PCE Instruments PCE-FOT 10 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor PCE Instruments PCE-FOT 10 (9 pagina's) in de categorie Thermometer. Deze handleiding was nuttig voor 9 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/9
© PCE Instruments
Food / Hygiene Thermometer PCE-FOT 10
User Manual
User manuals in various languages (français,
italiano, español, português, nederlands, türk, polski,
русский,
) can be found by using our
product search on: www.pce-instruments.com
Last change: 26 July 2018
v1.0
English
© PCE Instruments
Contents
1 Safety notes ........................................................................................... 1
2 Technical specications 2 ......................................................................
3 Interpretation of the measured values ................................................ 2
4 Device description ................................................................................ 3
5 Measurement ......................................................................................... 4
6 Settings / conguration mode ............................................................. 4
7 Advanced alarm settings 5 .....................................................................
8 Calibration 5 .............................................................................................
9 . 6 Contact ................................................................................................
10 Disposal ................................................................................................. 6
© PCE Instruments
1
1 Safety notes
Please read this manual carefully and completely before you use the device for the rst time. The
device may only be used by qualied personnel and repaired by PCE Instruments personnel.
Damage or injuries caused by non-observance of the manual are excluded from our liability and
not covered by our warranty.
The device must only be used as described in this instruction manual. If used otherwise,
this can cause dangerous situations for the user and damage to the meter.
The instrument may only be used if the environmental conditions (temperature, relative
humidity, …) are within the ranges stated in the technical specications. Do not expose
the device to extreme temperatures, direct sunlight, extreme humidity or moisture. The
device is intended for indoor use.
Before the measurement, the device should have stabilis ambient temperatureed at ,
which is important when moving from cold to warm rooms and vice versa.
Do not expose the device to shocks or strong vibrations.
The case should only be opened by qualied PCE Instruments personnel.
Before making a measurement, make sure the device is entirely closed.
Never use the instrument when your hands are wet.
You must not make any technical changes to the device.
The appliance should be cleaned with a damp cloth after each use. Use only pH-neutral
cleaner, no abrasives or solvents.
The device must only be used with accessories from PCE Instruments or equivalent.
When the frying oil tester is not used for a longer period of time, remove the batteries.
Do not store the meter together with any chemicals.
Before each use, inspect the case for visible damage. If any damage is visible, do not
use the device.
Wear your personal protective equipment during each measurement to avoid injury.
This also applies to other people near the measuring location as oil splashes can cause
serious injury to human skin and eyes.
To avoid burns, never touch the sensor or the metal shaft directly after the
measurement as these parts can become very hot when they are immersed into hot
oil.
Remove the oil quality meter from the oil when you leave the place.
Do not use the instrument in explosive atmospheres. Also avoid proximity to explosive,
easily ammable or chemical substances when the sensor is hot.
Only use the device in systems that are electrically tested on a regular basis. Never
connect the conductive metal parts of the meter with a source of voltage. Inspect the
system visually before each measurement. If there are any signs of damage, do not
carry out any measurements until the problem has been resolved.
The measurement range as stated in the specications must not be exceeded under
any circumstances.
Non-observance of the safety notes can cause damage to the device and injuries to
the user.
We do not assume liability for printing errors or any other mistakes in this manual.
We expressly point to our general guarantee terms which can be found in our general terms of
business.
If you have any questions please contact PCE Instruments. The contact details can be found at
the end of this manual.


Product specificaties

Merk: PCE Instruments
Categorie: Thermometer
Model: PCE-FOT 10

Heb je hulp nodig?

Als je hulp nodig hebt met PCE Instruments PCE-FOT 10 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Thermometer PCE Instruments

Handleiding Thermometer

Nieuwste handleidingen voor Thermometer

Owon

Owon TI219 Handleiding

21 December 2024
TFA

TFA 12.1004 Handleiding

21 December 2024
Optex

Optex PT-U80 Handleiding

16 December 2024
Optex

Optex PT-7LD Handleiding

16 December 2024
Ebro

Ebro TFI 260 Handleiding

15 December 2024
Ebro

Ebro TFI 54 Handleiding

15 December 2024
EMOS

EMOS E0522 Handleiding

13 December 2024
Senseca

Senseca PRO 111 Handleiding

11 December 2024