Scanstrut SC-USB-01 Handleiding

Scanstrut Batterij-oplader SC-USB-01

Lees hieronder de 📖 handleiding in het Nederlandse voor Scanstrut SC-USB-01 (2 pagina's) in de categorie Batterij-oplader. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/2
SC-USB-01 01-12-2022 (Issue 2) Installation Instructions
For further installation
and warranty information
please visit:
www.scanstrut.com
USA
+1 860 308 1416
usasales@scanstrut.com
UK & International
+44 (0)1392531280
sales@scanstrut.com
Part List
Shell Gasket Lock Ring No.6 x 16X1 X1 X1 X1
Tools Required
ø2.5mm (3/32")
Drill Bit
Pozi Screwdriver
ø29mm (1 1/8")
Hole Saw
Silicone
1
2
4
3
Ø29mm
3mm Min
25mm Max
Pilot Hole Size
Material No. 6 Screw
Soft Material e.g Plywood 2.5mm (3/32")
Hard Material e.g Fiberglass 3mm (1/8")
ø29mm (1/18")
- Stick Gasket down
- Tighten lock ring onto product until securely  xed
- Screw product into position.
Connect to 12/24V supply, ensuring a waterproof connection. Fuse
and select cable diameter according to input voltage and current
for your speci c installation.
Use the gasket as a template to mark the hole centres.
Drill mounting holes (see tools required).
SC-USB-01 01-12-2022 (Issue 2) Installation Instructions
For further installation
and warranty information
please visit:
www.scanstrut.com
USA
+1 860 308 1416
usasales@scanstrut.com
UK & International
+44 (0)1392531280
sales@scanstrut.com
READ IMPORTANT SAFETY INFORMATION BEFORE
INSTALLING.
WARNING:
This product is to be connected to a 12V DC or
24V DC battery power source only. The power
supply must be switched off before installation.
An appropriate fuse or circuit breaker must be
used between the battery / power source and this
product. Check for correct polarity of all wiring
before switching the power on.
This product may contain high voltages. Do not
tamper with the product.
This product is NOT approved for use in
hazardous/ammable atmospheres.
Do NOT install in a hazardous/ammable
atmosphere e.g. engine room.
Before drilling any holes, ensure the area behind
the mounting location is clear of wires, fuel and all
other hazardous objects.
Ensure any holes cut will not signicantly weaken
the structure of the mounting surface.
If the product needs to be mounted outside,
it must be mounted in a location safely above
the waterline, where it is not at risk of being
submerged.
CAUTION:
This product does not contain any user
serviceable parts. DO NOT attempt to repair or
modify the product in any way.
When used in high ambient temperature or
in direct sunlight, the product may turn off
temporarily, this is a safety feature of the
electronics.
The IP protection rating is only valid if the
installation is carried out correctly according to
the instructions and on a perfectly at, smooth
and non-porous surface.
When choosing a mounting location, avoid areas
exposed to heat radiation devices and areas with
poor ventilation
WIRING:
Professional electrician installation recommended,
see Technical Information for power requirements.
To achieve max power output, the specied voltage
must be at the charger. Battery performance and
voltage drop needs to be considered for installation.
ENVIRONMENTAL PROTECTION:
Waste electrical products should not be disposed
of with household waste. Please recycle where
facilities exist. Check with your Local Authority or
retailer for recycling advice.
IMPORTANT:
Scanstrut Ltd & Inc. accepts no responsibility for any
injuries or other damages arising from the use of
their products in any circumstances.
WARRANTY:
A 2 year, non-transferable warranty covers this
Scanstrut product only and not any devices that
are charged by it. No warranty is given for users’
devices and users expose their devices to hazards,
known or unknown, at their own risk.
Cutting Template
1:1 Scale
Print document 1:1
Scale for correct cutting
template size.
Input voltage
12/24V System 10-30V DC
Input current Max 1.5A
Output Type A 5V 1A⎓
Output Type A 5V 2.1A⎓
Total Output Current 3.1A
Standby draw 0.01W
Waterproof rating IPX4
Certication CE, ROHS
Technical information
29 mm
(1 1/8"
)
50 mm
2"

Product specificaties

Merk: Scanstrut
Categorie: Batterij-oplader
Model: SC-USB-01

Heb je hulp nodig?

Als je hulp nodig hebt met Scanstrut SC-USB-01 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Batterij-oplader Scanstrut

Scanstrut

Scanstrut SC-CW-05E Handleiding

28 Januari 2025
Scanstrut

Scanstrut SC-CW-01E Handleiding

28 Januari 2025
Scanstrut

Scanstrut SC-CW-06E Handleiding

28 Januari 2025
Scanstrut

Scanstrut SC-CW-04E Handleiding

27 Januari 2025
Scanstrut

Scanstrut SC-USB-01 Handleiding

27 Januari 2025

Handleiding Batterij-oplader

Nieuwste handleidingen voor Batterij-oplader

Rocstor

Rocstor Y0PS90-B Handleiding

25 Februari 2025
StarTech.com

StarTech.com 424DNA-USB-C-CHARGER Handleiding

20 Februari 2025
StarTech.com

StarTech.com 424DEU-USB-C-CHARGER Handleiding

20 Februari 2025
StarTech.com

StarTech.com 424DAU-USB-C-CHARGER Handleiding

20 Februari 2025
Cellular Line

Cellular Line MAG HUB Handleiding

12 Februari 2025
Rocstor

Rocstor Y10A245-W1 Handleiding

10 Februari 2025
Rocstor

Rocstor Y10A246-W1 Handleiding

10 Februari 2025
Savio

Savio LA-04 Handleiding

7 Februari 2025
Savio

Savio LA-09 Handleiding

7 Februari 2025
Savio

Savio LA-08 Handleiding

7 Februari 2025