QTX U-MIC-863.2-N Handleiding

QTX Microfoon U-MIC-863.2-N

Lees hieronder de đź“– handleiding in het Nederlandse voor QTX U-MIC-863.2-N (4 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 43 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
U-MIC
Item ref: 171.808UK 171.809 UK
USB Powered UHF Neckband Microphone
User Manual
Version 1.1
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
U-MIC-N User Manual
Introduction
Thank you for choosing the U-MIC for your wireless microphone requirements.
This system is designed to provide a reliable, cable-free solution with minimal
setup and ease of use. Please read and keep this user manual to get the best
results from your product and avoid damage through misuse.
Layout
Setting up
The U-MIC is supplied as a neckband microphone, beltpack transmitter and USB
receiver with a 3.5mm to 6.3mm jack lead.
The USB type A plug (6) on the receiver should be connected to a USB port for
power (5V, 00mA). This can be from a USB power adaptor or power bank for 10
portable use if required. The connection can also be made to the receiver using
an optional USB extension lead if preferred.
Note: the audio is not transmitted to the USB port. The USB is for power only.
If the USB port is a U-Disk player or computer port, the digital media (USB stick)
or other peripheral device can still be connected through the receiver by
connecting to the USB type A socket (8) on the rear of the receiver.
1.
Volume control
2.
3.5mm neckband mic input
3.
LED power indicator
4.
Power switch
5.
Battery compartment (rear)
6.
USB type A plug
7.
3.5mm audio output
8.
USB type A socket
U-MIC-N User Manual
Operation
The U-MIC receiver is designed to connect to a microphone input channel on a
mixer or amplifier. Turn down the volume level on the microphone input of the
mixer or amplifier before connecting to avoid loud noises when connecting.
Connect the 3.5mm plug end of the supplied lead to the U- receiver (7) and MIC
the 6.3mm plug into appropriate microphone input channel. an
The beltpack transmitter has an on/off switch (4), which should be in the up
position (off). The top volume control (1) should be turned fully down. Connect
the neckband microphone to the 3.5mm microphone input (2).
Slide open the cover of the battery compartment (5) and insert 2 x AA alkaline
batteries, ensuring that the polarity is the correct way around.
Move the switch down 3) should to the “on” position and the power indicator (
light. Note that the switch has a centre position which is also . “on”
Gradually turn up the volume control on top of the transmitter and the level on
the mixer or amplifier and speak into the neckband microphone until the sound
can be heard through the connected speakers or recording equipment. Increase
the volume to the required level.
If the microphone is not being used, turn down the volume level on the top of the
beltpack transmitter and the mixer/amplifier and switch the power off.
For long term storage, unplug the jack and USB receiver and remove the
batteries f m the beltpack transmitter. ro


Product specificaties

Merk: QTX
Categorie: Microfoon
Model: U-MIC-863.2-N
Gewicht verpakking: 150 g
Breedte verpakking: 95 mm
Diepte verpakking: 270 mm
Hoogte verpakking: 58 mm
Meegeleverde kabels: Audio (3,5 mm tot 6,3 mm)
Ondersteund aantal accu's/batterijen: 2
Aansluitbereik: 50 m
Microfoontype: Headset-microfoon
Receiver afmetingen (B x D x H): 80 x 23 x 13 mm
Ontvanger type: Stationaire ontvanger
Microfoonaansluiting: RF Draadloos
Batterijen inbegrepen: Ja
Type batterij: AA
Frequentierespons microfoon: 50 - 15000 Hz
Type energiebron van microfoon: Batterij/Accu
Ontvangerdisplay: Nee
Zendretype: Handzender
Type werkfrequentie: Ultrahoge frequentie (UHF)
Uitgang van 6,35 mm (1/4-inch): 1
Bedrijfsspanning (ontvanger): 5 V
Receiver gewicht: 17 g
Transmitter afmetingen (WxDxH): 105 x 65 x 30 mm
Transmitter gewicht: 67 g
Gewicht microfoon: 21 g
3,5 mm in: Ja
Aantal ontvangers inbegrepen: 1
Aantal zenders inbegrepen: 1
Zenderdisplay: Nee
Aantal microfoons inclusief: 1
Draagfrequentie: 864800 kHz

Heb je hulp nodig?

Als je hulp nodig hebt met QTX U-MIC-863.2-N stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Microfoon QTX

QTX

QTX J-MIC Handleiding

5 Maart 2024
QTX

QTX VHN2 Handleiding

16 Februari 2023
QTX

QTX VL1 Handleiding

26 Januari 2023
QTX

QTX VH1 Handleiding

13 Januari 2023
QTX

QTX U-MIC-863.2 Handleiding

14 December 2022
QTX

QTX VN2 Handleiding

17 Oktober 2022

Handleiding Microfoon

Nieuwste handleidingen voor Microfoon