Philips Norelco Series 9000 MG7771 Handleiding
Philips
Grooming set
Norelco Series 9000 MG7771
Lees hieronder de 📖 handleiding in het Nederlandse voor Philips Norelco Series 9000 MG7771 (3 pagina's) in de categorie Grooming set. Deze handleiding was nuttig voor 3 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/3
BC
M
G
777
1
>75 % recycled paper
>75 % papier recyclé
Manufactured for: Philips Personal Health
a division of Philips North America LLC
P.O. Box 10313, Stamford, CT 06904, USA
This symbol on the product’s nameplate
means it is listed by Underwriters’
Laboratories, Inc.
Norelco is a registered trademark of Philips
North America LLC.
PHILIPS and Philips shield are registered
trademarks of Koninklijke Philips N.V.
©2022 Philips North America LLC. All rights
reserved.
3000.081.3168.2 (02/02/2022)
5/64 in.
2 mm
3/16 in.
5 mm
3/64 in.
1 mm
1/8 in.
3 mm
9/32 in.
7 mm
1/8 in – 9/32 in
3 – 7 mm
1/4 .in
6 mm
21/32 in.
16 mm
15/32 in.
12 mm
3/8 in.
9 mm
1/8 .in
3 mm
3/16 in.
5 mm
5/32 in.
4 mm
5/32 in. – 3/8 in.
4 mm – 9 mm
5
4
1
2
6
3
7
8
9
16
11
13
15
10
12
14
19
20
21
22
23 24
25
25
17
18
= mm
1
2
1
2
1
2
2
1
5
8
11
14
17
20
23
26
3
6
9
12
15
18
21
24
27
4
7
10
13
16
19
22
25
28
2 Insert the small plug into the product and
put the power plug in any 120V AC outlet
(Fig.4).
3 After charging, remove the power plug
from the wall outlet and pull the small plug
out of the product.
Note: An adapter plug may be necessary for
cord usage in some foreign countries. Use
an attachment plug adapter of the proper
conguration for the power outlet.
Quick charge
After approx. 5 minutes charging, the product
contains enough power for one cordless
trimming session.
Using the product
Note: This product is waterproof (Fig.5). It is
suitable for use in the bath or shower and for
cleaning under the tap with water. For safety
reasons, this product can only be used without
cord.
-Use this product for its intended household
use as described in this manual.
-For hygienic reasons, the product should
only be used by one person.
Note: Switch o and clean the product and
attachments after each use.
Detaching and attaching cutting elements
1 To detach a cutting element, push upwards
against the teeth of the cutting element
and take it o the handle (Fig.6).
2 To attach a cutting element, insert the lug
of the cutting element into the guiding
slot at the front and push the back of the
cutting element onto the product (‘click‘)
(Fig.7).
Detaching the nose trimmer
1 Place your nger on the arrow at the back
of the attachment and push it o the
handle in the direction of the arrow (Fig.8).
Attaching and detaching guards
1 To attach any type of guard onto a cutting
element,slide the front part of the guard
onto the teeth and push the projection
at the back of the guard into the product
(‘click‘) (Fig.9).
-If the product becomes abnormally hot or
smelly, changes color or if charging takes
longer than usual, stop using and charging
the product and contact Philips.
-Do not place products and their batteries in
microwave ovens or on induction cookers.
-Do not open, modify, pierce, damage or
dismantle the product or battery to prevent
batteries from heating up or releasing
toxic or hazardous substances. Do not
short-circuit, overcharge or reverse charge
batteries.
-If batteries are damaged or leaking, avoid
contact with the skin or eyes. If this occurs,
immediately rinse well with water and seek
medical care.
-When you handle batteries, make sure that
your hands, the product and the batteries
are dry.
-To avoid accidental short-circuiting of
batteries after removal, do not let battery
terminals come into contact with metal
objects (e.g. coins, hairpins, rings). Do not
wrap batteries in aluminum foil. Tape
battery terminals or put batteries in a
plastic bag before you discard them.
SAVE THESE
INSTRUCTIONS
Introduction
Congratulations on your purchase and
welcome to Philips Norelco!
To fully benet from the support that Philips
Norelco oers, register your product at
www.norelco.com/register.
