Queenaire QT Tornado QTT625 Handleiding

Queenaire Luchtreiniger QT Tornado QTT625

Lees hieronder de 📖 handleiding in het Nederlandse voor Queenaire QT Tornado QTT625 (2 pagina's) in de categorie Luchtreiniger. Deze handleiding was nuttig voor 39 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/2
QUEENAIRE TECHNOLOGIES, INC.
“The Ozone Specialists”
Queenaire Technologies, Inc.
P.O. Box 133
Ashburn, VA 20146
Toll Free: 1-877-64 OZONE
Tel: 1-703-654-0385 Fax: 1-703-654-0386
Volume
1
Owners Manual
QT Tornado
Troubleshooting Guide
If you are having problems with your ozone machine please refer to the following instructions:
1. The fan comes on, but the green light does not. Remove the top
cabinet from the unit and check the condition of the ceramic plate.
Replace if broken. Replace top cabinet. Remove and replace the .200
milliamp fuse in the back of the unit. If the green indicator light is still
out contact Queenaire Technologies Customer Service at 1-877-64
OZONE.
2. When you turn the unit on nothing happens. First check your power
source to ensure there is power to the outlet. Plug the unit in. Check
the fuse marked 2 amp on the back of the unit. Replace if blown. If the unit still does not operate
contact Queenaire Technologies Customer Service department at the number above.
3. If for any reason you are not happy with the performance of this unit contact customer service at
1-877-64 OZONE.
Operating QT Tornado
Following are basic guidelines for eliminating odors continuously in rooms up to 10,000 cubic feet.
his unit is designed to be used either continuously in areas that have ongoing odor
problems or as a maintenance tool to quickly eliminate odors on a portable basis in areas
up to 40,000 cubic feet. You can maximize the results if you expose fabrics fully, open
interior doors and turn on your air handling system. Keep in mind that ozone is a surface
agent and must make contact with the source of the odors to insure complete deodorization. While
this unit is designed to run continuously it should be monitored to insure that ozone levels do not
exceed OSHA safety levels of .04 ppm. Following is a formula and chart to help you determine
the best setting for your ozone unit when dealing with specic odors. This is a general guideline
only as the output will vary substantially depending on the odor factor, temperature and humidity.
AREA x ODOR FACTOR = MG/HR REGUIRED
1. Measure the Cubic Footage (L x W x H) of the room to be treated = A (area)
2. Estimate the Odor Factor (B) as follows:
* Light Odors = 0.005
* Medium Odors = 0.018
* Strong Odors = 0.036
3. Multiply A x B to determine MG/HR needed to eliminate the odor.
4. Use the chart to the Right to determine the setting for your unit.
5. Adjust the settings as needed for complete odor control.
Example: A room 50' x 50' x 8' = 20,000 cu/ft x .018 Medium Odor = 360 mg/hr. Set ozone
knob to 6. While smell is not an accurate guide to ozone levels, in levels above .03 ppm ozone
has a very strong unpleasant odor. If you are experiencing a strong odor, headache, dry nose
and/or dry throat, you should either turn the unit down or o to allow the levels to dissipate.
Now that you have determined the approximate MG/HR necessary to eliminate the odor, operating
instructions are as follows:
1. Turn ozone-setting knob to appropriate setting.
2. Set the timer as follows: 1 = 15 min., 2 = 30 min., 3 = 45 min., 4 = 1.5 hr., 5 = 3.5 hr., 6 = continuous.
3. Plug the unit into a standard outlet.
4. Place the unit on a table or counter o the ground. Ozone is heavier than air, so the higher the
better.
5. Turn the unit on.
6. Be sure to monitor the unit and adjust ozone setting as required for complete odor control.
7. Perform maintenance on your QT Tornado on a monthly basis. Maintenance instructions can be
found on the last page of this manual.
How Does QT Tornado Eliminate Odors?
All Queenaire Technologies, Inc. units eliminate odors by producing a controlled level of ozone.
Ozone is created naturally in our environment by lightning and the suns ultraviolet rays. It is best
known for its benet in the stratosphere for protecting us from the suns rays. What you may not
know is that it is also that fresh smell you experience after a lightning storm. Ozone is Mother
Nature’s solution to outdoor odor problems. QT Tornado incorporates a technology that duplicates
the eect of lightning and creates ozone indoors. The end result is the same, a fresh, odor free
environment.
QT Tornado Maintenance Instructions
The life expectancy of your QT Tornado unit is 10 - 15 years, provided it is serviced and main-
tained on a regular basis. It is recommended that you perform a simple cleaning and maintenance
of your unit every six months. The lter should be changed monthly. High contaminate areas such
as smoking and garbage rooms may require monthly cleaning. Maintenance kits are available
through your distributor.
Before you begin performing any work to your ozone unit, be sure to unplug the electrical cord.
Step 1.) Remove two screws on the top of the unit as well as the top two screws on each side of the
unit. Remove the top cover from the unit.
Step 2.) Carefully remove the white ceramic generator plate from its frame. The plate should lift
easily by pulling from the top straight up and out of the frame. Use an alcohol wipe to gently wipe
the plate free of any dirt or stains. Inspect the plate carefully for cracks, breaks or irremovable
stains. The plate can be reused provided there are no breaks or stains.
Step 3.) Use the same alcohol wipe to wipe out the exposed areas inside the unit. Spread the
generator frame apart to wipe the inside of the metal plates that make contact with the generator
plate. Be sure to also wipe the base of the frame completely.
Step 4.) Once the ceramic plate is completely dry, reinsert the plate into the generator frame or
replace the existing plate.
Step 5.) Reattach the top cover to the unit and put screws back in place.
Step 6.) Remove and discard the green lter on the back of the machine and replace with new
filter.
Step 7.) You may at this point have to change your 200mA fuse. To test your fuse, simply turn the
unit on. If the green ozone light comes on you have completed maintenance of the unit and are
ready to put it back in service. If the light does not come on, locate the 200mA fuse holder on the
back of the unit and remove the holder with a at head screwdriver by turning the holder 1/4 turn.
Remove the blown fuse and replace with the fuse enclosed in your maintenance kit. Your unit
should now be ready to go back to work.
Ozone
Setting
1
2
3
4
5
6
7
8
9
10
MG/HR
51 mg/hr
110 mg/hr
160 mg/hr
230mg/hr
280 mg/hr
360 mg/hr
429 mg/hr
501 mg/hr
541 mg/hr
600 mg/hr
T

