Synco PX Handleiding

Synco Microfoon PX

Lees hieronder de 📖 handleiding in het Nederlandse voor Synco PX (2 pagina's) in de categorie Microfoon. Deze handleiding was nuttig voor 2 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Microphone P1X

User Manual

Thank you for choosing SYNCO product. Please read this manual

carefully before use and follow all instructions mentioned herein.

1. TX Transmitter

2. RX Receiver

① Power Key

② Working Indicator

③ Built-in Microphone

④ Back Clip

⑤ Type-C Charging Port

Lightning Connector

Type-C Connector

① Volume Button

② Type-C Port

③ Working Indicator

④ Connector

Caring For Your SYNCO Product

Package List

Product Introduction

· Please keep the product in a dry, clean, dust-free environment.

· Keep corrosive chemicals, liquids and heat source away from the

product to prevent mechanics damage.

· Use only a soft and dry cloth for cleaning the product.

· Malfunction may be caused by dropping, impact of external force.

· Do not attempt to disassemble the product. Doing so voids

warranty.

· Please have the product checked or repaired by authorized

technicians if any malfunctions happened.

· Failure to follow all the instructions may result in mechanics

damage.

· Warranty does not apply to human errors.

① Transmitter

② Receiver

Slow Flash

Illuminate sequentially

1~5 indicators on

Single indicator keeps on

Single indicator 󽗊ashed

slowly

Unpaired

Paired, normal working

Connected and working normally.

The number of lights on indicates the

current volume

Noise cancellation on

Mute on

Working Indicators (White Light) On： Flash：

1. Turn On/O󽗈

Operations

① Transmitter: Long press the power button of the transmitter for 3

seconds.

*Note：The transmitter will shut down automatically if it is unpaired

or disconnected for 5 minutes.

② Receiver: Insert the mobile phone device to switch on

automatically, and the indicator 󽗊ashes.

Transmitter x1 Charging cable

Mic Windshield

Receiver (Type-C or

Lightning Connector)

3. Indicator

* Note：The indicator identi󽗉cation shown as follows.

Left Right

2. Charge

Transmitter：

Charge the transmitter via the Type-C charging

port and charging cable.

Mobile Phone :

Insert your phone's charging cable into the Type-C port of the

receiver when in use, and the charging current is adjusted according

to the phone's battery max up to 800mA.

*Note: The receiver does not need to be charged and can be used

directly when plugged in the phone.

3. Paring

The transmitter and receiver will automatically start pairing once

power on.

*Note: For P1XT/L, each transmitter can only pair with a receiver.

Carrying Bag x1 User Manual x1

Warranty Period

Warranty Exclusions and Limitations

Warranty Claim Procedure

Thank you for purchasing SYNCO products.

1. Customers are entitled to free replacement or repair service in case

of quality defect(s) found in the product under normal use within 30

days upon receipt of the product.

2. Original SYNCO products are entitled to 12-month limited warranty

service. The warranty period begins on the date of purchase of brand

new, unused products by the 󽗉rst end-user.

Within the warranty period, if product defect or failure is attributable

to material defection or technological problem, the defective product

or defective part will be repaired or replaced without charge (service

and materials fee).

Faults resulted from inappropriate use of a product without

following its operation speci󽗉cation

1. Arti󽗉cial damage, e.g. crash, squeeze, scratch, or soaking

2. Modi󽗉cations to a product by its user or a third party without prior

written consent of SYNCO, e.g. replacement of element or circuit,

label alteration

3. The code on product is inconsistent with that of warranty

certi󽗉cate, or the code on the product or warranty certi󽗉cate is

altered or torn o󽗈

4. All consumable accessory attached to a product, like cable, wind

mu󽗈, battery

5. Faults as a result of force majeure, such as 󽗉re, 󽗊ood, lightning, etc.

1. If failure or any problem occurs to your product after

purchase, please contact a local agent for assistance, or you can

always contact SYNCO’s customer service through email at

support@syncoaudio.com.

