Ozito SGP-5000 Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito SGP-5000 (6 pagina's) in de categorie Verfspuit. Deze handleiding was nuttig voor 35 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/6
1
SPRAY
GUN
500W
INSTRUCTION MANUAL
SPECIFICATIONS
Voltage: 220-240V ~ 50Hz
Power: 500W
Max. Flow Rate: 550ml/min
Max Viscosity: 60 DIN-sec
Container Capacity: 1000ml
Nozzle: ø2.0 / ø2.5mm
Weight: 1.45kg
WHAT’S IN THE BOX
Spray Gun
Cleaning Needle & Brush
Paint Pot & Needle Tool
2 x Nozzles
Viscosity Cup
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
SGP-5000
0117
1 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 12 months from the
original date of purchase and is intended for DIY (Do It Yourself)
use only. If a product is defective it will be replaced in accordance
with the terms of this warranty. Warranty excludes consumable
parts, for example: viscosity cup, cleaning needle, nozzle, paint pot.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other than
that specified on the tool.
• If the tool shows signs of damage or defects caused by or
resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
1
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1 Nozzle
2 Air Cap
3 Paint Head
4 On/Off Trigger
5 Spray Regulator Dial
6 Paint Pot
7 Locking Lever
8 Soft Grip Handle
9 Spray Gun Body
10Airlter
SPRAY GUN
KNOW YOUR PRODUCT
1 2 3 4 5
6 7
11 12 13 14 15 16
8 9 10
1. ASSEMBLY
11 Cleaning Needle
12 Cleaning Brush
13 Viscosity Cup
14 Nozzles x 2
15 Paint Pot Lid
16 Fluid Needle Removal Tool
ACCESSORIES
SETUP & PREPARATION
1 Insert the paint head into the gun body by aligning the
arrows on the neck of the paint head and body.
Note: Ensure the locking lever is rotated out of the way to
avoid damaging the locking lever.
1 When spraying horizontal
or low objects turn the
suction tube to the front.
3 Rotate the locking lever
forward to secure the paint
head.
2 Rotate the paint head
clockwise into the correct
orientation.
2 When spraying overhead
objects turn the suction
tube to the back.
Inserting the Paint Head
Aligning the Suction Tube
WARNING! ENSURE THE TOOL IS DISCONNECTED FROM
THE POWER SUPPLY BEFORE PERFORMING ANY OF THE
FOLLOWING OPERATIONS.
3. CONTROLS
OPERATION
2. PREPARATION
1 Before pouring any paint
or thinners, work out how
much of each substance is
needed.
1 Submerge the viscosity
cupintothematerialtoll.
3 Time how long it takes to empty the cup. This is referred to
as DIN seconds.
Thinning is particularly important when spraying. Most paints
are supplied ready for brush application and need to be diluted
sufcientlyforsprayingpurposes.
Note: Water based paints can be thinned using water.
Follow the manufacturers guide for thinning ratios which
should be labelled on the paint container.
It is vital to determine the viscosity of the coating material to
see if it is suitable to be used in the spray gun.
2 Pour the required paint
andthinnersusingalter
into a mixing cup and mix
thoroughly.
2 Raise the cup out of the
material and start timing.
4 If the material is above 60 DIN-sec the material will need to
be thinned more and retested.
Thinning
Determining Viscosity
NOTE: FOR BEST RESULTS, SURFACE PREPARATION AND PAINT
THINNING ARE THE TWO MOST IMPORTANT AREAS. ENSURE
ALL SURFACES ARE FREE OF DUST, DIRT AND GREASE.
IMPORTANT! THE SPRAY GUN CANNOT BE USED WITH
MATERIALS CONTAINING ABRASIVE SUBSTANCES, GLAZES,
DISPERSION PAINTS, CAUSTIC AND ALKALINE SUBSTANCES,
TEXTURED COATINGS OR TOXIC SPRAYS.
1 Squeeze the on/off trigger
to start spraying.
1 Squeeze the trigger
while aiming at a piece of
cardboard or scrap.
1 Removetheltercoverby
removing the 4 screws with
a screwdriver.
3 Securetheltercoverbackontothespraygunwiththe4
screws.
The regulator dial is a stop that limits the distance the trigger
can be pressed. This results in less material being sprayed.
2 Release the on/off trigger
to stop spraying.
2 Rotate the regulator dial
to the required position for
optimal results.
2 Wash or replace the dirty
lterandplaceinsidethe
inner cover.
On/Off Trigger
Spray Regulator Dial
Replacing Air Filter
CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK,
A RESIDUAL CURRENT DEVICE (RATED 30MA OR LESS)
MUST BE USED.
PAINT
THINNERS
PAINT
THINNERS
WARNING! NEVER OPERATE THE SPRAY GUN WITHOUT
A FILTER. DIRT COULD BE SUCKED IN AND DAMAGE THE
OPERATION OF THE UNIT.
Product specificaties
| Merk: | Ozito |
| Categorie: | Verfspuit |
| Model: | SGP-5000 |
Heb je hulp nodig?
Als je hulp nodig hebt met Ozito SGP-5000 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Verfspuit Ozito
16 Maart 2024
23 Mei 2023
4 Mei 2023
3 April 2023
29 Maart 2023
8 Maart 2023
24 Februari 2023
2 Februari 2023
15 November 2022
14 November 2022
Handleiding Verfspuit
- Verfspuit Bort
- Verfspuit Deco
- Verfspuit Defort
- Verfspuit Easymaxx
- Verfspuit Einhell
- Verfspuit Elektra Beckum
- Verfspuit Ferm
- Verfspuit Holzmann
- Verfspuit Magnum
- Verfspuit Metabo
- Verfspuit Paintmaxx
- Verfspuit Parkside
- Verfspuit Pattfield
- Verfspuit Powerplus
- Verfspuit Silverline
- Verfspuit Wagner
- Verfspuit Westfalia
- Verfspuit Worx
- Verfspuit Jocca
- Verfspuit 3M
- Verfspuit Black And Decker
- Verfspuit Cocraft
- Verfspuit Meec Tools
- Verfspuit Aerotec
- Verfspuit Cotech
- Verfspuit Power Craft
- Verfspuit Truper
- Verfspuit Fieldmann
- Verfspuit Sun Joe
- Verfspuit Probuilder
- Verfspuit MSW
- Verfspuit Birchmeier
- Verfspuit Yato
- Verfspuit Abac
- Verfspuit Meister Craft
- Verfspuit Wagner SprayTech
- Verfspuit Chapin
- Verfspuit XU1
Nieuwste handleidingen voor Verfspuit
5 November 2024
15 Oktober 2024
15 Oktober 2024
27 Augustus 2024
27 Augustus 2024
27 Augustus 2024
27 Augustus 2024
7 Augustus 2024
7 Augustus 2024
7 Mei 2024