Product specificaties

Merk: Queenaire
Categorie: Luchtreiniger
Model: QT Tornado QTT625

Heb je hulp nodig?

Als je hulp nodig hebt met Queenaire QT Tornado QTT625 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Luchtreiniger Queenaire

Queenaire

Queenaire QT Tornado QTT625 Handleiding

6 Juni 2023
Queenaire

Queenaire QT Cyclone QTC1250 Handleiding

25 Mei 2023
Queenaire

Queenaire QT Thunder-24 QTT24-II Handleiding

12 Mei 2023
Queenaire

Queenaire QT Storm QTSV Handleiding

11 Mei 2023
Queenaire

Queenaire QT Thunder QTT3F Handleiding

5 Mei 2023

Handleiding Luchtreiniger

Nieuwste handleidingen voor Luchtreiniger

Levoit

Levoit Core 300S Plus Smart Handleiding

27 December 2024
Meaco

Meaco 12L - Low Energy Handleiding

14 September 2024
Mitsubishi

Mitsubishi MA-83H-W Handleiding

14 December 2024
Vicks

Vicks EasyCare+ Top Fill Handleiding

10 December 2024
SĂ´lt

SĂ´lt GGSPA360W Handleiding

8 December 2024
SĂ´lt

SĂ´lt GGSPA500W Handleiding

8 December 2024
SĂ´lt

SĂ´lt GGSPA600W Handleiding

8 December 2024
SĂ´lt

SĂ´lt GGSPA200W Handleiding

8 December 2024
Rikon

Rikon 61-200 Handleiding

4 December 2024
Shark

Shark NeverChange5 HP150 Handleiding

1 December 2024