Philips AVENT SCD278 Handleiding

Philips Baby product AVENT SCD278

Lees hieronder de 📖 handleiding in het Nederlandse voor Philips AVENT SCD278 (17 pagina's) in de categorie Baby product. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/17

€

Tlf.

무료 전화:



데우기 전의 모유/분유 온도.

분



Please take 5 minutes to read through the whole

of this leaflet before you use your Electric Bottle

and Baby Food Warmer for the first time and

retain for future reference.

The Electric Bottle and Baby Food Warmer allows you

to warm all AVENT Feeding Bottles as well as baby

food jars and tins safely and quickly. The Electric Bottle

and Baby Food Warmer isn’t meant for keeping liquid

or food warm as vitamins can be destroyed.

The speed at which the warmer heats the milk or

food depends on the size of the bottle or container

and the starting temperature of the milk or food

(e.g. room temperature 0°C or out of fridge 5°C).

Diagram  gives an indication of approximate

warming time. Always test the temperature before

feeding.

The following guidelines are the approximate

temperature the water* surrounding the

container can reach. This is not a heating guide

for liquid or food!

Contents

a) Basket

b) Warmer body

c) Dial

d) Baby food container

Instructions for Use

For AVENT Feeding Bottles

1) Ensure basket is in place inside the warmer.

) Place the assembled, filled bottle in the warmer.

) For 15ml/4oz Bottles, fill the warmer with water

to just above the level of milk in the bottle.

4) For larger AVENT Bottles (60ml/9oz), fill the

warmer to 15mm (1/ inch) below the rim of

the warmer.

5) Never let the water level rise above the neck of

the bottle or spill over the edge of the warmer.

6) Plug in the unit and switch on at the mains.

Turn the dial to setting .

7) The light will illuminate to indicate the warmer

is working.

8) During the warming process, the light will come

on and off to indicate that the water surrounding

the bottle is being heated to the maximum

temperature of the setting.

9) Always test the feed and when it has reached

the required temperature, remove immediately.

10) Shake the bottle gently and check the temperature

of the milk by sprinkling a few drops on to your

wrist before you feed your baby.

11) Take care not to overheat the milk.

NB: please refer to the timings in Diagram 2.

NB: The basket can be removed when heating the

AVENT Magic Cup and other makes of bottles.

For baby food jars and tins

1) Ensure basket is in place inside the warmer.

) Remove the lid and place jar or tin in the warmer.

) Fill the warmer with water to 15 mm (1/ inch)

below the top of the jar/tin.

4) Plug in the unit and switch on at the mains.

Turn the dial to setting .

5) Continue as 7-9 above.

6) The warmer will work in the same way as for

feeding bottles. Take care when removing the jar

or tin as they, and the water surrounding them,

will be hot.

7) For small jars/tins you may find it beneficial

to place a screw ring from an AVENT Bottle below

the jar/tin before adding the water in order to

remove the container easily.

8) Stir the food and test it on a spoon yourself

to ensure it is not too hot for your baby.

9) Take care not to overheat the feed.

NB: please refer to the timings in Diagram 2.

Care of your warmer

Unplug and allow to cool before cleaning. Remove

basket and wipe inside and outside with a damp cloth

only, this will keep the warmer looking new. DO NOT

USE AN ABRASIVE CLEANER. It may be advantageous

to use pre-boiled or filtered water in your warmer in

order to reduce limescale build up.

De-scaling

You should de-scale your Electric Bottle and Baby Food

Warmer every four weeks to ensure it continues to

work 100 % effectively.

EITHER:

Mix one sachet of citric acid (10g) with 00ml/7oz

of water. Ensure basket is in place and pour solution

into warmer. Heat for 10 minutes on setting . After

10 minutes, switch off by unplugging from the wall

and leave to stand for 0 minutes. Pour the solution

away and rinse the warmer with tap water. Citric acid

is available from most chemists and through Philips

AVENT Customer Service.

Pour 50ml/oz of vinegar (white) mixed with

100ml/4oz of cold water into the warmer (with

basket in place). Allow to stand in the unit until

any limescale has dissolved. Empty the unit and

rinse thoroughly.

Warning!

The Electric Bottle and Baby Food Warmer is fitted

with a non-rewireable moulded plug. The mains

supply cord of the appliance CANNOT be replaced.

If the cord is damaged, the appliance should

be discarded.

The lead supplied must not be used on any other

appliance and no other lead should be used with the

Electric Bottle and Baby Food Warmer.

This product is manufactured to comply with

the Radio Interference Requirements and the

EEC Directive 89/6/EEC.

• When in use the warmer contains hot water.

• Always place container into warmer before

adding water.

• Ensure water has been added before

switching the unit on.

• If the feed is left in the warmer, the temperature

will continue to increase as the thermostat cuts

in/out whilst connected to the electric mains.

• Always test the feed and when it has reached

the required temperature, remove immediately.

• Always unplug from the socket after each

use to switch the bottle warmer off.

• NEVER IMMERSE IN WATER.

• This appliance is intended for use by responsible

persons, keep out of the reach of small children

and the infirm.

• This appliance is not intended for use by persons

(including children) with reduced physical, sensory

or mental capabilities, or lack of experience

or knowledge, unless they have been given

supervision or instruction concerning use of the

appliance by a person responsible for their safety.

• Children should be supervised to ensure that they

do not play with the appliance.

For your child’s safety and health Warning!

Before first use, clean the product. Dishwasher safe.

Sterilise using a Philips AVENT Steam Steriliser or boil

for 5 minutes. Before each use, inspect the product.

Throw away at the first sign of damage or weakness.

Do not leave in sunlight when not in use or for longer

than recommended in heat or sterilising solution,

as this may weaken the product. Always use this

product with adult supervision. Always check food

temperature before feeding.

Guarantee

Philips AVENT guarantees that should the Electric

Bottle and Baby Food Warmer become faulty during

twelve months from the date of purchase, it will be

replaced free of charge during this time. Please return

it to the retailer where it was purchased. Please keep

your receipt as a proof of purchase, together with a

note of when and where purchased. For the guarantee

to be valid, please note:

• The Electric Bottle and Baby Food Warmer must

be used according to the instructions in this leaflet

and connected to a suitable electricity supply.

• The claim must not be a result of accident,

misuse, dirt, neglect or fair wear and tear.

This does not affect your statutory rights.

Philips AVENT is here to help

GB:

Call FREE on

0800 289 064

IRL:

Call FREE on

1800 509 021

AU: 1 300 364 474

www.philips.com/AVENT

Philips AVENT Electric Bottle and Baby Food Warmer

Setting Approximate water* temperature

surrounding the container

1 5 – 45 °C

 45 – 75 °C

 75 – 85 °C

EN EN

Product specificaties

Merk:	Philips
Categorie:	Baby product
Model:	AVENT SCD278
Kleur van het product:	Blue, Transparent, White
Land van herkomst:	Verenigd Koninkrijk
Natuurlijke zuigfles (125 ml / 4 oz):	2 stuk(s)
Natuurlijke zuigfles (260 ml / 9 oz):	4 stuk(s)
Flessenborstel:	1 stuk(s)
Fopspeen voor pasgeborenen:	2 stuk(s)