Quest Commercial M120bt Handleiding

Quest Commercial Staafmixer M120bt

Lees hieronder de 📖 handleiding in het Nederlandse voor Quest Commercial M120bt (26 pagina's) in de categorie Staafmixer. Deze handleiding was nuttig voor 41 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/26

Owner’s Manual

M120bt

WARNING

TO PREVENT THE RISK OF SHOCK OR FIRE. DO NOT USE THIS CORD WITH AN EXTENSION, RECEPTACLE OR ANY OTHER OUTLET UNLESS THE BLADES

CAN BE FULLY CUT. PLEASE MATCH THE WIDE BLADE WITH THE WIDE SOCKET OPENING. TO PREVENT THE RISK OF SHOCK OR FIRE. DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

The lightning bolt with the arrow symbol

within an equilateral triangle is intended

to alert the user to the presence of

"dangerous voltage" within the

product's enclosure and may be of

sufficient magnitude to constitute a risk

of electric shock .

CAUTION: To reduce the risk of electric

shock, do not remove cover. No user

serviceable parts. Refer servicing to a

qualified service technician.

The exclamation mark within an

equilateral triangle is intended to alert

the user to the presence of important

operating and maintenance information

in the literature accompanying this

device.

IMPORTANT SAFETY INSTRUCTIONS

1. Please read all instructions before using the device.

2. Keep these instructions for future reference.

3. Read all safety instructions carefully.

4. Follow the manufacturer's instructions.

5. Do not use this device near a liquid source or in a humid place.

6. Only clean the device with a damp cloth.

7. Please do not obstruct the slots provided for the ventilation of the device. Install the device according to the

manufacturer's instructions.

8. Do not install near a heat source (radiators, etc.) or any equipment likely to generate heat (power amplifiers for

example).

9. Do not remove the ground from the power cord or wall outlet. Canadian plugs with polarization (with a wider blade)

should not be modified. If your wall outlet does not match the model provided, consult your electrician.

10. Protect the power cord against all possible damage (pinching, tension, twisting, etc.). Make sure that the power cord

is free, in particular when it comes out of the b . ox

11. Disconnect the device from the mains in the presence of a storm or during prolonged periods of non-use.

12. Consult a qualified repair service center for any malfunction (damage to the power cord, drop in performance,

exposure to rain, liquid splashing into the device, introduction of an object into the case, etc.).

M120bt

Table of Contents

Introduction ............................................................................................................................................................................ 2

Features .................................................................................................................................................................................. 3

Controls ................................................................................................................................................................................... 4

Installation .............................................................................................................................................................................. 6

Wiring Guide ........................................................................................................................................................................... 9

Operations ............................................................................................................................................................................ 12

Music Hold (MoH) on .......................................................................................................................................................... 13

Media Module ..................................................................................................................................................................... 15

Block Diagram ....................................................................................................................................................................... 17

Specifications ........................................................................................................................................................................ 18