Ryobi One+ PSBDG01 Handleiding

Ryobi Niet gecategoriseerd One+ PSBDG01

Lees hieronder de 📖 handleiding in het Nederlandse voor Ryobi One+ PSBDG01 (32 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/32
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
HP BRUSHLESS
1/4 in. RIGHT ANGLE DIE GRINDER
MEULEUSE À MATRICE EN ANGLE DROIT
DE 6,35 mm (1/4 po) SANS BALAI HP
ESMERILADORA DE ÁNGULO RECTO DE
6,35 mm (1/4 pulg.) SIN ESCOBILLAS HP
PSBDG01
General Power Tool
Safety Warnings 2-3 ..............................
Die Grinder Safety Warnings 4-6 ...........
Symbols 7 ..............................................
Features 8 ..............................................
 Assembly ............................................8
Operation .......................................8-10
Maintenance .....................................10
Illustrations .......................................11
Parts Ordering
and Service Back page .........................
Règles de sécurité générales
relatives aux outils électriques 2-3 ........
Avertissements de sécurité
liés à la meuleuse à matrice 4-6 ............
Symboles 7 ............................................
Caractéristiques 8 .................................
 Assemblage ........................................8
Utilisation ......................................8-10
Entretien ...........................................10
Illustrations .......................................11
Commande de pièces
et dépannage Page arrière ....................
Advertencias de seguridad
para herramientas eléctrica 2-3 ...........
Advertencias de seguridad
de la esmeriladora 4-6 .........................
Símbolos 7 ............................................
Características 8 ...................................
 Armado ..............................................8
Funcionamiento ........................... 8-10
Mantenimiento .................................10
Illustraciones ....................................11
 Pedidos de piezas
y servicio Pág. posterior .......................
WARNING:
To reduce the risk of injury, the user
must read and understand the opera-
tor’s manual before using this product.
AVERTISSEMENT :
Pour réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien com-
prendre le manuel d’utilisation avant
d’utiliser ce produit.
ADVERTENCIA:
Para reducir el riesgo de lesiones, el
usuario debe leer y comprender el
manual del operador antes de usar este
producto.
TABLE OF CONTENTS TABLE DES MATIÈRES ÍNDICE DE CONTENIDO
SAVE THIS MANUAL FOR
FUTURE REFERENCE
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
INCLUDES: Die Grinder, Wrench, and
Operator’s Manual
INCLUT
: Meuleuse à matrice, cle,
manuel
de l’opérateur
INCLUYE: Esmeriladora, llave, manual del
operador
2 - English
GENERAL POWER TOOL SAFETY WARNINGS
WARNING:
Read all safety warnings, instructions, illustrations
and specifications provided with this power tool.
Failure to follow all instructions listed below may result
in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term “power tool” in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
WORK AREA SAFETY
Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases
or dust. Power tools create sparks which may ignite the
dust or fumes.
Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
ELECTRICAL SAFETY
Power tool plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body
is earthed or grounded.
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric shock.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
If operating a power tool in a damp location is
unavoidable, use a ground fault circuit interrupter
(GFCI) protected supply. Use of a GFCI reduces the risk
of electric shock.
Use this product only with batteries and chargers listed
in tool/appliance/battery pack/charger correlation
supplement 987000-432.
PERSONAL SAFETY
Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a
power tool while you are tired or under the influence
of drugs, alcohol or medication. A moment of inattention
while operating power tools may result in serious personal
injury.
Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal
injuries.
Prevent unintentional starting. Ensure the switch is in
the off-position before connecting to power source
and/or battery pack, picking up or carrying the tool.
Carrying power tools with your finger on the switch or
energizing power tools that have the switch on invites
accidents.
Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to
a rotating part of the power tool may result in personal
injury.
Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power tool
in unexpected situations.
Dress properly. Do not wear loose clothing or jewelry.
Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewelry or long hair can be caught
in moving parts.
If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection
can reduce dust-related hazards.
Do not let familiarity gained from frequent use of tools
allow you to become complacent and ignore tool
safety principles. A careless action can cause severe
injury within a fraction of a second.
Do not wear loose clothing or jewelry. Contain long hair.
Loose clothes, jewelry, or long hair can be drawn into air
vents.
Do not use on a ladder or unstable support. Stable
footing on a solid surface enables better control of the
power tool in unexpected situations.
3 - English
GENERAL POWER TOOL SAFETY WARNINGS
POWER TOOL USE AND CARE
Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/
or remove the battery pack, if detachable, from the
power tool before making any adjustments, changing
accessories, or storing power tools. Such preventive
safety measures reduce the risk of starting the power tool
accidentally.
Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
Maintain power tools and accessories. Check for
misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the
power tool’s operation. If damaged, have the power
tool repaired before use. Many accidents are caused
by poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to
bind and are easier to control.
Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
Keep handles and grasping surfaces dry, clean and
free from oil and grease. Slippery handles and grasping
surfaces do not allow for safe handling and control of the
tool in unexpected situations.
BATTERY TOOL USE AND CARE
Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
Use power tools only with specifically designated
battery packs. Use of any other battery packs may create
a risk of injury and fire.
When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys, nails,
screws or other small metal objects, that can make a
connection from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from the
battery may cause irritation or burns.
Do not use a battery pack or tool that is damaged or
modified. Damaged or modified batteries may exhibit
unpredictable behavior resulting in fire, explosion or risk
of injury.
Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or temperature
above 265°F may cause explosion.
Follow all charging instructions and do not charge the
battery pack or tool outside the temperature range
specified in the instructions. Charging improperly or at
temperatures outside the specified range may damage
the battery and increase the risk of fire.
SERVICE
Have your power tool serviced by a qualified repair
person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.

