Rikon 50-320 Handleiding

Rikon Niet gecategoriseerd 50-320

Lees hieronder de 📖 handleiding in het Nederlandse voor Rikon 50-320 (16 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/16
www.rikontools.com
50-320M1
Operator’s Manual
Oscillating Spindle Sander
50-320
Record the serial number and date of purchase in your manual for future reference.
Serial Number: _________________________ Date of purchase: _________________________
For technical support, email techsupport@rikontools.com - For parts questions, email parts@rikontools.com
The serial number can be found on the specication label on the rear of your machine.
Specications 2
Safety Warnings 3 - 6
Electrical Requirements 5 & 14
Sander Safety Rules 6
Contents of Package 7
Getting to Know Your Machine 8
Assembly 8 - 9
Operation 10
Maintenance 11
Troubleshooting 11
Parts Diagrams & Parts Lists 12 - 13
Wiring Diagram 14
Accessories 14
Notes 14
Warranty 15
2
TABLE OF CONTENTS
SPECIFICATIONS - 50-320
NOTE: The specications, photographs, drawings and information in this manual represent the current model when the
manual was prepared. Changes and improvements may be made at any time, with no obligation on the part of Rikon
Power Tools, Inc. to modify previously delivered units. Reasonable care has been taken to ensure that the information in
this manual is correct, to provide you with the guidelines for the proper safety, assembly and operation of this machine.
Motor 1/2 HP, 4A, 120V, 60 Hz, 10,000 RPM
Spindle Speed (no load) 2,000 RPM
Table Size (LxW) 12 x 12-5/8 (305mm X 320mm)” ”
Spindle Length x Diameter 4-1/2 (115mm) x 1/2 (12.66mm)” ”
Sanding Drum Diameters Included (6) 1/2 , 3/4 , 1 , 1-1/2 , 2 , 3” ” ” ” ” ”
Maximum Spindle Diameter Allowed 3”
Spindle Oscillation 5/8 (16mm)”
Maximum Sanding Depth 3-13/16 (97mm)”
Oscillations Per Minute 58
Dust Outlet 38mm (1-5/16 I.D. or 1-1/2 O.D.)” ”
Height (overall) 17-1/2 (445mm)”
Height (base to table) 12-5/8 (320mm)”
Width 13-3/8 (340mm)”
Depth 15 (380mm)”
Base Size (LxW) 13-3/8 x 14 (340mm x 356mm)” ”
Net Weight 20 lbs. (9.07 kgs.)
Shipping Weight 23 lbs. (10.43 kgs.)
Shipping Carton (LxWxH) 18-1/2 x 16 x 20 (470mm x 405mm x 510mm)”””
3
SAFETY SYMBOLS
IMPORTANT! Safety is the single most important consideration in the operation of this equipment. The following
instructions must be followed at all times. Failure to follow all instructions listed below may result in electric shock,
re, and/or serious personal injury.
There are certain applications for which this tool was designed. We strongly recommend that this tool not be modied
and/or used for any other application other than that for which it was designed. If you have any questions about its
application, do not use the tool until you have contacted us and we have advised you.
SAFETY INSTRUCTIONS
GENERAL SAFETY
KNOW YOUR POWER TOOL. Read the owner’s manual
carefully. Learn the tool’s applications, work capabilities,
and its specic potential hazards.
BEFORE USING YOUR MACHINE
To avoid serious injury and damage to the tool, read and
follow all of the Safety and Operating Instructions before
operating the machine.
1. Some dust created by using power tools
contains chemicals known to the State of California to
cause cancer, birth defects, or other reproductive harm.
Some examples of these chemicals are:
• Lead from lead-based paints.
• Crystalline silica from bricks, cement, and other
• masonry products.
• Arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending on how
often you do this type of work. To reduce your exposure to
these chemicals: work in a well ventilated area and work
with approved safety equipment, such as those dust masks
that are specially designed to lter out microscopic
particles.
2. the entire Owner’s Manual. how to use READ LEARN
the tool for its intended applications.
3. If the tool is supplied with a 3 GROUND ALL TOOLS.
prong plug, it must be plugged into a 3-contact electrical
receptacle. The 3rd prong is used to ground the tool and
provide protection against accidental electric shock. DO
NOT remove the 3rd prong. See Grounding Instructions
on the following pages.
4. AVOID A DANGEROUS WORKING ENVIRONMENT.
DO NOT use electrical tools in a damp environment or
expose them to rain.
5. use electrical tools in the presence of DO NOT
ammable liquids or gases.
6. ALWAYS keep the work area clean, well lit, and
organized. work in an environment with oor DO NOT
surfaces that are slippery from debris, grease, and wax.
7. KEEP VISITORS AND CHILDREN AWAY. DO NOT
permit people to be in the immediate work area,
especially when the electrical tool is operating.
8. to perform an operation DO NOT FORCE THE TOOL
for which it was not designed. It will do a safer and
higher quality job by only performing operations for
which the tool was intended.
9. wear loose WEAR PROPER CLOTHING. DO NOT
clothing, gloves, neckties, or jewelry. These items can
get caught in the machine during operations and pull the
operator into the moving parts. The user must wear a
protective cover on their hair, if the hair is long, to
prevent it from contacting any moving parts.
10. CHILDPROOF THE WORKSHOP AREA by
removing switch keys, unplugging tools from the
electrical receptacles, and using padlocks.
11. ALWAYS UNPLUG THE TOOL FROM THE
ELECTRICAL RECEPTACLE when making adjust-
ments, changing parts or performing any maintenance.
SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, or CAUTION. This symbol may be used
in conjunction with other symbols or pictographs.
Indicates an imminently hazardous situation, which, if not avoided, could result in death or
serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious
injury.
Indicates a potentially hazardous situation, which, if not avoided, could result in minor or
moderate injury.
NOTICE: Shown without Safety Alert Symbol indicates a situation that may result in property damage.

Product specificaties

Merk: Rikon
Categorie: Niet gecategoriseerd
Model: 50-320

Heb je hulp nodig?

Als je hulp nodig hebt met Rikon 50-320 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Rikon

Rikon

Rikon 50-320 Handleiding

2 Oktober 2024
Rikon

Rikon 50-310 Handleiding

2 Oktober 2024
Rikon

Rikon 50-1305 Handleiding

5 Augustus 2024
Rikon

Rikon 70-150VSR Handleiding

2 April 2024
Rikon

Rikon 70-1516VSR Handleiding

2 April 2024
Rikon

Rikon 70-3040 Handleiding

5 Maart 2024
Rikon

Rikon 70-1420VSR Handleiding

4 Maart 2024
Rikon

Rikon 60-2500 Handleiding

4 Maart 2024
Rikon

Rikon 70-1218VS Handleiding

4 Maart 2024
Rikon

Rikon 60-1750 Handleiding

4 Maart 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

AeroCool

AeroCool CS-106 Handleiding

2 Oktober 2024
Kugoo

Kugoo KuKirin G2 Handleiding

2 Oktober 2024
IKEA

IKEA ENRUM 105.783.69 Handleiding

2 Oktober 2024
IKEA

IKEA ENRUM 705.783.71 Handleiding

2 Oktober 2024
Garmin

Garmin Edge Power Mount Handleiding

2 Oktober 2024
Enermax

Enermax ESC001 Handleiding

2 Oktober 2024
Panduit

Panduit FlexFusion XG-ADS8W Handleiding

2 Oktober 2024
Outwell

Outwell Cantal Fire Pit 651213 Handleiding

2 Oktober 2024
Best

Best MD8T Handleiding

2 Oktober 2024
Best

Best MD8TU Handleiding

2 Oktober 2024