Ozito RSH-2535 Handleiding

Ozito Niet gecategoriseerd RSH-2535

Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito RSH-2535 (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/8
RAPID
SHREDDER
2400W
INSTRUCTION MANUAL
SPECIFICATIONS
Power Rating: 2400W (S6 40%), 2000W (S1)
No Load Speed: 3,800/min
Max Cutting: 35mmØ
Noise Level: 106 dB
Blades: Reversible
Collection Bag: 45 litre
Protection Class: II (Double Insulated)
Weight: 10.3 kg
RSH-2535
STANDARD EQUIPMENT
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from
the original date of purchase. If a product is defective it will
be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts and included accessories, for
example: Blades, push stick, collection bag and wheels.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
0719
Shredder Housing
Stand
Wheels x 2
Axle Wheel Caps x 2
Collection Bag
Push Stick
Holder
Push Stick
Assembly Screws x 2
Wheel Spacer x 2
Socket Screw
and Washer x 2
Hex Key
3
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
After removing the shredder from
the carton, check that the shredder
has not been damaged. Unpack the
contents.
Fitting the wheels and stand
1. Carefully place the shredder
housing upside down on a at
surface. Place each leg of the
stand into the two holes at the
base of the shredder housing.
2. Using a screwdriver
(not included) secure the
legs using the two assembly
screws provided, turn in a
clockwise direction to tighten.
3. Thread the axle through
the leg stand.
4. Place wheel spacer over protruding
ends of axle.
1. Transport handle
2. Hopper
3. Locking knob
4. On/Off switch
5. Power cord
6. Collection bag hook
7. Motor housing
8. Discharge chute
9. Stand
10. Wheel
11. Push stick
12. Collection bag
13. Hex key
RAPID SHREDDER
ACCESSORIES
KNOW YOUR PRODUCT
1. WHEELS & STAND
ASSEMBLY
1 2
3
4
5
6
7
8
9
WARNING! YOU MAY REQUIRE ASSISTANCE
LIFTING THE SHREDDER OUT OF THE CARTON.
11 12
WARNING! ENSURE THE TOOL IS TURNED OFF
AND DISCONNECTED FROM THE POWER SUPPLY
BEFORE PERFORMING ANY OF THE FOLLOWING
OPERATIONS.
10
13
Starting the shredder
1. Connect the power cord to an appropriate heavy duty
extension cord and plug the extension cord into the mains
power point.
Note: The device has a internal zero voltage switch. This
prevents the device restarting unintentionally after a power
failure.
2. To start the shredder move the on/off
switch to the ON “I” position. When the
shredder is turned on there will be a short
delay before the motor starts and the
speed will uctuate for a few seconds.
This is normal as the shredder is tted
with a preset speed controller designed
to keep the shredder at its optimal speed
when in use.
3. To stop the shredder move the on/off
switch
to the OFF “O” position.
5. Insert each wheel over
the wheel spacers, then
secure with washer and
socket screws.
Note: Ensuring that the
larger inner diameter of the
wheel is facing outwards.
This allows the wheel cap to
be tted.
6. Insert a screwdriver through
the holding hole on the axle
and tighten the socket screws
with hex key provided, turn in
a clockwise direction.
7. Place the wheel cap onto
the wheel and click in
place.
8. Once fully assembled
carefully lift the shredder
into its correct position
supported by the stand
and wheels.
2. STARTING
OPERATION
WARNING! PRIOR TO STARTING THE MOTOR
ENSURE THE SHREDDER IS EMPTY. ENSURE
YOU WEAR SAFETY GLOVES, SAFETY GLASSES
AND EARMUFFS WHEN THE SHREDDER IS IN USE.
WARNING! THE POWER SUPPLY FOR THIS
PRODUCT SHOULD BE PROTECTED BY A
RESIDUAL CURRENT DEVICE RATED AT 30mA OR
LESS.
9. Attach push stick holder to
stand for easy access of your
push stick.

Product specificaties

Merk: Ozito
Categorie: Niet gecategoriseerd
Model: RSH-2535

Heb je hulp nodig?

Als je hulp nodig hebt met Ozito RSH-2535 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Ozito

Ozito

Ozito PXLEK-1840 Handleiding

2 November 2024
Ozito

Ozito PXPPS-1820 Handleiding

8 April 2024
Ozito

Ozito PXNGS-218 Handleiding

8 April 2024
Ozito

Ozito PXHTBK-2518 Handleiding

8 April 2024
Ozito

Ozito PSR-5732U Handleiding

16 Maart 2024
Ozito

Ozito PXCLMLTC-418U Handleiding

16 Maart 2024
Ozito

Ozito PXWBS-200U Handleiding

16 Maart 2024
Ozito

Ozito PXDDK-301U Handleiding

16 Maart 2024
Ozito

Ozito PXCPPS-018U Handleiding

16 Maart 2024
Ozito

Ozito WPHGK-2000U Handleiding

16 Maart 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Taga Harmony

Taga Harmony TOS-600 v.2 Handleiding

26 November 2024
Trace Elliot

Trace Elliot Pro 2x12 Cabinet Handleiding

26 November 2024
Kramer

Kramer K-Bar Camera Bracket Handleiding

26 November 2024
Kramer

Kramer RK-19 Handleiding

26 November 2024
Kramer

Kramer OSP-MM1 Handleiding

26 November 2024
Kramer

Kramer ASPEN-1616UX Handleiding

26 November 2024
Korg

Korg Pitchstrap Handleiding

26 November 2024
NeoMounts

NeoMounts WL70-450BL11 Handleiding

26 November 2024
Kramer

Kramer CLS-AOCH/60 Handleiding

26 November 2024
Klauke

Klauke EKM 6022ISM Handleiding

26 November 2024