General description (Fig. 1)
1 Extra-wide hair trimmer
2 Precision trimmer
3 Nose trimmer
4 Skin protector
5 Body groomer
6 Full-size hair trimmer
7 On/o button
8 Battery status indicator
9 Socket for small plug
10 Stubble guard 3/64in. (1mm)
11 Stubble guard 5/64in. (2mm)
12 Beard guard 1/8in. (3mm)
13 Beard guard 3/16in. (5mm)
14 Beard guard 9/32in. (7mm)
15 Adjustable beard guard 3/32in.-1/4in.
(3-7mm)
16 Eyebrow guard 1/4in. (6mm)
17 Power plug
18 Small plug
19 Hair guard 5/32in. (4mm)
20 Hair guard 3/8in. (9mm)
21 Hair guard 15/32in. (12mm)
22 Hair guard 21/32in. (16mm)
23 Fading hair guard 5/32 in.-3/8 in. (4-9 mm)
24 Fading hair guard 5/32in.-3/8in. (4-9mm)
25 Body guard 1/8in. (3mm)
26 Body guard 3/16in. (5mm)
Not shown: cleaning brush, pouch
Charging
Battery status indications
-When the battery is almost empty, the
battery status indicator lights up orange
(Fig.3).
-When the product is charging, the battery
status indicator ashes white slowly.
-During quick charge, the battery status
indicator ashes white quickly. After
approx. 5 minutes of charging, the battery
indicator ashes white slowly. The product
now contains enough power for one
cordless trimming session.
-When the battery is fully charged, the
battery status indicator lights up white
continuously.
Note: After approx. 30 minutes, the light goes
out automatically.
Charging
Charge the product before rst use and when
the display indicates that the battery is almost
empty. When the product has charged for
3hours, it has a cordless operating time of
up to 5 hours.
-Charging, recharging or using the product
at temperatures below 40°F (4.5°C) or
higher than 95°F (35°C) adversely aects
the lifespan of the battery.
-If the product is subjected to a major
change in temperature, pressure or
humidity, let the product acclimatize for
30minutes before use.
1 Make sure the product is turned o.
English
IMPORTANT
SAFETY
INSTRUCTIONS
When using an electric product, basic
precautions should always be followed,
including the following:
Read all instructions before using this
product.
DANGER
To reduce the risk of electric shock:
-Do not reach for a corded product that has
fallen into water. Unplug immediately from
the power outlet.
-Keep the power cord dry (Fig.2).
-Do not place or store the product where it
can fall or be pulled into a tub or sink. Do
not place or drop the product into water or
other liquid.
-This product does not work while it is
connected to the power outlet. Except
when charging, always unplug this product
from the power outlet.
-Remove power cord from power outlet and
product before cleaning.
WARNING
To reduce the risk of burns, re, electric
shock, or injury to persons:
-This product is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the product
by a person responsible for their safety.
Children should be supervised to ensure
that they do not play with the product.
-Use this product only for its intended
household use as described in this manual.
Misuse can lead do hazards or serious
injuries. Do not use attachments not
recommended by Philips North America LLC.
-Never operate this product if it has a
damaged power cord, if it is not working
properly, after it has been dropped or
damaged, or after the product or power
cord has been dropped into water. For
assistance call 1-800-243-3050.
-Keep the power cord away from heated
surfaces.
-Never drop or insert any object into any
opening.
-Do not use the power cord in or near a
power outlet that contains an electric air
freshener to prevent damage to the power
cord.
-Do not use product outdoors or operate
where aerosol (spray) products are being
used or where oxygen is being administered.
-Always check cutters, cutting unit and
guards before using the product. Do not
use the product if cutters, cutting unit or
guards are damaged, as injury may occur.
-Always attach power cord to product rst,
then to power outlet. To disconnect, set
all controls to ‘o‘ position. Then remove
power cord from power outlet.
-Plug power cord directly into power outlet.
Do not use an extension cord.
-Unplug power cord before plugging in or
unplugging the product.
-Only use the power cord and other
accessories supplied with the product.
-The batteries used in this product may
present a re or chemical burn hazard if
mistreated. Do not disassemble, heat above
100°C (212°F) or incinerate.
IMPORTANT: The power plug contains a
transformer. Do not cut o the power plug to
replace it with another plug as this will cause a
hazardous condition.
-Only use original Philips accessories or
consumables. Only use detachable power
cord HQ8505.
-Charge, use and store the product at a
temperature between 41 °F / 5°C and 95°F
/ 35°C.
-Keep product and batteries away from re
and do not expose them to direct sunlight
or high temperatures.
