Worx WX020 Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Worx WX020 (16 pagina's) in de categorie Verfspuit. Deze handleiding was nuttig voor 9 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/16
WX020
WX020.X
20V Cordless Brushless
Paint Sprayer
SAFETY AND OPERATING MANUAL
ORIGINAL INSTRUCTIONS
2
20V Cordless Brushless
Paint Sprayer WX020
WX020.X
TABLE OF CONTENTS
1. SAFETY INSTRUCTIONS
2. COMPONENT LIST
3. TECHNICAL DATA
4. NOISE INFORMATION
5. VIBRATION INFORMATION
6. CONTROLS AND FUNCTIONS
7. INTENDED USE
8. OPERATING INSTRUCTIONS
9. NOZZLE AND PRESSURE SELECTION
10. CLEANING
11. STORAGE
12. TROUBLESHOOTING
13. DECLARATION OF CONFORMITY
1. SAFETY INSTRUCTIONS
PRODUCT SAFETY
GENERAL SAFETY
WARNINGS
WARNING Read all safety warnings,
MRWXVYGXMSRWMPPYWXVEXMSRWERHWTIGMƼGEXMSRW
provided with this power tool.
Failure to follow
all instructions listed below may result in electric
WLSGOƼVIERHSVWIVMSYWMRNYV]
Save all warnings and instructions for future
reference.
The term “power tool” in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or
dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
ƽEQQEFPIPMUYMHWKEWIWSVHYWX
Power tools
create sparks which may ignite the dust or
fumes.
c) Keep children and bystanders away while
operating a power tool.
Distractions can cause
you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools.
9RQSHMƼIHTPYKWERHQEXGLMRKSYXPIXW
will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges
and refrigerators.
There is an increased risk
of electric shock if your body is earthed or
grounded.
c) Do not expose power tools to rain or wet
conditions.
Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts.
Damaged or entangled cords
increase the risk of electric shock.
e) When operating a power tool outdoors, use an
extension cord suitable for outdoor use.
Use of
a cord suitable for outdoor use reduces the risk
of electric shock.
f) If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply.
Use of an RCD reduces
the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired
SVYRHIVXLIMRƽYIRGISJHVYKWEPGSLSPSV
medication.
A moment of inattention while
operating power tools may result in serious
TIVWSREPMRNYV]
F 9WITIVWSREPTVSXIGXMZIIUYMTQIRX%P[E]W
wear eye protection.
Protective equipment
such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate
GSRHMXMSRW[MPPVIHYGITIVWSREPMRNYVMIW
c) Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking
up or carrying the tool.
Carrying power tools
[MXL]SYVƼRKIVSRXLIW[MXGLSVIRIVKMWMRK
power tools that have the switch on invites
accidents.
d) Remove any adjusting key or wrench before
turning the power tool on.
A wrench or a key left
attached to a rotating part of the power tool may
VIWYPXMRTIVWSREPMRNYV]
e) Do not overreach. Keep proper footing and
balance at all times.
This enables better control
of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing or
jewellery. Keep your hair and clothing away
from moving parts.
0SSWIGPSXLIWNI[IPPIV]SV
long hair can be caught in moving parts.
g) If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used.
Use of
dust collection can reduce dust-related hazards.
L (SRSXPIXJEQMPMEVMX]KEMRIHJVSQJVIUYIRXYWI
of tools allow you to become complacent and
ignore tool safety principles.
A careless action
GERGEYWIWIZIVIMRNYV][MXLMREJVEGXMSRSJE
second.
3
20V Cordless Brushless
Paint Sprayer WX020
WX020.X
4) Power tool use and care
a) Do not force the power tool. Use the correct
power tool for your application.
The correct
TS[IVXSSP[MPPHSXLINSFFIXXIVERHWEJIVEXXLI
rate for which it was designed.
b) Do not use the power tool if the switch does not
turn it on and off.
Any power tool that cannot
be controlled with the switch is dangerous and
must be repaired.
c) Disconnect the plug from the power source
and/or remove the battery pack, if detachable,
from the power tool before making any
adjustments, changing accessories, or storing
power tools.
Such preventive safety measures
reduce the risk of starting the power tool
accidentally.
d) Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions
to operate the power tool.
Power tools are
dangerous in the hands of untrained users.
e) Maintain power tools and accessories. Check
for misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tool’s operation. If
damaged, have the power tool repaired before
use.
Many accidents are caused by poorly
maintained power tools.
f) Keep cutting tools sharp and clean.
Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
g) Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions and
the work to be performed.
Use of the power tool
for operations different from those intended
could result in a hazardous situation.
h) Keep handles and grasping surfaces dry, clean
and free from oil and grease.
Slippery handles
and grasping surfaces do not allow for safe
handling and control of the tool in unexpected
situations.
5) Battery tool use and care
E 6IGLEVKISRP][MXLXLIGLEVKIVWTIGMƼIHF]
the manufacturer.
A charger that is suitable for
SRIX]TISJFEXXIV]TEGOQE]GVIEXIEVMWOSJƼVI
when used with another battery pack.