2. Please retain your sales receipt and warranty certi󽗉cate as proof of

purchase. If any of these documents is missing, only sales return or

chargeable service will be provided.

3. If the SYNCO product is out of the warranty coverage, the service

and the parts cost will be charged.

Warranty

*Please register your warranty. Meanwhile, you are welcomed to contact us via Email：

support@syncoaudio.com

Product Model:

Date of Purchase:

Serial Number:

Malfunction Description :

Buyer Name:

Buyer Telephone :

Buyer Mail :

Buyer Address :

Dealer :

Dealer Telephone :

Delivery Date :

Cause of Malfunction :

Maintenance Personnel :

Malfunction Processing :

WARRANTY CERTIFICATE

Wireless Transmission

RF Frequency Band

Frequency Response

Working Distance

Sampling Rate

Bit Depth

Sensitivity

SNR

Battery Type

Battery Charging Time

Battery Life

Dimensions

Material

Weight

Wireless Transmission

RF Frequency Band

Working Distance

Sampling Rate

Bit Depth

Connector

Power Input

Dimensions

Material

Weight

Digital 2.4GHz

2400-2483.5MHz

20Hz-20KHz

492ft/150m(LOS area);

164ft/50m(NLOS area)

48KHz

16Bit

-36dB

＞ 75dB

Built-in Lithium Battery, 120mAh

1.5H

49x19x19 (mm)

ABS

10g

Digital 2.4GHz

2400-2483.5MHz

492ft/150m(LOS area);

164ft/50m(NLOS area)

48KHz

16Bit

Type-C or Lightning Output

Type-C

49x30x9 (mm)

ABS

TX Transmitter

RX Receiver

Speci󽗉cations

Guangzhou Zhiying Technology Co., Ltd

Room 2401, 24 / F, South Tower, Lisheng Plaza, No. 68 Huadi Avenue,

Liwan District, Guangzhou, China, 510000

support@syncoaudio.com

www.syncoaudio.com

4. Adjust the Volume

Press the receiver volume button to adjust the volume and the

number of indicators shows the current volume level.

Double press the volume button to enable or disable mute and single

indicator keeps on when mute is on.

Lv.1

Lv.2

Lv.3

Lv.4

Lv.5

Mute

5. Noise Reduction

Press the power button of the transmitter to turn on the noise

reduction, the single indicator keeps on.

* Double press the power button of the transmitter to turn o󽗈/on the

light e󽗈ect.

Product specificaties

Merk:	Synco
Categorie:	Microfoon
Model:	PX

Heb je hulp nodig?

Als je hulp nodig hebt met Synco PX stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Microfoon Synco

Synco G2 Max Handleiding

2 April 2025

Synco G1 Pro Handleiding

2 April 2025

Synco G1A1 Handleiding

2 April 2025

Synco G2A2 Handleiding

2 April 2025

Synco MC3 LITE Handleiding

2 April 2025

Synco PX Handleiding

2 April 2025

Synco G2A1 Handleiding

2 April 2025

Synco LAV-S6P Handleiding

29 Maart 2025

Synco P2S Handleiding

27 Maart 2025

Synco MA30 Handleiding

27 Maart 2025

Handleiding Microfoon

Nieuwste handleidingen voor Microfoon

Atlas Sound MWHHM Handleiding

2 April 2025

Comica VP3 Handleiding

1 April 2025

Samson Concert XD2 Handleiding

29 Maart 2025

Astatic 827A Handleiding

27 Maart 2025

TC Helicon GoXLR MIC Handleiding

27 Maart 2025

MXL Forge Handleiding

21 Maart 2025

Austrian Audio OC16 Handleiding

18 Maart 2025

Kenwood KMC-32 Handleiding

18 Maart 2025

Kenwood KMC-70 Handleiding

18 Maart 2025

Kenwood KMC-66 Handleiding

18 Maart 2025