Russell Hobbs Easy Fill 17877-56 Handleiding

Russell Hobbs Strijkijzer Easy Fill 17877-56

Lees hieronder de 📖 handleiding in het Nederlandse voor Russell Hobbs Easy Fill 17877-56 (92 pagina's) in de categorie Strijkijzer. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/92
instructions 2
Bedienungsanleitung 6
mode d’emploi 10
instructies 14
istruzioni per l’uso 18
instrucciones 22
instruções 26
brugsanvisning 30
bruksanvisning 34
instruksjoner 38
ytohjeet 42
инструкции (Русский) 46
pokyny (Čeština) 50
pokyny (Slovenčina) 54
instrukcja 58
upute 62
navodila 66
οδηγίες 70
utasítások 74
talimatlar 78
instrucţiuni 82
инструкции ългарски) 86
2
Read the instructions, keep them safe, pass them on if you pass the appliance on.
Remove all packaging before use.
A IMPORTANT SAFEGUARDS
Follow basic safety precautions, including:
1 This appliance must only be used by or under the supervision of a responsible adult. Use and
store the appliance out of reach of children.
2 Don’t put the appliance in liquid, don’t use it in a bathroom, near water, or outdoors.
3 Route the cable so it doesn’t overhang, and can’t be tripped over or caught.
4 Don’t iron clothing while it’s being worn – you’ll injure the wearer.
5 Don’t touch the soleplate, and keep away from the steam it emits.
6 Don’t use the iron in the vicinity of children.
7 Use the iron, or set it on its heel, on a stable, level, heat-resistant surface, preferably an
ironing board.
8 Don’t leave the iron unattended while plugged in, or while it’s standing on the ironing board.
9 Unplug the iron before filling, before cleaning, and after use.
10 Sit the iron upright when you’re not ironing.
11 Don’t use accessories or attachments other than those we supply.
12 Don’t use the appliance for any purpose other than those described in these instructions.
13 Don’t scratch the soleplate – avoid buttons, zips, etc.
14 The appliance has a protective thermal fuse, which will blow if it overheats. If this happens,
the appliance will stop working, and must be returned for repair.
15 Don’t operate the appliance if its dropped or damaged, or if it malfunctions or leaks.
16 If the cable is damaged, it must be replaced by the manufacturer, its service agent, or
someone similarly qualified, in order to avoid hazard.
household use only
U BEFORE USING FOR THE FIRST TIME
1 Remove any labels, stickers or packaging from the iron and soleplate.
2 Don’t worry if the iron smokes a bit at first, it’ll stop as the element cures.
3 Iron an old piece of cotton fabric, to clean the soleplate.
4 Press the and buttons 3 or 4 times, to check them.# *
3
C PREPARATION
5 Check for textile care symbols (i j k l).
6 Iron fabrics needing low temperatures first, then those that need medium temperatures j
k l, and finish with those needing high temperatures .
X FILLING
7 The iron may be used with tap-water, but if you live in a hard-water area, you should use
distilled water (not chemically descaled water).
8 If you buy distilled water, check that it is marketed as suitable for irons.
9 Don’t add anything to the water – you’ll damage the iron.
10 Unplug the appliance.
11 Set the temperature control to . Set the steam control to .S
12 Hold the iron with the heel uppermost.
13 Press the button, and keep it pressed in. This opens the valveV
14 Pour water into the heel till it stops disappearing into the reservoir, and starts to back up.
15 Release the button. This closes the valve.V
16 Tip excess water out of the heel.
17 Wipe up any spillage.
C SWITCH ON
18 Set the temperature control to .
19 Sit the iron on its heel.
20 Put the plug into the power socket.
21 Turn the temperature control to bring the setting you want (see the guide below) next to the
5 mark. The light will glow.
22 When the iron reaches the set temperature, the light will go off.
23 It will then cycle on and off as the thermostat operates to maintain the temperature.
temperature setting guide
label marking temperature setting
j cool – nylon, acrylics, polyester
k warm – wool, polyester mixtures
l hot – cotton, linen •••/max
i do not iron
, If the instructions on the fabric label differ from this guide, follow the instructions on the
label.
C REDUCING TEMPERATURE
24 Reducing temperature takes longer, as the appliance has to lose heat.
25 Organise your ironing so you don’t need to reduce the temperature (“preparation” point 6).
h STEAM IRONING
26 If you intend to use steam, the temperature setting must be or higher.S
27 If you don’t, you’ll get water on your clothes, not steam.
28 Set the steam control to the setting you want ( = no steam, = low, = high).SS #
29 Wait till the light goes off, then start ironing.
instructions
diagrams
1 temperature control
5 mark
S steam available
2 light
3 steam control
# high steam
S no steam
4 spray nozzle
5 soleplate
6 steam vents
7 reservoir
8 heel
9 water inlet


Product specificaties

Merk: Russell Hobbs
Categorie: Strijkijzer
Model: Easy Fill 17877-56

Heb je hulp nodig?

Als je hulp nodig hebt met Russell Hobbs Easy Fill 17877-56 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Strijkijzer Russell Hobbs

Handleiding Strijkijzer

Nieuwste handleidingen voor Strijkijzer