Satel APD-200 Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Satel APD-200 (10 pagina's) in de categorie Bewegingsdetector. Deze handleiding was nuttig voor 58 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/10
APD-200
Wireless passive infrared detector
Firmware version -200_ 03/ 1.00 apd en 21
SATEL sp. z o.o. ul. Budowlanych 66 - POLAND • • 80 298 Gdańsk •
tel. +48 58 320 94 00
www.satel.eu
IMPORTANT
The device should be installed by qualied personnel.
Prior to installation, please read carefully this manual.
Changes, modications or repairs not authorized by the manufacturer shall void your rights
under the warranty.
The rating plate of the device is located on the enclosure base.
SATEL aims to continually improve the quality of its products, which may result in changes in
their technical specications and software. Current information about the changes being
introduced is available on our website.
Please visit us at:
https://support.satel.eu
Hereby, SATEL sp. z o.o. declares that the radio equipment type APD-200 is in
compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity
is available at the following internet address: www.satel.eu/ce
In the EU, th radio equipment is only permitted to operate in the 868 MHz frequency is
band.
The following symbols may be used in this manual:
- note,
- caution.
The APD-200 detector can detect motion in a protected area. It is designed for operation
within the ABAX 2 / ABAX two-way wireless system. This manual applies to the detector with
rmware version 1.00 (or newer), which is supported by:
ď‚· ABAX 2:
– ACU-220 / ACU-280 controller,
– ARU-200 repeater.
ď‚· ABAX:
– ACU-120 / ACU-270 controller (rmware version 5.04 or newer),
– ARU-100 repeater (rmware version 2.02 or newer),
– INTEGRA 128-WRL control panel (rmware version 1.19 or newer and rmware
version of processor used to operate ABAX system 3.10 or newer).
1 Features
ď‚· Dual element pyrosensor.
ď‚· Digital motion detection algorithm.
ď‚· Digital temperature compensation.
ď‚· Option to enable / disable the creep zone protection.
ď‚· Ability to replace the lens with a curtain or long-range one.
ď‚· Encrypted two-way radio communication in the 868 MHz / MHz frequency band (AES 915
standard for the ABAX 2 system).
 Transmission channel diversity 4 channels for automatic selection of the one that will –
enable transmission without interference with other signals in the 868 MHz / M 915 Hz
frequency band (ABAX 2 system only).
 Remote update of detector rmware (ABAX 2 system only).
 Remote conguration.
 Built-in temperature sensor (temperature measurement range from - 10°C to +55°C).
ď‚· LED indicators.
ď‚· Supervision of motion detection system.
 2 system only). “ECO” option for longer battery life (ABAX
ď‚· Battery status control.
ď‚· Tamper protection against enclosure opening and removal from mounting surface.
ď‚· Adjustable mounting bracket included.
2 Specifications
Operating frequency band ............................... 868.0 MHz MHz / 915 MHz 928 MHz ÷868.6 –
Radio communication range (in open area)
ABAX 2
ACU- 220.............................................................................................. up to 2000 m
ACU- 280.............................................................................................. up to 1600 m
ABAX .............................................................................................................. up to 500 m
Battery ................................................................................................................... CR123A 3 V
Battery life expectancy .......................................................................................... up to 2 years
Temperature measurement range ....................................................................... - 10°C...+55°C


Product specificaties

Merk: Satel
Categorie: Bewegingsdetector
Model: APD-200
Kleur van het product: Wit
Gewicht: 132 g
Breedte: 62 mm
Diepte: 137 mm
Hoogte: 42 mm
Connectiviteitstechnologie: Draadloos
Type stroombron: Batterij/Accu
Accu/Batterij voltage: 3 V
Levensduur batterij/accu: 2 jaar
Certificering: EN50131-1, EN50130-4, EN50130-5
Type beeldsensor: Passieve infraroodsensor (PIR)/Microgolfsensor
Aantal per verpakking: 1 stuk(s)
Frequentie: 868 - 868.6 MHz
Bedrijfstemperatuur (T-T): -10 - 55 °C
Relatieve vochtigheid in bedrijf (V-V): 0 - 93 procent
Type batterij: CR123A
Detectie hoek: 90 °
Installatie hoogte (max): 2.4 m

Heb je hulp nodig?

Als je hulp nodig hebt met Satel APD-200 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Bewegingsdetector Satel

Handleiding Bewegingsdetector

Nieuwste handleidingen voor Bewegingsdetector

Lucide

Lucide Eclips Handleiding

20 November 2024
Megatron

Megatron MT68030 Handleiding

19 November 2024
Megatron

Megatron MT68032 Handleiding

19 November 2024
D-Link

D-Link DCH-S150 Handleiding

16 November 2024
Hager

Hager TXD503 Handleiding

16 November 2024
Maxsa

Maxsa 40234 Handleiding

11 September 2024
Maxsa

Maxsa 43218 Handleiding

11 September 2024
ORNO

ORNO OR-CR-233 Handleiding

9 September 2024