Porter-Cable 4210 Handleiding

Porter-Cable Niet gecategoriseerd 4210

Lees hieronder de 📖 handleiding in het Nederlandse voor Porter-Cable 4210 (44 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 196 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/44
Part No. A24033 - 07-06-07
DOVETAIL JIG
SUPPLEMENTARY
INSTRUCTION
MANUAL
The Model and Serial No. plate is located on the main
housing of the tool. Record these numbers in the
spaces below and retain for future reference.
Model No. _____________________________________
Type __________________________________________
Serial No. ______________________________________
IMPORTANT
Please make certain that the person who
is to use this equipment carefully reads
and understands these instructions before
starting operations.
To learn more about Porter-Cable
visit our website at:
http://www.porter-cable.com
Copyright © 2005, 2007 Porter-Cable
MODELS 4210 & 4212
®
SAFETY GUIDELINES
IMPORTANT SAFETY INSTRUCTIONS
ADDITIONAL SPECIFIC SAFETY RULES
BACKGROUND INFORMATION
OPERATION
MISCELLANEOUS TECHNIQUES
THROUGH-DOVETAILS WITH CLAMPING BOARDS
THROUGH-DOVETAILS WITH UNLIMITED BOARD WIDTH
ALTERNATIVE METHOD - THROUGH-DOVETAILS WITH UNLIMITED BOARD WIDTH
HALF-BLIND DOVETAILS WITH CLAMPING BOARDS
USING A ROUTER TABLE
ALTERNATE ROUTER BITS
HALF-BLIND DOVETAIL TAILBOARDS THICKER THAN 7/8"
MITERED THROUGH-DOVETAILS
THROUGH-DOVETAIL, SKIPPED PIN METHOD
HALF-BLIND DOVETAIL, SKIPPED PIN METHOD
SAW KERF ALLOWANCE METHOD
MULTIPLE SPACER METHOD
END-TO-END JOINTS
DRAWERS WITH DOVETAIL DADOS
WOODEN HINGES
ANGLED JOINTS
ACUTE ANGLED JOINTS
SLANTED SIDE JOINTS
COMPOUND ANGLED JOINTS
INLAYED THROUGH-DOVETAILS
INLAYED HALF-BLIND DOVETAIL JOINTS
INLAYED BOX JOINTS
TABLES OF COMMONLY AVAILABLE ROUTER BIT SIZES
TROUBLESHOOTING
MAINTENANCE
SERVICE
ACCESSORIES
WARRANTY
SERVICE CENTER LOCATIONS
2
TABLE OF CONTENTS
3
3
4
4
5
5
6
8
10
11
13
14
17
18
19
20
22
24
24
25
26
29
32
33
34
37
38
40
41
42
42
42
42
43
Back Cover
3
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a potentially haz ard ous situation which, if not avoided, may result in minor or mod er ate injury.
Used without the safety alert symbol indicates potentially hazardous situation which, if not avoided, may
result in property damage.
This manual contains in for ma tion that is im por tant for you to know and un der stand. This in for ma tion re lates to pro-
tect ing YOUR SAFE TY and PRE VENT ING EQUIP MENT PROB LEMS. To help you rec og nize this in for ma tion, we use
the symbols to the left. Please read the man u al and pay at ten tion to these sections.
SAFETY GUIDELINES - DEFINITIONS
IMPORTANT SAFETY INSTRUCTIONS
Read and understand all instructions. Failure to follow all instructions listed below, may
result in electric shock, re and/or serious personal injury.
SAVE THESE INSTRUCTIONS.
Technical Service Manager
Porter-Cable Corporation
4825 Highway 45 North
Jackson, TN 38305
There are certain applications for which this tool was designed. Porter-Cable strongly recommends that this
tool NOT be modified and/or used for any application other than for which it was designed. If you have any questions relative to
its application DO NOT use the tool until you have written Porter-Cable and we have advised you.
1. KEEP WORK AREA CLEAN. Cluttered areas and benches invite injuries.
2. AVOID DANGEROUS ENVIRONMENT. Don’t expose power tools to rain. Don’t use power tools in damp or wet
locations. Keep area well lit. Avoid chemical or corrosive environment. Do not use tool in presence of flammable
liquids or gases.
3. GUARD AGAINST ELECTRIC SHOCK. Prevent body contact with grounded surfaces. For example: pipes,
radiators, ranges, refrigerator enclosures.
4. KEEP CHILDREN AWAY. Do not let visitors contact tool or extension cord. All visitors should be kept away from
work area.
5. STORE IDLE TOOLS. When not in use, tools should be stored in dry, and high or locked-up place – out of reach
of children.
6. DON’T FORCE TOOL. It will do the job better and safer at the rate for which it was intended.
7. USE RIGHT TOOL. Don’t force small tool or attachment to do the job of a heavy duty tool. Don’t use tool for
purpose not intended – for example – do not use a circular saw for cutting tree limbs or logs.
8. DRESS PROPERLY. Do not wear loose clothing or jewelry. Loose clothing, draw strings and jewelry can be
caught in moving parts. Rubber gloves and non-skid footwear are recommended when working outdoors. Wear
protective hair covering to contain long hair.
9. USE ANSI Z87.1 SAFETY GLASSES. Wear safety glasses or goggles while operating power tools. Also face or
dust mask if operation creates dust. All persons in the area where power tools are being operated should also
wear safety glasses and face or dust mask.
10. DON’T ABUSE CORD. Never carry tool by cord or yank it to disconnect from receptacle. Keep cord from heat,
oil, and sharp edges. Have damaged or worn power cord and strain reliever replaced immediately. DO NOT
ATTEMPT TO REPAIR POWER CORD.
11. SECURE WORK. Use clamps or a vise to hold work. It’s safer than using your hand and it frees both hands to
operate tool.
12. DON’T OVERREACH. Keep proper footing and balance at all times.
13. MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for better and safer performance. Follow
instructions for lubricating and changing accessories. Inspect tool cords periodically and if damaged, have
repaired by authorized service facility. Inspect extension cords periodically and replace if damaged. Have all
worn, broken or lost parts replaced immediately. Keep handles dry, clean and free from oil and grease.
14. DISCONNECT TOOLS when not in use, before servicing, and when changing accessories such as blades, bits, cutters, etc.
15. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting
wrenches are removed from the tool before turning it on.