Product specificaties

Merk: Ryobi
Categorie: Niet gecategoriseerd
Model: One+ PSBDG01

Heb je hulp nodig?

Als je hulp nodig hebt met Ryobi One+ PSBDG01 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Ryobi

Ryobi

Ryobi One+ RPM18X Handleiding

20 November 2024
Ryobi

Ryobi ELL1002 Handleiding

3 November 2024
Ryobi

Ryobi One+ P505 Handleiding

23 Augustus 2024
Ryobi

Ryobi One+ PBLRS01 Handleiding

23 Augustus 2024
Ryobi

Ryobi One+ PBLJS01 Handleiding

23 Augustus 2024
Ryobi

Ryobi RB61G Handleiding

23 Augustus 2024
Ryobi

Ryobi One+ PSBDG01 Handleiding

23 Augustus 2024
Ryobi

Ryobi One+ RB102G Handleiding

23 Augustus 2024
Ryobi

Ryobi One+ PSBCK102 Handleiding

22 Augustus 2024
Ryobi

Ryobi One+ PCL601 Handleiding

22 Augustus 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Middle Atlantic

Middle Atlantic FD-12 Handleiding

20 November 2024
Middle Atlantic

Middle Atlantic MV-PVT26 Handleiding

20 November 2024
Middle Atlantic

Middle Atlantic SRS4-14 Handleiding

20 November 2024
Middle Atlantic

Middle Atlantic VFD-35 Handleiding

20 November 2024
Middle Atlantic

Middle Atlantic SRCC Handleiding

20 November 2024
Middle Atlantic

Middle Atlantic FD-18 Handleiding

20 November 2024
Middle Atlantic

Middle Atlantic ERK-ST Handleiding

20 November 2024
Middle Atlantic

Middle Atlantic CAP5 Handleiding

20 November 2024
Middle Atlantic

Middle Atlantic CBS-ERK-20R Handleiding

20 November 2024
Middle Atlantic

Middle Atlantic ICOMP-COOL-3 Handleiding

20 November 2024