Proaim TP-SPH-01 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Proaim TP-SPH-01 (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 9 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
What In Boxs The
Please inspect the contents of your shipped package to ensure you have received everything that is
listed below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo copying, recording, or otherwise, except as may be expressly permied by the applicable -
copyright statutes or in wring by the Publisher.
Professional Speech Teleprompter (T SPH )P- -01
A s s e m b l y M a n u a l
LCD Stand Base Plaorm
Accessories
Main Rod
2 x Rods
I pad Tray- Gloves
Glass
Telescopic
Rod
NOTE: The teleprompter glass has a different amount of reflectivity at both ends. If the glass is not
installed in proper orientation than you may experience a "double image" or "text shadow" effect on the
teleprompter. To eliminate this, we have applied a White sticker on the front side of the glass. Incase, the
mark gets removed and you face this issue, simply flip the teleprompter glass.
Glass Cleaning
Cloth
2
Teleprompter Setup
To keep the Stand Plaorm in a stac posion
(non movable), lock down the wheels using-
the provided brakes.
Aach the main rod with a telescopic rod and
secure it by twisng them.
Now insert the main rod onto the Base
Plaorm and ghten bolts with the Allen
key's help.
If you want to extend the stand's height, you
can raise the 3rd secon using a speed crank
knob. Tighten the knob aer geng the
desired size.
If you further need to increase the height,
then loosen the bolt from the boom of the
telescopic rod, adjust as per the required
height and ghten the bolt to secure.
Loosen both the knobs of the iPad tray clamp
and adjust as per the required height.
3
Loosen the knobs of the iPad clamp to insert
both rods & ghten the knobs to secure
them.
Loosen the knob of iPad tray, Insert the iPad
secon & ghten the knob.
Aach the iPad tray with clamp and ghten
both side knobs to secure it.
NOTE: You can adjust the angle of the glass by
using the provided knob as shown.,
Centre align the glass and place in the glass
holder and ghten the knob to secure.


Product specificaties

Merk: Proaim
Categorie: Niet gecategoriseerd
Model: TP-SPH-01

Heb je hulp nodig?

Als je hulp nodig hebt met Proaim TP-SPH-01 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Proaim

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd