Rikon 10-600VS Handleiding

Rikon Zaagmachine 10-600VS

Lees hieronder de 📖 handleiding in het Nederlandse voor Rikon 10-600VS (16 pagina's) in de categorie Zaagmachine. Deze handleiding was nuttig voor 2 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/16
10-600VS
www.rikontools.com
10-600VSM3
16 VS Scroll Saw”
Operator’s Manual
Record the serial number and date of purchase in your manual for future reference.
Serial Number: _________________________ Date of purchase: _________________________
For technical support or parts questions, email techsupport@rikontools.com or call toll free at (877) 884-5167
The serial number can be found on the specication label on the rear of your machine.
2
TABLE OF CONTENTS
SPECIFICATIONS
NOTE: The specications, photographs, drawings and information in this manual represent the current model
when the manual was prepared. Changes and improvements may be made at any time, with no obligation on
the part of Rikon Power Tools, Inc. to modify previously delivered units. Reasonable care has been taken to
ensure that the information in this manual is correct, to provide you with the guidelines for the proper safety,
assembly and operation of this machine.
Motor Amps, Volts, Hertz ........................................... 1.2 A (1/8HP), 120 V, 60 Hz
Electronic Variable Speed (SPM) ........................................................ 550 - 1,650
Blade Length ...................................................................................................... 5”
Cutting Height Maximum .....................................................................................2”
Stroke ...........................................................................................................19/32”
Throat Depth .............................................................................................. 15-3/4”
Table Size (WxD) .....................................................................10-1/16” x 16-5/16”
Table Tilting ......................................................................................... 0° - 45° Left
Dust Port Diameter ....................................................................................... 1-3/8”
Maximum Sound Level (idle) ....................................................................... <76dB
Rotary Flex Shaft Speed (RPM) ..................................................... 3,300 - 10,000
Overall Size (HxWxD)............................................. 14-15/16" x 12-9/16" x 29-3/4"
Base Size (approx.) ............................................................................. 9” x 15-1/2”
Net Weight ................................................................................................ 26.4 lbs
Specications.....................................................................................................................2
Safety Instructions ........................................................................................................3 - 6
Getting To Know Your Machine ..............................................................................................7
Contents of Package ..................................................................................................... 7 - 8
Assembly .................................................................................................................... 8 - 9
Operation .................................................................................................................. 10 - 12
Maintenance ................................................................................................................... 12
Electricals & Wiring Diagram ....................................................................................... 5 & 13
Troubleshooting ......................................................................................................... 13
Parts Diagram ......................................................................................................... 14
Parts List ........................................................................................................................ 15
Warranty ......................................................................................................................... 16
SAVE THESE INSTRUCTIONS.
Refer to them often.
3
SAFETY SYMBOLS
IMPORTANT! Safety is the single most important consideration in the operation of this equipment. The following
instructions must be followed at all times. Failure to follow all instructions listed below may result in electric shock,
re, and/or serious personal injury.
There are certain applications for which this tool was designed. We strongly recommend that this tool not be modied
and/or used for any other application other than that for which it was designed. If you have any questions about its
application, do not use the tool until you have contacted us and we have advised you.
SAFETY INSTRUCTIONS
GENERAL SAFETY
KNOW YOUR POWER TOOL. Read the owner’s manual
carefully. Learn the tool’s applications, work capabilities,
and its specic potential hazards.
BEFORE USING YOUR MACHINE
To avoid serious injury and damage to the tool, read and
follow all of the Safety and Operating Instructions before
operating the machine.
1. Some dust created by using power tools contains
chemicals known to the State of California to cause cancer,
birth defects, or other reproductive harm.
Some examples of these chemicals are:
• Lead from lead-based paints.
• Crystalline silica from bricks, cement, and other
• masonry products.
• Arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending on how
often you do this type of work. To reduce your exposure to
these chemicals: work in a well ventilated area and work
with approved safety equipment, such as those dust masks
that are specially designed to lter out microscopic
particles.
2. the entire Owner’s Manual. how to use READ LEARN
the tool for its intended applications.
3. If the tool is supplied with a 3 GROUND ALL TOOLS.
prong plug, it must be plugged into a 3-contact electrical
receptacle. The 3rd prong is used to ground the tool and
provide protection against accidental electric shock. DO
NOT remove the 3rd prong. See Grounding Instructions
on the following pages.
4. AVOID A DANGEROUS WORKING ENVIRONMENT.
DO NOT use electrical tools in a damp environment or
expose them to rain.
5. use electrical tools in the presence of DO NOT
ammable liquids or gasses.
6. ALWAYS keep the work area clean, well lit, and
organized. work in an environment with oor DO NOT
surfaces that are slippery from debris, grease, and wax.
7. KEEP VISITORS AND CHILDREN AWAY. DO NOT
permit people to be in the immediate work area,
especially when the electrical tool is operating.
8. to perform an operation DO NOT FORCE THE TOOL
for which it was not designed. It will do a safer and
higher quality job by only performing operations for
which the tool was intended.
9. wear loose WEAR PROPER CLOTHING. DO NOT
clothing, gloves, neckties, or jewelry. These items can
get caught in the machine during operations and pull the
operator into the moving parts. The user must wear a
protective cover on their hair, if the hair is long, to
prevent it from contacting any moving parts.
10. CHILDPROOF THE WORKSHOP AREA by
removing switch keys, unplugging tools from the
electrical receptacles, and using padlocks.
11. ALWAYS UNPLUG THE TOOL FROM THE
ELECTRICAL RECEPTACLE when making adjust-
ments, changing parts or performing any maintenance.
SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, or CAUTION. This symbol may be used
in conjunction with other symbols or pictographs.
Indicates an imminently hazardous situation, which, if not avoided, could result in death or
serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious
injury.
Indicates a potentially hazardous situation, which, if not avoided, could result in minor or
moderate injury.
NOTICE: Shown without Safety Alert Symbol indicates a situation that may result in property damage.

Product specificaties

Merk: Rikon
Categorie: Zaagmachine
Model: 10-600VS

Heb je hulp nodig?

Als je hulp nodig hebt met Rikon 10-600VS stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Zaagmachine Rikon

Rikon

Rikon 10-305 Handleiding

18 November 2024
Rikon

Rikon 10-347 Handleiding

18 November 2024
Rikon

Rikon 10-3061 Handleiding

18 November 2024
Rikon

Rikon 11-600S Handleiding

18 November 2024
Rikon

Rikon 10-205 Handleiding

18 November 2024
Rikon

Rikon 10-342 Handleiding

18 November 2024
Rikon

Rikon 10-353 Handleiding

18 November 2024
Rikon

Rikon 10-600VS Handleiding

18 November 2024
Rikon

Rikon 10-110 Handleiding

16 Maart 2024
Rikon

Rikon 10-306 Handleiding

16 Maart 2024

Handleiding Zaagmachine

Nieuwste handleidingen voor Zaagmachine

Alpha Tools

Alpha Tools BSL 750 Handleiding

17 November 2024
Alpha Tools

Alpha Tools PS 600 E Handleiding

17 November 2024
Alpha Tools

Alpha Tools MHK 500 Handleiding

17 November 2024
Alpha Tools

Alpha Tools PS 520E Handleiding

17 November 2024
Pro-Cut

Pro-Cut KS-120 Handleiding

17 November 2024
Global

Global KS 2040 Handleiding

17 November 2024
Anova

Anova MG2600 Handleiding

17 November 2024
Anova

Anova M437HXP Handleiding

17 November 2024
Anova

Anova RLT8C Handleiding

17 November 2024
Anova

Anova M455HXP Handleiding

17 November 2024