Proaim DL-BRZA-01 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Proaim DL-BRZA-01 (7 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 4 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/7
What s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Breeza Video/Film Camera Dolly Slider
with Track Ends (DL- -BRZA 01)
A s s e m bl y M a n u a l
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo copying, recording, or otherwise, except as may be expressly permied by the applicable copyright -
statutes or in wring by the Publisher.
Proaim Breeza Dolly
3 x Bolts
Sizes: (6 x 12 mm)
2 x End Spacers
An Tilt Safety -
Brake
Flat Mount Plate
Bag Packing
75mm Bowl
Adapter
3 x Type Allen Keys
Sizes: 2.5, 4mm & 5mm
2 x Wrench Sizes: 17 & 13mm
1 x Low Prole Middle -
Support Spacer
Heavy Duty Sled
4 x Double Wheels
100mm Bowl Adapter
2
End Spacers Assembly
Insert a 4 track into the clamp. Once the
track is properly ed into the clamp, ghtly
secure it with the knob, as shown in the
image.
The height of the end feet of the end spacers
can be adjusted according to your setup
requirement with the help of a knob.
The end feet can be used in both, Hi Hat and-
Low Hat mode accordingly.-
The same process is to be followed for the
other track.
NOTE: It comes with track ends for overall -
secure and smooth track running.
To insert a track in the end spacers, rst
loosen the knobs of the clamp and then slide
up the clamp to easily t the track.
Now place the breeza dolly onto the 4 track.
The handles part of the dolly plaorm should
be inside of the track as shown. Make sure all
wheels are aligned correctly on the track and
dolly runs smoothly.
NOTE: Proaim Breeza Compact Portable Slider
Dolly integrates the latest technology with
supreme quality to maximize your creave
potenal.
Breeza Dolly Setup
3
Properly secure with a knob aer mounng
the safety brake. Follow the same process on
the other side.
Now mount a 75mm bowl adapter, insert the
screws and properly secure the adapter with
the help of an Allen key.
The 75mm bowl adapter is mounted on the
dolly plaorm, as shown in the image.
NOTE: It has a 16 wheel design with oang -
trucks that gives smooth, squeak free move on a -
straight or curved track.
The dolly plaorm already has a 100mm bowl
adapter mount. To mount a 75mm bowl, rst
loosen the screws using an Allen key and
remove the 100mm bowl.
NOTE: The Breeza dolly plaorm is designed
with a Bowl mount 75mm, 100mm, and an at
base mount.
Mount the Safety Brake on side of the Breeza
dolly plaorm. Adjust the posion of the
bracket so it goes under the track to prevent
the plaorm from lng out.
Loosen the knob to properly open the safety
brake.
An Tilt Safety Brake Assembly-


Product specificaties

Merk: Proaim
Categorie: Niet gecategoriseerd
Model: DL-BRZA-01

Heb je hulp nodig?

Als je hulp nodig hebt met Proaim DL-BRZA-01 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Proaim

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd