Ozito PXOSGK-250 Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito PXOSGK-250 (12 pagina's) in de categorie Verfspuit. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/12
STANDARD EQUIPMENT
PXOSGS-018
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 18V
Max. Flow Rate: 600ml/min
Max. Viscosity: 50DIN-s
Pot Capacity: 1L
Nozzle Sizes: Ø1.5, Ø1.8, Ø2.2mm
Weight: 1.1kg
ozito.com.au
0821
Cordless Outdoor Spray Gun
Viscosity Measuring Cup,
Cleaning Needle, & Cleaning
Brush
Splash Proof Battery Cover
3 x Spray Nozzles, Spare
Deector Ring
CORDLESS
OUTDOOR
SPRAY GUN
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specied
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts.
OZITO INDUSTRIES PTY. LTD. 25 Fox Drive, Dandenong South, Victoria, Australia 3175.
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
Installing The Battery Pack
1. Slide the battery into the tool
base until it clicks into place.
Removing The Battery Pack
1. Hold down the battery release
button.
2. Slide the battery out.
Covering The Battery
A Splash Proof Battery Cover has been provided with this unit to prevent
paint splatters from marking up your battery.
1. Slide the Battery Cover over the
attached battery.
2. Pull the drawstring taut to secure
it.
1. 1L Paint Pot
2. Spray Pattern Adjustor
3. Spray Width Deector
4. Detachable Spray Head
5. Spray Head Locking Knob
6. Spray Gun
7. Battery Seating
8. Flow Regulator Dial
9. On/Off Trigger
10. Suction Tube
11. Ø1.5mm Nozzle (White)
12. Ø1.8mm Nozzle (Black)
13. Ø2.2mm Nozzle (Red)
14. Spare Deector Ring
15. Splash Proof Battery Cover
16. Viscosity Measuring Cup
17. Cleaning Brush
18. Cleaning Needle
This tool is compatible with all batteries & chargers from the Ozito Power X Change
range.
CORDLESS OUTDOOR SPRAY GUN
ACCESSORIES
BATTERY & CHARGER
KNOW YOUR PRODUCT
1. FITTING THE BATTERY
SETUP & PREPARATION
2
1
356
4
18
7
10
9
8
17
11 12 13 14
16 15
WARNING! ENSURE THE BATTERY COVER IS USED
WITH THE PAINT SPRAYER AT ALL TIMES.
Attaching The Spray Head
1. Press the Spray Head Locking
Knob and turn it anti-clockwise to
the unlocked position.
Note: Ensure the Spray Head and Spray Gun body are aligned correctly for
proper tting.
2. Insert the Spray Head fully into
the Spray Gun.
3. Press the Spray Head Locking
Knob and turn it clockwise to
the locked position to secure the
Spray Head in position.
Aligning The Suction Tube
1. When spraying horizontal or low
objects, turn the Suction Tube so
that the opening faces forwards.
2. When spraying overhead objects,
turn the Suction Tube so that the
opening faces backwards.
2. ASSEMBLY 3. PAINT PREPARATION
Determining Viscosity
It is vital to determine the viscosity of the spray material to see if it is
suitable to be used in the spray gun.
Note: You will need to have a timer or stopwatch to perform this step.
1. Stir the material to make sure it’s evenly mixed. If bubbles are formed
during stirring, wait until these have dissipated before proceeding to the
next step.
2. Submerge the viscosity
measuring cup into the material
and ll it to the brim.
2. Raise the cup out of the liquid by
the handle and start the timer.
3. Time how long it takes to empty
the cup in seconds.
Note: The viscosity is measured
in DIN-seconds (DIN-s), so if it
takes 30 seconds for the liquid to
drain out of the measuring cup, the
material has a viscosity of 30DIN-s.
4. If the material is above 50DIN-s, the material will need to be thinned out
more and re-measured.
WARNING! THE SPRAY GUN CANNOT BE USED
WITH MATERIALS CONTAINING ABRASIVE
SUBSTANCES, GLAZES, DISPERSION PAINTS,
CAUSTIC AND ALKALINE SUBSTANCES, OR
TEXTURED COATINGS.
WARNING! ENSURE THE TOOL IS SWITCHED
OFF AND THE BATTERY IS REMOVED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
WARNING! FOR BEST RESULTS, SURFACE
PREPARATION AND PAINT THINNING SHOULD BE
PERFORMED. ENSURE ALL SURFACES ARE FREE OF
DUST, DIRT, & GREASE.
WARNING! PAINTING CAN BE A MESSY TASK.
WEAR SUITABLE CLOTHING AND ENSURE THE
SURROUNDINGS ARE PROPERLY COVERED
AND PROTECTED. USE OF A DROPSHEET IS
RECOMMENDED WITH THE SPRAYER.
Product specificaties
| Merk: | Ozito |
| Categorie: | Verfspuit |
| Model: | PXOSGK-250 |
Heb je hulp nodig?
Als je hulp nodig hebt met Ozito PXOSGK-250 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Verfspuit Ozito
16 November 2024
16 Maart 2024
23 Mei 2023
4 Mei 2023
3 April 2023
29 Maart 2023
8 Maart 2023
24 Februari 2023
2 Februari 2023
15 November 2022
Handleiding Verfspuit
- Verfspuit Bort
- Verfspuit Deco
- Verfspuit Defort
- Verfspuit Easymaxx
- Verfspuit Einhell
- Verfspuit Elektra Beckum
- Verfspuit Ferm
- Verfspuit Holzmann
- Verfspuit Magnum
- Verfspuit Metabo
- Verfspuit Paintmaxx
- Verfspuit Parkside
- Verfspuit Pattfield
- Verfspuit Powerplus
- Verfspuit Silverline
- Verfspuit Wagner
- Verfspuit Westfalia
- Verfspuit Worx
- Verfspuit Jocca
- Verfspuit 3M
- Verfspuit Black And Decker
- Verfspuit Cocraft
- Verfspuit Meec Tools
- Verfspuit Aerotec
- Verfspuit Cotech
- Verfspuit Power Craft
- Verfspuit Truper
- Verfspuit Fieldmann
- Verfspuit Sun Joe
- Verfspuit Probuilder
- Verfspuit MSW
- Verfspuit Birchmeier
- Verfspuit Yato
- Verfspuit Aqua Joe
- Verfspuit Abac
- Verfspuit Meister Craft
- Verfspuit Wagner SprayTech
- Verfspuit Chapin
- Verfspuit XU1
Nieuwste handleidingen voor Verfspuit
16 November 2024
15 November 2024
5 November 2024
15 Oktober 2024
15 Oktober 2024
27 Augustus 2024
27 Augustus 2024
27 Augustus 2024
27 Augustus 2024
7 Augustus 2024