Power Dynamics PDM-S804A Handleiding

Power Dynamics Mengpaneel PDM-S804A

Lees hieronder de 📖 handleiding in het Nederlandse voor Power Dynamics PDM-S804A (28 pagina's) in de categorie Mengpaneel. Deze handleiding was nuttig voor 53 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/28

PDM Stage Mixer Series

Ref. nr.: 172.630; 172.6 ; 172.632 34

INSTRUCTION MANUAL

GEBRUIKSAANWIJZING

BEDIENUNGSANLEITUNG

MANUAL DE INSTRUCCIONES

MANUEL D'INSTRUCTIONS

INSTRUKCJA OBSŁUGI

V1.0

ENGLISH

Congratulations to the purchase of this Power Dy product. Please read this manual thoroughly prior to using the unit in namics

order to benefit fully from all features.

Read the manual prior to using the unit. Follow the instructions in order not to invalidate the warranty. Take all precautions to

avoid fire and/or electrical shock. Repairs must only be carried out by a qualified technician in order to avoid electrical shock.

Keep the manual for future reference.

- Prior to using the unit, please ask advice from a

specialist. When the unit is switched on for the first time,

some smell may occur. This is normal and will disappear

after a while.

- The unit contains voltage carrying parts. Therefore do

NOT open the housing.

- Do not place metal objects or pour liquids into the unit

This may cause electrical shock and malfunction.

- Do not place the unit near heat sources such as

radiators, etc. Do not place the unit on a vibrating

surface. Do not cover the ventilation holes.

- The unit is not suitable for continuous use.

- Be careful with the mains lead and do not damage it. A

faulty or damaged mains lead can cause electrical shock

and malfunction.

- When unplugging the unit from a mains outlet, always

pull the plug, never the lead.

- Do not plug or unplug the unit with wet hands.

- If the plug and/or the mains lead are damaged, they

need to be replaced by a qualified technician.

- If the unit is damaged to such an extent that internal

parts are visible, do NOT plug the unit into a mains outlet

and DO NOT switch the unit on. Contact your dealer. Do

NOT connect the unit to a rheostat or dimmer.

- To avoid fire and shock hazard, do not expose the unit to

rain and moisture.

- All repairs should be carried out by a qualified technician

only.

- Connect the unit to an earthed mains outlet (220-

240Vac/50Hz) protected by a 10-16A fuse.

- During a thunderstorm or if the unit will not be used for a

longer period of time, unplug it from the mains. The rule

is: Unplug it from the mains when not in use.

- If the unit has not been used for a longer period of time,

condensation may occur. Let the unit reach room

temperature before you switch it on. Never use the unit in

humid rooms or outdoors.

- To prevent accidents in companies, you must follow the

applicable guide lines and follow the instructions.

- Do not repeatedly switch the fixture on and off. This

shortens the life time.

- Keep the unit out of the reach of children. Do not leave

the unit unattended.

- Do not use cleaning sprays to clean switches. The

residues of these sprays cause deposits of dust and

grease. In case of malfunction, always seek advice from

a specialist.

- Do not force the controls.

- This unit is with speaker inside which can cause

magnetic field. Keep this unit at least 60cm away from

computer or TV.

- This unit is with built acid rechargeable battery. - -in lead

Please recharge the battery every 3 months if you are

not going to use the unit for a long period of time. Or the

battery may be damaged.

- If the battery is damaged please replace with same

specifications battery. And dispose the damaged battery

environment friendly.

- If the unit has fallen, always have it checked by a

qualified technician before you switch the unit on again.

- Do not use chemicals to clean the unit. They damage the

varnish. Only clean the unit with a dry cloth.

- Keep away from electronic equipment that may cause

interference.

- Only use original spares for repairs, otherwise serious

damage and/or dangerous radiation may occur.

- Switch the unit off prior to unplugging it from the mains

and/or other equipment. Unplug all leads and cables

prior to moving the unit.

- Make sure that the mains lead cannot be damaged when

people walk on it. Check the mains lead before every use

for damages and faults!

- -The mains voltage is 220 240Vac/50Hz. Check if power

outlet match. If you travel, make sure that the mains

voltage of the country is suitable for this unit.

- Keep the original packing material so that you can

transport the unit in safe conditions.

This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sufficient

magnitude to cause a shock hazard.

This mark attracts the attention of the user to important instructions that are contained in the manual and that he should

read and adhere to.

