Pro-Ject T2W Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Pro-Ject T2W (2 pagina's) in de categorie Platenspeler. Deze handleiding was nuttig voor 26 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
T2 W Setup Guide
Getting started:
• Make sure to have enough space to unpack your turntable.
• Always unpack and set up in a clean environment.
• Please Do throw away the packaging! If you need service or NOT
want to return your product, please send it in the original packaging
including all inserts. In case of damage due to alternative packaging
your dealer cannot guarantee a full refund.
• Full manual: www.project-audio.com/en/product/t2w
1Unpack all items from the accessorie bag. Remove the dustcover. 3
5
2
4
Remove the turntable from the box.
Unpack glass-platter and felt mat from the bottom of the carton. Unpack the power supply unit.
a) Single adapter
b) Drive belt
c) Connect it E cable
d) Gauge
e) Alignment tool
a)
8Remove cartridge cap.
Put the felt mat on the platter.
Remove tonearm and counterweight protection inlays.
10
11
6Remove the protective cloth.
7Put the drive belt over the sub-platter.
b) c)
d) e)
12 Remove the red tonearm security tape.
14 Connect to your stereo system. T2 W wireless setup on the back of this paper. 16 17
Connect it E RCA cable
to amplier line input 33 R
45 RPM
Power Cable
Select the playback speed. Have fun with music!
Service
Should you encounter a problem which you are not able to alleviate or identify despite the above information, please contact your dealer for
further advice. Only when the problem cannot be resolved there should the unit be sent to the responsible distributor in your country.
Warranty repairs will only be aected if the unit is returned correctly packaged. For this reason we recommend keeping the original packa-
ging.
Never return a record player without making sure that is it safely disassembled and correctly packaged in the original packaging according
to the diagrams on the last page of this user guide. Please remove these parts and pack them separately: lid, counterweight, anti-skating
weight and belt.
Fit the cartridge protection cap and the transport lock for the tonearm tube, prior to carefully packaging the record player.
Warranty
The manufacturer accepts no responsibility for damage caused by not adhering to these instructions for use and/or by transportation
without the original packaging. Modication or change to any part of the product by unauthorized persons, release the manufacturer from
any liability over and above the lawful rights of the customer.
Warranty: Terms and Conditions
• A warranty is valid only for products purchased from an authorized Pro-Ject Audio Systems retailer or dealer.
• This warranty oer is limited to the repair of the equipment (which could be a repair or replacement at our discretion, neither of which
aects your original warranty).
• Neither transportation or any other costs, nor any risk for removal, transportation and installation of products is covered by this
warranty.
• A warranty is only valid for the original owner. It is not transferable.
• To validate your warranty, you will need to provide the original sales invoice or other proof of ownership and date of purchase.
• Warranty must be claimed within two years of purchase from an authorized dealer. After this period of time, the warranty will expire.
• The legal warranty obligation exists in addition to this warranty and is not limited by this warranty.
A Pro-Ject Audio Systems warranty relates to claims of defects in materials and/or workmanship at the time of purchase. It does not cover:
• Deterioration of component parts, the nature of which is to become worn or depleted with use, such as batteries and headphone ear
pads, drive belts and cartridges.
• Damages caused by incorrect installation, connection or packing.
• Damages caused by any use other than the correct use described in the user manual, negligence, modications, or use of parts that
are not made or authorized by Pro-Ject Audio Systems.
• Damages caused by faulty or unsuitable ancillary equipment.
• Damages caused by accidents, lightning, water, re heat, war, public disturbances or any other cause beyond the reasonable control of
Pro-Ject Audio Systems and its appointed distributors.
• Products where the serial number has been altered, deleted, removed or made illegible.
• Repairs or modications that have been executed by an unauthorized person.
Commercial Use
Faults caused due to using domestic products in commercial environments or on commercial scales are not covered by warranty. This
turntable is intended for domestic use only. Using them for business applications are done so at your own risk.
Pro-Ject Audio Systems is a Registered Trademark of H. Lichtenegger.
This guide was produced by: Pro-Ject Audio Systems
Copyright © 2023. All rights reserved.
The information, pictures and gures were correct at the time of going to press. The manufacturer reserves the right to make changes to
the technical specication without prior notice as deemed necessary to uphold the ongoing process of technical development.
Contains FCC ID: 2AJYB-S1955
Need help?
Feel free to contact us. We have experienced
partners all over the world. Find your dealer here:
www.project-audio.com/en/nd-a-dealer/
Connect to your Wi-Fi and start streaming.
Wi-Fi Quick Setup
T2 W
SG027
1
2
Install Pro-Ject Control App from Apple
App Store or Google Play Store.
WiFi Connection:
Check Red LED light blinking
Wi-Fi Control
Button
Wi-Fi Control
LED light
Ethernet
Socket
Wi-Fi
Reset Button
(recessed)
Red static: Wi-Fi module starting up
Red blinking: Module started up, no ethernet or Wi-Fi connection established
Green static: Connected to ethernet or Wi-Fi network
Blue static: Streaming audio
Blue blinking: Previous streaming receiver unavailable
Wi-Fi Control Button
Press for 2 seconds: Turns Wi-Fi on or o
Short press: When turned on, start streaming to the
previously selected streaming device
Start streaming records by choosing
your network streaming device. Active
streams are indicated with a blue outli-
ne. Stop streaming by tapping the device
again and the blue outline dissapears.
Stream to as many devices as you like.
After Wi-Fi setup is complete, the Wi-Fi
Control LED will light up green. You
will now see the the T2 W in the home
screen.
Initial Wi-Fi setup works via Bluetooth,
please make sure Bluetooth is turned on
on your phone and the Pro-Ject Control
App has Bluetooth access. Open the
App, wait a few seconds until the App
has scanned for your T2 W and tap Wi-Fi
Setup.
Wi-Fi Sleep Mode/Wake Up
Settings Device selection
home screen
Stream Selection Screen/
Refresh Stream List
Visit www.project-audio.com/en/product/t2w
for FAQ‘s and full manual


Product specificaties

Merk: Pro-Ject
Categorie: Platenspeler
Model: T2W

Heb je hulp nodig?

Als je hulp nodig hebt met Pro-Ject T2W stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Platenspeler Pro-Ject

Handleiding Platenspeler

Nieuwste handleidingen voor Platenspeler