Rinnai Ultima II REH-311FT Handleiding

Rinnai Heater Ultima II REH-311FT

Lees hieronder de 📖 handleiding in het Nederlandse voor Rinnai Ultima II REH-311FT (27 pagina's) in de categorie Heater. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/27
This appliance shall be installed in accordance with:
• Manufacturer’s Installation Instructions
• Current AS/NZS 3000 and AS/NZS 5601
• Local Regulations and Municipal Building Codes
This appliance must be installed, serviced and removed by an authorised person.
All Rinnai gasproducts
are A.G.A. certified.
ULTIMA II
Flued Space Heater
Operation / Installation Manual
MODEL REH-311FT(B) - Inbuilt
MODEL REH-311FT(C) - Console
Rinnai Australia i Ultima II Operation Manual
INSTALLATION REQUIREMENTS
This heater must be installed by an authorised person. The installation must conform to local regulations.
The installation must also comply with the instructions supplied by Rinnai.
Service and removal must be carried out by an authorised person.
The Rinnai REH311FT has been certified by the Australian Gas Association.
The AGA Certification Number is shown on the appliance dataplate.
No parts or functions should be modified or permanently removed from the heater.
Please keep these instructions in a safe place for future reference.
CERTIFICATION
Rinnai Australia 1 Ultima II Operation Manual
ABOUT YOUR ULTIMA II
DESIGN LAYOUT
Control panel
STANDBY/ON button
Burner filter
Air inlet louvre
Warm air discharge louvre
Thermistor grill cover
Dress guard
NAVIGATING THE CONTROL PANEL
STANDBY / ON button - used to operate and
stop the heater.
ON / Combustion indicator - when GREEN
appliance is in standby, when RED the burner
is operating and when flashing RED there is a
fault.
UP / DOWN button - used to adjust the SET
temperature, clock and timers and operate the
lock function.
TEMP display -
CURR - indicates the current room
temperature.
SET - indicates the desired room
temperature programmed by the user.
Clock display - displays current time.
MODE display - indicates which mode the
heater is operating in.
SET button - used to programme the heater
operation.
DAY display - displays the current day.
AM/PM indicator - indicates AM or PM of
clock or timer settings.
TIMER display - when the word ‘TIMER’ is
shown the display panel will be showing
current timer settings.
TIMER button - operates timer functions.
PROGRAM display - when the word
‘PROGRAM’ is shown the heater is in
programming mode.
WEEKDAY/WEEKEND display - Indicates
whether the weekday or weekend timers are
being programmed.
AM/PM display - indicates whether AM and/
or PM timer settings are being programmed.
OVERRIDE button - operates the manual
override function.
FILTER display - when shown the filter(s)
require cleaning.
LOCK display - when shown the lock function
is activated.
6
214
5
3
7
1
2
3
4
5
6
7
s u
i0:30
am
t i m e r
G A S E C O N
AM PM
A U T O O F F
11
10
20 18
16
25
1419
23
15
17
2
9
8
121324
2122
2
8
9
10
11
12
13
14
15
16


Product specificaties

Merk: Rinnai
Categorie: Heater
Model: Ultima II REH-311FT

Heb je hulp nodig?

Als je hulp nodig hebt met Rinnai Ultima II REH-311FT stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Heater Rinnai

Handleiding Heater

Nieuwste handleidingen voor Heater