frame cou
[Rx frame cou
[Rx frame cou
[Rx frame cou[Rx frame count]
nt]
nt]
nt]nt] tFCr
tFCr
tFCr
tFCrtFCr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
39
39
3939
[Incorrect frame co
[Incorrect frame co
[Incorrect frame co
[Incorrect frame co[Incorrect frame count]
unt]
unt]
unt]unt] EFC
EFC
EFC
EFCEFC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
39
39
3939
[Tx frame count]
[Tx frame count]
[Tx frame count]
[Tx frame count][Tx frame count] TFCT
TFCT
TFCT
TFCTTFCT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
40
40
4040
4.2 Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
41
41
4141
Definition of a Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
42
42
4242
Functional Profiles Supported by the Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
43
43
4343
Functional Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
44
44
4444
CIA402 Operating State Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
45
45
4545
Description of Operating States. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
46
46
4646
Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
48
48
4848
Cmd Register CMd
CMd
CMd
CMdCMd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
49
49
4949
Stop Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
50
50
5050
Assigning Control Word Bits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
51
51
5151
[CIA402 State Reg] EtA
EtA
EtA
EtAEtA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
52
52
5252
Starting Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
53
53
5353
Starting Sequence for a Drive Powered by the Power Stage Supply . . . . . . . . . . . . . . . . . . 54
54
54
5454
Starting Sequence for a Drive with Separate Control Stage . . . . . . . . . . . . . . . . . . . . . . . . . 55
55
55
5555
Starting Sequence for a Drive with Mains Contactor Control . . . . . . . . . . . . . . . . . . . . . . . . 57
57
57
5757
4.3 Software Setup with Continuum (BCX1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
59
59
5959
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
60
60
6060
Drive Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
61
61
6161
BCX1 Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
62
62
6262


Product specificaties

Merk: Schneider
Categorie: Niet gecategoriseerd
Model: VW3A3725

Heb je hulp nodig?

Als je hulp nodig hebt met Schneider VW3A3725 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Schneider

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd