Ozito PXSCS-0182 Handleiding

Ozito Niet gecategoriseerd PXSCS-0182

Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito PXSCS-0182 (6 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/6
STANDARD EQUIPMENT
PXSCS-0182
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 18V x 2
No Load Speed: 3,300/min
Working Width: 350mm
Scarier Roller: 16 Blades
Height Adjustment: -9/-6/-3/3mm
Noise Rating: 94dB
Weight: 9.8kg
ozito.com.au
0622
Brushless Scarier
Handle Parts
Handle Assembly Fasteners
BRUSHLESS
SCARIFIER
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
OZITO INDUSTRIES PTY. LTD. 25 Fox Drive, Dandenong South, Victoria, Australia 3175.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
WARNING
The following actions will result in the warranty being
void.
• If the tool or machine has been operated on a supply voltage other than that
specied on the tool or machine.
• If the tool or machine shows signs of damage or defects caused by or
resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool or machine is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts, for example: cable clips, roller blade, bearings etc.
Cable Clip x 3, Safety Key
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
b
a
Bolts
Fitting the Lower Handles
1. Remove the quick-release lever and
washer from one side of the scarier
housing. Connect lower handle to the
mounting thread (a). As you do this
make sure that the embossing (b)
faces inwards.
2. Ret the washer and secure in place
with the quick-release lever.
3. Repeat the process with the
remaining lower handle. Ensure both
lower handles are set to the same
angle.
Note: If necessary, turn the quick-
release lever back sufciently on the
thread so that the handle quick-release
lever can then still be ipped upwards.
1. Upper Handle
2. Start/Stop Lever
3. Safety Switch Button
4. Mid Handle
5. Cable Clip x 3
6. Carry Handle
7. Depth Adjustment Lever
8. Battery Cover
9. Handle Securing Set x 4
10. Lower Handle x 2
11. Quick-Release Lever
12. Safety Key
This machine is compatible with all batteries & chargers from the
Ozito Power X Change range.
BRUSHLESS SCARIFIER
BATTERY & CHARGER
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
1
2
3
4
5
6
7
9
10
8
10 94 125
WARNING! ENSURE THE MACHINE IS SWITCHED
OFF AND THE BATTERIES ARE REMOVED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
Fitting the Mid Handle to the Lower Handles
1. Using two bolts from the handle
securing set, hold the mid handle
piece to the inside ends of the lower
handle. Ensure the bolts t through
the inside of the mid handle and then
through the hole in the lower handles.
2. Secure each side with washer and
quick-release lever.
Fitting the Upper Handle to the Mid Handle
1. Place the upper handle over each side
of the mid handle. From the handle
securing set, t the bolts through the
inner side of the mid handle and then
through the hole in the upper handle.
Note: When you t the upper handle
you can decide the height of the handle
by selecting the appropriate fastening
hole. Ensure you use the same hole on
both sides.
2. Secure in place with washer and quick-release lever.
11
-9 -6 -3 +3
1
2
P
P 1
2
PRESS
2. PREPARATION
WARNING! ENSURE THE MACHINE IS SWITCHED
OFF AND THE BATTERIES ARE REMOVED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
Securing the Power Cord to the Handle
1. Secure the power cord from the
switch housing to the scarier
using the three cable clips.
Note: Ensure that the power
cord follows the handle smoothly
from the switch to the body of the
scarier.
Adjusting the Scarifier Working Depth
The scarier depth is adjusted with the depth adjustment lever.
1. Hold the depth adjustment lever
rmly as you pull inwards away from
the scarier front wheel.
2. Adjust the lever to the required
position, ensure that the lever is
seated in place correctly.
Working height positions
+3 Transport position +3mm
-3 Scarier depth -3mm (shallowest)
-6 Scarier depth -6mm
-9 Scarier depth -9mm (deepest)
Inserting/Removing the Batteries and Safety
Key
Only use two 18V battery packs of equal
capacity and charge state. For best
performance use 2.5Ah batteries and above.
1. Open the battery cover and slide two
batteries of the same capacity and same
charge state into the scarier, aligning the
ribs so that it clicks into place.
2. Insert the safety key. (If the scarier is not
going to be used immediately, do not insert the safety key).
3. Carefully close the battery cover.
4. To remove a battery, open the battery
cover. Press and hold the battery release
tab as you remove the battery.
5. Carefully close the battery cover.
WARNING! ALWAYS ENSURE THE KEY AND BATTERIES
ARE REMOVED WHEN NOT IN USE.
Fitting & Removing Grass Catcher (accessory)
This unit does not include a grass catcher. This is available separately.
1. Lift up the catcher ap on the rear of the scarier with one hand and hook
grass catcher onto the housing from above.
2. Lower the catcher ap. The catcher ap is held against the catcher by a
spring.
3. To empty the catcher, lift the catcher ap with one hand, while unhooking the
catcher with the other.
WARNING! ONLY FIT AND REMOVE THE GRASS
CATCHER WHEN THE SCARIFIER IS SWITCHED OFF AND
THE MOTOR HAS COME TO A STOP.
WARNING! WHEN FITTING THE GRASS CATCHER AFTER
EMPTYING, ALWAYS ENSURE THERE IS NO BUILD UP
OF GRASS IN THE GRASS CHUTE.
Assembling the Grass Catcher (accessory)
This unit does not include a grass catcher. This is available separately.
1. Push both frame parts into each
other.
2. Pull the catcher over the catcher
frame.
3. Pull the rubber clips over the catcher
frame.
Handle Height Positions
1. Release the quick-release levers on
both sides of the scarier housing.
2. Set the handle height to best suit
the user during operation, either
position 1 or 2 MUST BE
SELECTED.
3. Secure the quick-release lever to hold
the handle in the selected position.
Make sure that both sides are set to the same position.

Product specificaties

Merk: Ozito
Categorie: Niet gecategoriseerd
Model: PXSCS-0182

Heb je hulp nodig?

Als je hulp nodig hebt met Ozito PXSCS-0182 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Ozito

Ozito

Ozito PXLEK-1840 Handleiding

2 November 2024
Ozito

Ozito PXPPS-1820 Handleiding

8 April 2024
Ozito

Ozito PXNGS-218 Handleiding

8 April 2024
Ozito

Ozito PXHTBK-2518 Handleiding

8 April 2024
Ozito

Ozito PSR-5732U Handleiding

16 Maart 2024
Ozito

Ozito PXCLMLTC-418U Handleiding

16 Maart 2024
Ozito

Ozito PXWBS-200U Handleiding

16 Maart 2024
Ozito

Ozito PXDDK-301U Handleiding

16 Maart 2024
Ozito

Ozito PXCPPS-018U Handleiding

16 Maart 2024
Ozito

Ozito WPHGK-2000U Handleiding

16 Maart 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Taga Harmony

Taga Harmony TOS-600 v.2 Handleiding

26 November 2024
Trace Elliot

Trace Elliot Pro 2x12 Cabinet Handleiding

26 November 2024
Kramer

Kramer K-Bar Camera Bracket Handleiding

26 November 2024
Kramer

Kramer RK-19 Handleiding

26 November 2024
Kramer

Kramer OSP-MM1 Handleiding

26 November 2024
Kramer

Kramer ASPEN-1616UX Handleiding

26 November 2024
Korg

Korg Pitchstrap Handleiding

26 November 2024
NeoMounts

NeoMounts WL70-450BL11 Handleiding

26 November 2024
Kramer

Kramer CLS-AOCH/60 Handleiding

26 November 2024
Klauke

Klauke EKM 6022ISM Handleiding

26 November 2024