2 To detach any type of guard from the
cutting element, carefully pull its back part
o the product and then slide it o the
cutting element (Fig.10).
Note: When trimming for the rst time,
start by using the guard with the maximum
trimming length setting to familiarize
yourself with the product.
Switching the product on and o
1 Press the on/o button once to switch the
product on or o (Fig.11).
Attachments for use on beard
Full-size hair trimmer
Use the full-size hair trimmer without a guard
to trim hair close to the skin (to a length of
1/32in./0.5mm) or to create clean lines
around your beard, neck and sideburns.
1 To trim hair close to the skin, place the at
side of the cutting element against your
skin and make strokes against the direction
of hair growth (Fig.12).
2 For contouring, hold the cutting element
perpendicular to the skin and move it
upwards or downwards with gentle
pressure (Fig.13).
Beard guards
Use a beard guard to trim your beard and
mustache evenly. The product comes with
6 beard guards. The hair length settings
are indicated on the guards. The settings
correspond to the remaining hair length after
trimming.
Guard inch mm
Stubble
guard
3/64in. 1mm
Stubble
guard
5/64in. 2mm
Beard guard 1/8in. 3mm
Beard guard 3/16in. 5mm
Beard guard 9/32in. 7mm
Adjustable
beard guard
3/32in.-1/4in. 3-7mm
1 Attach the guard to the full-size hair
trimmer.
2 To trim in the most eective way, move the
guard against the direction of hair growth
(Fig.12). Make sure the surface of the
guard always stays in contact with the skin.
3 To trim with the 3/32in.-1/4in. (3-7mm)
adjustable beard guard, attach the guard to
the full-size hair trimmer and use the slide
switch on the guard to adjust the length
(Fig.14). The numbers on the guard relate
to the number of millimeters of hair length
that will remain after trimming.
Attachments for use on body
-Use the green body guards to trim body
hair.
-When you trim for the rst time, use the
3/16in./5mm body guard to familiarize
yourself with the product.
-Make sure hair is clean and dry as wet
hair tends to stick to the body and, when
trimming sensitive areas, always use a body
guard.
-Since hairs do not all grow in the same
direction, you may want to try dierent
trimming positions (i.e. upwards,
downwards, or across). Practice is best for
optimum results.
-Always make smooth and gentle
movements and be sure the surface of the
guard always stays in contact with your skin.
-When too many hairs have accumulated on
the product, blow the hairs out before use,
for best trimming results.
Body guards
Use a body guard to trim hairs below the
neckline. The product comes with 2 body
guards. The hair length settings are indicated
on the guards. The settings correspond to the
remaining hair length after trimming.
Guard inch mm
Body guard (green) 1/8in. 3mm
Body guard (green) 3/16in. 5mm
1 Attach a body guard to the full-size hair
trimmer.
2 To trim in the most eective way, stretch
the skin with your free hand and move the
guard against the direction of hair growth
(Fig.15). Make sure that the surface of the
guard always stays in contact with the skin.
Body groomer
Use the body groomer to shave hair below the
neckline such as your underarms and chest.
Only use the body groomer with the skin
protector.
1 Attach the body groomer to the product.
2 Attach the skin protector to the body
groomer (Fig.16).
3 To shave in the most eective way, stretch
the skin with your free hand and move
the groomer against the direction of hair
growth (Fig.17). Make sure the surface of
the groomer always stays in full contact
with the skin.
Attachments for use on head
Extra-wide hair trimmer
Use the extra-wide hair trimmer without a
guard to clip the hair on your head very close
to the skin (1/32in./0.5mm) or to contour the
neckline and area around the ears.
1 To contour the hairline around the ears,
comb the hair ends over the ears.
2 Tilt the product in such a way that only one
edge of the cutter blades touches the hair
ends when you shape the contours around
the ears.
3 To contour the nape of the neck or
sideburns, turn the product and make
downward strokes (Fig.18).
4 Move the product slowly and smoothly
following the natural hairline.
Hair guards
Use a hair guard to evenly trim the hairs on
your head. The product comes with 4 hair
guards. The hair length settings are indicated
on the guards. The settings correspond to the
remaining hair length after trimming.
Guard inch mm
Hair guard 5/32in. 4mm
Hair guard 3/8in. 9mm
Hair guard 15/32in. 12mm
Hair guard 21/32in. 16mm
1 Attach a guard to the extra-wide hair
trimmer.
