Schneider MTN6725-0101 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Schneider MTN6725-0101 (11 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 229 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/11
www.se.com
SpaceLogic KNX
SpaceLogic KNX DALI Gateway Pro
Product Information
This document is based on the installation instructions and gives you further product
information about the SpaceLogic KNX DALI Gateway Pro.
MTN6725-0101
06/2020
2 MTN6725-0101
06/2020
SpaceLogic KNX
Legal information
The Schneider Electric brand and any trademarks of Schneider Electric SE and its
subsidiaries referred to in this guide are the property of Schneider Electric SE or its
subsidiaries. All other brands may be trademarks of their respective owners.
This guide and its content are protected under applicable copyright laws and furnis-
hed for informational use only. No part of this guide may be reproduced or transmit-
ted in any form or by any means (electronic, mechanical, photocopying, recording,
or otherwise), for any purpose, without the prior written permission of Schneider
Electric.
Schneider Electric does not grant any right or license for commercial use of the
guide or its content, except for a non-exclusive and personal license to consult it
on an “as is” basis. Schneider Electric products and equipment should be installed,
operated, serviced, and maintained only by qualied personnel.
As standards, specications, and designs change from time to time, information
contained in this guide may be subject to change without notice.
To the extent permitted by applicable law, no responsibility or liability is assumed by
Schneider Electric and its subsidiaries for any errors or omissions in the informa-
tional content of this material or consequences arising out of or resulting from the
use of the information contained herein.
3
06/2020 MTN6725-0101
SpaceLogic KNX
Warnings
Read these instructions carefully and look at the equipment to become familiar with
the device before trying to install, operate, service, or maintain it. The following
special messages may appear throughout this manual or on the equipment to warn
of potential hazards or to call attention to information that claries or simplies a
procedure.
The addition of either symbol to a “Danger” or “Warning” safety label indicates
that an electrical hazard exists which will result in personal injury if the instruc-
tions are not followed.
This is the safety alert symbol. It is used to alert you to potential personal injury
hazards. Obey all safety messages that accompany this symbol to avoid possible
injury or death.
DANGER
DANGER indicates a hazardous situation which, if not avoided, will result
in death or serious injury.
WARNING
WARNING indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION
CAUTION indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury
NOTICE
NOTICE is used to address practices not related to physical injury.
Additonal notes
The specied information must be followed, otherwise a program or data error
may occur
Your will nd additional information here to make your work easier.


Product specificaties

Merk: Schneider
Categorie: Niet gecategoriseerd
Model: MTN6725-0101

Heb je hulp nodig?

Als je hulp nodig hebt met Schneider MTN6725-0101 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Schneider

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd