Rikon 10-3061 Handleiding

Rikon Zaagmachine 10-3061

Lees hieronder de 📖 handleiding in het Nederlandse voor Rikon 10-3061 (32 pagina's) in de categorie Zaagmachine. Deze handleiding was nuttig voor 2 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/32
www.rikontools.com
10-3061M4
10″ Deluxe Bandsaw
Operator’s Manual
Record the serial number and date of purchase in your manual for future reference.
The serial number can be found on the specication label on the rear of your machine.
Serial Number: _________________________ Date of purchase: _________________________
For technical support or parts questions, email techsupport@rikontools.com or call toll free at (877) 884-5167
2
Specications.....................................................................................................................2
Safety Instructions ........................................................................................................3 - 6
Getting To Know Your Machine .........................................................................................7
Contents of Package ............................................................................................................8 - 9
Installation ................................................................................................................9
Assembly .........................................................................................................................10 - 12
Adjustments...............................................................................................................12 - 19
Operation ..................................................................................................................20
Maintenance ....................................................................................................................20
Wiring Diagram ................................................................................................................21
Troubleshooting ........................................................................................................21 - 23
Parts Diagrams & Parts Lists ..................................................................................24 - 27
Notes ...............................................................................................................................28
Accessories .............................................................................................................................29
‘How To’ Guide for all Band Saw Blades ................................................................................30
Warranty ..........................................................................................................................31
TABLE OF CONTENTS
SPECIFICATIONS #10-3061
NOTE: The specications, photographs, drawings and information in this manual represent the current model when the
manual was prepared. Changes and improvements may be made at any time, with no obligation on the part of Rikon
Power Tools, Inc. to modify previously delivered units. Reasonable care has been taken to ensure that the information in
this manual is correct, to provide you with the guidelines for the proper safety, assembly and operation of this machine.
Motor ............................................................................................... 1/2 HP, TEFC
Motor Speed (no load)......................................................................... 1,720 RPM
Volts ............................................................................................................ 115 V
Amps, Hertz, Phase .................................................................. 5.5 A, 60 Hz, 1Ph
Blade Length .......................................................................... 70-1/2” (1,791 mm)
Blade Width ............................................................. 1/8” - 1/2” (3.18 - 12.7 mm**
Blade Speed ........................................... 1,515 / 3,280 ft/min (462 / 1,000 m/min)
Table Size (W x D) ............................................ 13-3/4” x 12-1/2” (350 x 320 mm)
Table Tilt ................................................................................... Left -5
0 , Right 45°
Miter Gauge Slots (1) ..................................................... 5/8” x 1/4” (16 x 6.5 mm)
Maximum Cutting Width (throat) ............................................... 9-5/8” (244.5 mm)
Maximum Cutting Depth (height) ....................................................... 5” (127 mm)
Table Height to Base ................................................................. 14-1/2” (368 mm)
Fence Height ................................................................................. 2-3/8” (60 mm)
Fence Length ............................................................................ 12-1/4’” (310 mm)
Dust Ports (1) ............................................... 2-1/2” O.D. / 2-1/4” I.D (64 / 57 mm)
Base Size (WxD) ................................................ 15-7/8” x 9-3/8” (403 x 238 mm)
Overall Height ............................................................................ 34-1/4” (870 mm)
Overall Width x Depth.............................................. 21” x 16-1/4” (534 x 413 mm)
Net Weight .............................................................................. 77.5 lbs. (35.14 kg)
1/8” (3.18mm) bandsaw blades should be 0.018” to 0.020” gauge to reduce tracking issues common with this width. *
3
SAFETY SYMBOLS
IMPORTANT! Safety is the single most important consideration in the operation of this equipment. The following
instructions must be followed at all times. Failure to follow all instructions listed below may result in electric shock,
re, and/or serious personal injury.
There are certain applications for which this tool was designed. We strongly recommend that this tool not be modied
and/or used for any other application other than that for which it was designed. If you have any questions about its
application, do not use the tool until you have contacted us and we have advised you.
SAFETY INSTRUCTIONS
GENERAL SAFETY
KNOW YOUR POWER TOOL. Read the owner’s manual
carefully. Learn the tool’s applications, work capabilities,
and its specic potential hazards.
BEFORE USING YOUR MACHINE
To avoid serious injury and damage to the tool, read and
follow all of the Safety and Operating Instructions before
operating the machine.
1. California Proposition 65 Warning: Some dust cre-
ated by power sanding, sawing, grinding, drilling and other
construction activities contains chemicals known to the
State of California to cause cancer, birth defects, or other
reproductive harm. Some examples of these chemicals are:
• Lead from lead-based paints.
• Crystalline silica from bricks, cement, and other
• Masonry products.
• Arsenic and chromium from chemically treated lumber.
Your risk from exposure to these chemicals varies, depend-
ing on how often you do this type of work. To reduce your
exposure, work in a well ventilated area and work with
approved safety equipment, such as dust masks that are
specially designed to lter out microscopic particles.
2. the entire Owner’s Manual. how to use READ LEARN
the tool for its intended applications.
3. GROUND ALL TOOLS. If the tool is supplied with a 3
prong plug, it must be plugged into a 3-contact electrical
receptacle. The 3rd prong is used to ground the tool and
provide protection against accidental electric shock. DO
NOT remove the 3rd prong. See Grounding Instructions
on the following pages.
4. AVOID A DANGEROUS WORKING ENVIRONMENT.
DO NOT use electrical tools in a damp environment or
expose them to rain.
5. use electrical tools in the presence of DO NOT
ammable liquids or gasses.
6. ALWAYS keep the work area clean, well lit, and
organized. work in an environment with oor DO NOT
surfaces that are slippery from debris, grease, and wax.
7. KEEP VISITORS AND CHILDREN AWAY. DO NOT
permit people to be in the immediate work area,
especially when the electrical tool is operating.
8. to perform an operation DO NOT FORCE THE TOOL
for which it was not designed. It will do a safer and
higher quality job by only performing operations for
which the tool was intended.
9. wear loose WEAR PROPER CLOTHING. DO NOT
clothing, gloves, neckties, or jewelry. These items can
get caught in the machine during operations and pull the
operator into the moving parts. The user must wear a
protective cover on their hair, if the hair is long, to
prevent it from contacting any moving parts.
10. CHILDPROOF THE WORKSHOP AREA by
removing switch keys, unplugging tools from the
electrical receptacles, and using padlocks.
11. ALWAYS UNPLUG THE TOOL FROM THE
ELECTRICAL RECEPTACLE when making adjust-
ments, changing parts or performing any maintenance.
SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, or CAUTION. This symbol may be used
in conjunction with other symbols or pictographs.
Indicates an imminently hazardous situation, which, if not avoided, could result in death or
serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious
injury.
Indicates a potentially hazardous situation, which, if not avoided, could result in minor or
moderate injury.
NOTICE: Shown without Safety Alert Symbol indicates a situation that may result in property damage.

Product specificaties

Merk: Rikon
Categorie: Zaagmachine
Model: 10-3061

Heb je hulp nodig?

Als je hulp nodig hebt met Rikon 10-3061 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Zaagmachine Rikon

Rikon

Rikon 10-305 Handleiding

18 November 2024
Rikon

Rikon 10-347 Handleiding

18 November 2024
Rikon

Rikon 10-3061 Handleiding

18 November 2024
Rikon

Rikon 11-600S Handleiding

18 November 2024
Rikon

Rikon 10-205 Handleiding

18 November 2024
Rikon

Rikon 10-342 Handleiding

18 November 2024
Rikon

Rikon 10-353 Handleiding

18 November 2024
Rikon

Rikon 10-600VS Handleiding

18 November 2024
Rikon

Rikon 10-110 Handleiding

16 Maart 2024
Rikon

Rikon 10-306 Handleiding

16 Maart 2024

Handleiding Zaagmachine

Nieuwste handleidingen voor Zaagmachine

Alpha Tools

Alpha Tools BSL 750 Handleiding

17 November 2024
Alpha Tools

Alpha Tools PS 600 E Handleiding

17 November 2024
Alpha Tools

Alpha Tools MHK 500 Handleiding

17 November 2024
Alpha Tools

Alpha Tools PS 520E Handleiding

17 November 2024
Pro-Cut

Pro-Cut KS-120 Handleiding

17 November 2024
Global

Global KS 2040 Handleiding

17 November 2024
Anova

Anova MG2600 Handleiding

17 November 2024
Anova

Anova M437HXP Handleiding

17 November 2024
Anova

Anova RLT8C Handleiding

17 November 2024
Anova

Anova M455HXP Handleiding

17 November 2024