The unit has been certified CE. It is prohibited to make any changes to the unit. They would invalidate the CE certificate and

their guarantee!

NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and

35 95°C/ °F .

Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your

dealer about the way to proceed. The specifications are typical. The actual values can slightly change from one unit to the other.

Specifications can be changed without prior notice.

Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the unit. This would also invalid

your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the warnings

contained in this manual. Power Dynamics cannot be held responsible for personal injuries caused by a disrespect of the safety

recommendations and warnings. This is also applicable to all damages in whatever form.

UNPACKING INSTRUCTION

CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are

present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if

any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing

materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original

factory box and packing.

If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The

arising condensation water might damage your device. Leave the device switched off til it has reached room temperature. un

POWERSUPPLY

On the label on the backside of the is indicated on this type of power supply must be connected. Check that the mains product

voltage corresponds to this, all other voltages than specified, the product be irreparably damaged. The product must also be

directly connected to the mains and may be used. No dimmer or adjustable power supply.

Always connect the device to a protected circuit (circuit breaker or fuse). Make sure the has an appropriate device

electrical ground to avoid the risk of electrocution or fire.

CONTROL ELEMENTS

1. M icrophone Input

Balanced XLR input jacks.

2. L ine Input

Balanced 6.3mm (¼”) jack line inputs. You can connect either balanced or unbalanced phone

plugs to these jacks.

3. cator 48V indi

The red LED lights up when phantom power is switched on. Phantom power is required to

operate condenser microphones.

4. Phantom +48V

This switch toggles phantom power on and off. When the switch is on the mixer supplies +48V

phantom power to all channels that have XLR input jacks. Turn this switch on when using one

or more phantom-powered condenser microphones.

5. TRIM Control

Adjusts the input signal level. To get the best balance between the S/N ratio and the dynamic

range, adjust the gain so that the p lights only occasionally and briefly on the eak indicator (15)

highest input transients. The 60 to +10 scale is the MIC input adjustment range. The 40 to -

+10 scale is the line input adjustment range.

6. Low Out Switch

This switch toggles the HPF on or off. To turn the HPF on, the HPF cuts frequencies below

75Hz.

7. Signal LED Indicator

Check the input signal.

8. Equalizer

Three-band equalizer adjusts the channel's high, mid and low frequency bands. Setting the

knob to the "O" position produces a fiat response in the corresponding band. Turning the knob

to the right boosts the corresponding frequency band, while turning to the left attenuates the

band.

9. Aux Control

Monitor and effect busses (Aux sends) source their signals via a control from one or more

channels and sum these signals to a so-called bus. This bus signal is sent to an aux send

connector (for monitoring applications: Mon Out) and then routed, for example, to an active

monitor speaker or external effect device. In the latter case, the effects return can then be

brought back into the console via the aux return connectors. All monitor and effect busses are

mono, are tapped into post EQ and offer amplification of up to +15dB.

10. 1 FX Control

The aux send marked FX offers a direct route to the built in effects processor and is therefore -

post-fader and post- mute.

11. FX2 Control

The aux send marked FX offers a direct route to the built in effects processor and is therefore -

post-fader and post- mute.

12. PAN Control

The PAN control determines the position of the channel signal within the stereo image. When

working with subgroups, you can use the PAN control to assign the signal to just one output,

which gives you additional flexibility in recording situations.

13. Mute LED

The mute LED indicates a muted channel.

Product specificaties

Merk:	Power Dynamics
Categorie:	Mengpaneel
Model:	PDM-S804A
Kleur van het product:	Black, Red
Gewicht:	12000 g
Breedte:	415 mm
Diepte:	425 mm
Hoogte:	166 mm
Gebruikershandleiding:	Ja
USB-poort:	Ja
Type aansluitplug:	6,3 mm
Frequentiebereik:	10 - 45000 Hz
Aantal kanalen:	8 kanalen
Totale harmonische vervorming (THD):	0.01 procent
XLR in:	Ja
Microphone input impedance:	2000 Ohm
AC-ingangsspanning:	220-240 V
AC-ingangsfrequentie:	50-60 Hz
Stroomverbruik (typisch):	350 W
Versterker inclusief:	Ja
Digitaal geluid verwerken:	24 Bit
Aantal Euroblock-uitgangsconnectoren:	2
Maximaal uitgangsniveau (master, ongebalanceerd, L, R):	1V