2 Move the trimmer slowly over the crown
from dierent directions to achieve an even
result. Make sure that the surface of the
guard always stays in contact with the skin.
- Always move the trimmer against the
direction of hair growth (Fig.19).
Press lightly.
- Make overlapping passes over the head
to ensure that all hair that should be cut
has been cut.
Fading hair guard
Use the fading hair guards to trim the hair
around the ears with a faded result. The
product comes with 2 fading hair guards.
Use both guards to trim hair around both
ears. Choose a guard based on the preferred
trimming direction of back to front or front to
back. Always make sure that you hold the side
of the guard with the short teeth closest to
your ear.
Guard inch mm
Fading hair guards 5/32in.-3/8in. 4-9mm
1 Attach the guard to the extra-wide hair
trimmer to trim the hair around the ear.
Then attach the other guard to trim the hair
around the other ear.
2 Place the product on your hair at the back
or front of your ear, depending on the
trimming direction you prefer. Always make
sure that the side of the guard with the
short teeth is closest to your ear.
3 Move the trimmer slowly around the ear,
while holding it steady (Fig.20). For best
results, move the trimmer against the
direction of hair growth (back to front).
Precision attachments for use on face
Precision trimmer
Use the precision trimmer to create ne lines
and contours around your facial style, close to
the skin (to a length of 1/32in./0.5mm).
1 Hold the precision trimming head
perpendicular to the skin and move the
trimming head upwards or downwards
with gentle pressure (Fig.21).
Eyebrow guard
Use the full-size hair trimmer with
theeyebrow guard attached for tidying
eyebrows or trimming sideburns to a length of
1/4in./6mm.
1 Slowly move the trimmer against the hair
growth direction. Press lightly and make
sure that the surface of the guard always
stays in contact with the skin (Fig.22).
Nose trimmer
Use the nose trimmer to trim your nose hair
and ear hair.
-Make sure nasal passages are clean. Make
sure outer ear channels are clean and free
from wax.
-Do not insert the tip more than
3/16in./5mm.
-Always clean the attachment after each use.
Trimming nose hair
1 Gently move the tip in and out of nose
while turning it around to remove
unwanted hairs (Fig.23).
Trimming ear hair
1 Slowly move the tip round the ear to
remove hairs that stick out beyond the rim
of the ear.
2 Gently move the tip in and out of the outer
ear channel to remove unwanted hairs
(Fig.23).
Cleaning
Never use scouring pads, abrasive cleaning
agents or aggressive liquids such as
gasoline or acetone to clean the product.
Never dry the trimmer teeth with a towel
or tissue, as this may damage the trimmer
teeth.
After every use: cleaning under the tap
1 Turn o the product and disconnect it from
the power outlet.
2 Remove any guard or cutting element
(see ‘Detaching and attaching cutting
elements‘) from the product.
3 Rinse the hair chamber under a warm tap.
4 Clean the cutting element and guard under
a warm tap (Fig.24).
5 Carefully shake o excess water and let all
parts air-dry completely.
Thorough cleaning
1 Turn o the product and disconnect it from
the power outlet.
2 Clean the handle under the tap or wipe the
handle clean with a dry or moist cloth.
3 Remove any guard or cutting element
(see ‘Detaching and attaching cutting
elements‘) from the product.
4 Remove any hairs that have accumulated in
the hair chamber with the cleaning brush
supplied.
5 Remove any hairs that have accumulated
in the cutting elements and/or guards with
the cleaning brush supplied.
6 Clean the cutting elements and guards
under a warm tap (Fig.24).
7 Carefully shake o excess water and let all
parts air-dry completely.
Cleaning the nose trimmer
Clean the nose trimmer immediately after use
and when a lot of hair or dirt has accumulated
on the nose trimmer head.
1 Rinse the nose trimmer head with hot
water (Fig.25).
2 Turn on the product and rinse the nose
trimmer head once more to remove any
remaining hairs. Then turn o the product
again.
For a thorough clean, immerse the nose
trimmer head in a bowl with warm water for a
few minutes and then turn on the product to
remove stubborn hair/debris.
1 Carefully shake o excess water and let all
parts air-dry completely.
Cleaning the body groomer
1 Remove the skin protector by pulling it
upwards o the groomer (Fig.26).
2 Clean the skin protector and body groomer
under a warm tap (Fig.27).