Product specificaties

Merk: Porter-Cable
Categorie: Niet gecategoriseerd
Model: 4210

Heb je hulp nodig?

Als je hulp nodig hebt met Porter-Cable 4210 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Porter-Cable

Porter-Cable

Porter-Cable 59380 Handleiding

25 Juni 2024
Porter-Cable

Porter-Cable 59375 Handleiding

10 Juni 2023
Porter-Cable

Porter-Cable 6931 Handleiding

28 Mei 2023
Porter-Cable

Porter-Cable 59381 Handleiding

9 Mei 2023
Porter-Cable

Porter-Cable 517 Handleiding

5 Mei 2023
Porter-Cable

Porter-Cable TS056 Handleiding

19 April 2023
Porter-Cable

Porter-Cable 8931 Handleiding

19 April 2023
Porter-Cable

Porter-Cable 557 Handleiding

13 April 2023
Porter-Cable

Porter-Cable PC160JT Handleiding

25 Maart 2023
Porter-Cable

Porter-Cable 4210 Handleiding

8 Maart 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Panasonic

Panasonic NB-W250 Handleiding

25 November 2024
Alpine

Alpine CHM-S611 Handleiding

25 November 2024
AOpen

AOpen DE3650-C Handleiding

25 November 2024
Lazer

Lazer Urbanize MIPS Handleiding

25 November 2024
Symmons

Symmons Dia 353GB-24 Handleiding

25 November 2024
SoundTube

SoundTube IPD-RS62-EZ Handleiding

25 November 2024
Moen

Moen Camerist 4905 Handleiding

25 November 2024
Lazer

Lazer Cameleon DLX Handleiding

25 November 2024
DMT

DMT DLD-85 Handleiding

25 November 2024
AOpen

AOpen AM1120T Handleiding

25 November 2024