F 9WITS[IVXSSPWSRP][MXLWTIGMƼGEPP]
designated battery packs.
Use of any other
FEXXIV]TEGOWQE]GVIEXIEVMWOSJMRNYV]ERHƼVI
c) When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects, that can make a connection from
one terminal to another.
Shorting the battery
XIVQMREPWXSKIXLIVQE]GEYWIFYVRWSVEƼVI
H 9RHIVEFYWMZIGSRHMXMSRWPMUYMHQE]FI
ejected from the battery; avoid contact. If
GSRXEGXEGGMHIRXEPP]SGGYVWƽYWL[MXL[EXIV-J
PMUYMHGSRXEGXWI]IWEHHMXMSREPP]WIIOQIHMGEP
help.
0MUYMHINIGXIHJVSQXLIFEXXIV]QE]GEYWI
irritation or burns.
e) Do not use a battery pack or tool that is
HEQEKIHSVQSHMƼIH
(EQEKIHSVQSHMƼIH
batteries may exhibit unpredictable behaviour
VIWYPXMRKMRƼVII\TPSWMSRSVVMWOSJMRNYV]
J (SRSXI\TSWIEFEXXIV]TEGOSVXSSPXSƼVI
or excessive temperature.
)\TSWYVIXSƼVISV
temperature above 130 °C may cause explosion.
g) Follow all charging instructions and do not
charge the battery pack or tool outside
XLIXIQTIVEXYVIVERKIWTIGMƼIHMRXLI
instructions.
Charging improperly or at
XIQTIVEXYVIWSYXWMHIXLIWTIGMƼIHVERKIQE]
HEQEKIXLIFEXXIV]ERHMRGVIEWIXLIVMWOSJƼVI
6) Service
E ,EZI]SYVTS[IVXSSPWIVZMGIHF]EUYEPMƼIH
repair person using only identical replacement
parts.
This will ensure that the safety of the
power tool is maintained.
b) Never service damaged battery packs.
Service
of battery packs should only be performed
by the manufacturer or authorized service
providers.
SPRAY GUN SAFETY
WARNINGS
1. Know your sprayer.
Read and understand the
operator’s manual and observe the warnings
ERHMRWXVYGXMSRPEFIPWEƾ\IHXSXLIXSSP
2. Do not use commercial grade chemicals
or chemicals for commercial or industrial
purposes.
Use only consumer grade water-
based lawn and garden chemicals.
(SRSXTSYVLSXSVFSMPMRKPMUYMHWMRXSXLIXERO
These can weaken or damage the hose or tank.
4. Do not use caustic (alkali) self-heating or
GSVVSWMZIEGMHPMUYMHWMRXLMWWTVE]IV
These
can corrode metal parts or weaken the tank and
hose.
5. Know the contents of the chemical being
sprayed. Read all Material Safety Data Sheets
(MSDS) and container labels provided with the
chemical.
Follow the chemical manufacturer’s
safety instructions.
6. Do not attempt to modify this product or create
accessories not recommended for use with this
product.
%R]WYGLEPXIVEXMSRSVQSHMƼGEXMSR
is misuse and could result in a hazardous
condition leading to possible serious personal
MRNYV]
(SRSXWTVE]ƽEQQEFPIQEXIVMEPERHER]
material where the hazard is not known.
Product specificaties
| Merk: | Worx |
| Categorie: | Verfspuit |
| Model: | WX020 |
Heb je hulp nodig?
Als je hulp nodig hebt met Worx WX020 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Verfspuit Worx
5 November 2024
4 Mei 2024
Handleiding Verfspuit
- Verfspuit Bort
- Verfspuit Deco
- Verfspuit Defort
- Verfspuit Easymaxx
- Verfspuit Einhell
- Verfspuit Elektra Beckum
- Verfspuit Ferm
- Verfspuit Holzmann
- Verfspuit Magnum
- Verfspuit Metabo
- Verfspuit Paintmaxx
- Verfspuit Parkside
- Verfspuit Pattfield
- Verfspuit Powerplus
- Verfspuit Silverline
- Verfspuit Wagner
- Verfspuit Westfalia
- Verfspuit Jocca
- Verfspuit Ozito
- Verfspuit 3M
- Verfspuit Black And Decker
- Verfspuit Cocraft
- Verfspuit Meec Tools
- Verfspuit Aerotec
- Verfspuit Cotech
- Verfspuit Power Craft
- Verfspuit Truper
- Verfspuit Fieldmann
- Verfspuit Sun Joe
- Verfspuit Probuilder
- Verfspuit MSW
- Verfspuit Birchmeier
- Verfspuit Yato
- Verfspuit Abac
- Verfspuit Meister Craft
- Verfspuit Wagner SprayTech
- Verfspuit Chapin
- Verfspuit XU1
Nieuwste handleidingen voor Verfspuit
15 Oktober 2024
15 Oktober 2024
27 Augustus 2024
27 Augustus 2024
27 Augustus 2024
27 Augustus 2024
7 Augustus 2024
7 Augustus 2024
7 Mei 2024
3 April 2024