3 Carefully shake o excess water and let
both parts air-dry completely.
4 Reattach the skin protector onto the body
groomer (Fig.16).
This product has no other user-serviceable
parts. For assistance call 1-800-243-3050.
Storage
-Store the product in the pouch supplied.
Make sure the product is dry before you
store it in the pouch.
-Be sure the product is switched o. Remove
the power cord from power outlet and
the product before storing it in a safe,
dry location where it will not be crushed,
banged, or subject to damage.
-Do not wrap cord around the product
when storing.
-Store cord and other accessories in a safe
location where these will not be cut or
damaged.
-Do not place or store the product where
it can fall or be pulled into a tub or sink,
water or other liquid while plugged in.
Assistance
For assistance, visit our website:
www.philips.com/support or call toll free
1-800-243-3050.
Online information is available 24 hours a day,
7 days a week.
Disposal
-This product contains a rechargeable
lithium-ion battery which must be
disposed of properly.
-Contact your local town or city ocials
for battery disposal information. You
can also call 1-800-822-8837 or visit
www.call2recycle.org for battery
drop-o locations (Fig.28).
-For assistance, visit our website
www.philips.com/support or call
1-800-243-3050 toll free.
-Your product is designed and
manufactured with high quality
materials and components, which can
be recycled and reused. For recycling
information, please contact your local
waste management facilities or visit
www.recycle.philips.com.
Full Five-Year Warranty
Philips North America LLC warrants this new
product (except foil, cutters and guards)
against defects in materials or workmanship
for a period of ve years from the date of
purchase, and agrees to repair or replace any
defective product without charge.
IMPORTANT: This warranty does not cover
damage resulting from accident, misuse or
abuse, lack of reasonable care, the axing of
any attachment not provided with the product
or loss of parts or subjecting the product to
any but the specied voltage or batteries.*
NO RESPONSIBILITY IS ASSUMED FOR ANY
SPECIAL, INCIDENTAL OR CONSEQUENTIAL
DAMAGES.
In order to obtain warranty service, simply go
to for assistance. www.philips.com/support
It is suggested that for your protection you
return shipments of product by insured mail,
insurance prepaid. Damage occurring during
shipment is not covered by this warranty.
NOTE: No other warranty, written or oral,
is authorized by Philips Personal Health, a
division of Philips North America LLC.
This warranty gives you specic legal rights,
and you may also have other rights which
vary from state to state. Some states do not
allow the exclusion or limitation of incidental
or consequential damages, so the above
exclusion and limitations may not apply to you.
*Read enclosed instructions carefully.
45-DAY MONEY-BACK GUARANTEE
If you are not fully satised with your product
send the product back and we’ll refund you
the full purchase price.
The product must be shipped prepaid by
insured mail, insurance prepaid, have the
original sales receipt, indicating purchase
price and date of purchase, and the money-
back guarantee return authorization form
enclosed.
We cannot be responsible for lost mail.
The product must be postmarked no later
than 45 days after the date of purchase. Philips
reserves the right to verify the purchase price
of the product and limit refunds not to exceed
suggested retail price.
To obtain the money-back
guarantee service, please go to
www.PhilipsMoneyBack.com and
follow the simple 3-step process.
Delivery of refund check will occur
6–8weeks after receipt of returned
product.
Product specificaties
| Merk: | Philips |
| Categorie: | Grooming set |
| Model: | Norelco Series 9000 MG7771 |
Heb je hulp nodig?
Als je hulp nodig hebt met Philips Norelco Series 9000 MG7771 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Grooming set Philips
12 Maart 2025
12 Maart 2025
12 Maart 2025
12 Maart 2025
7 Februari 2025
7 Februari 2025
7 Februari 2025
7 Februari 2025
20 Juni 2023
23 Mei 2023
Handleiding Grooming set
- Grooming set Braun
- Grooming set AEG
- Grooming set BaByliss
- Grooming set Princess
- Grooming set Remington
- Grooming set Wahl
- Grooming set Jata
- Grooming set Izzy
- Grooming set OBH Nordica
- Grooming set Carmen
- Grooming set Conair
Nieuwste handleidingen voor Grooming set
5 November 2024
11 September 2024
11 September 2024
11 September 2024
11 September 2024
29 Mei 2024
29 Mei 2024
29 Mei 2024
29 Mei 2024
3 Mei 2024