Ozito PXPLS-082 Handleiding

Ozito Niet gecategoriseerd PXPLS-082

Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito PXPLS-082 (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 33 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/8
STANDARD EQUIPMENT
0.5
0
0.5
0
PXPLS-082
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 18V
No Load Speed: 15,000/min
Planing Width: 82mm
Planing Depth: 0-2mm
Rebate Depth: 0-8mm
Blade Type: Reversible 65Mn
Blade Dimensions: 82 x 5.5 x 1.2mm
Weight: 2.41kg
ozito.com.au
0520
Cordless Planer
Parallel Guide, Angle Bracket
& Rebate Guide
2 x Thumb Screws, Carriage
Bolt & Wingnut
Spanner & Hex Key
CORDLESS
PLANER
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specied
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts.
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
0.5
0
1.5
2
Attaching The Rebate Guide
The rebate guide allows you to create a stepped cut of a specic height in a
piece of material
1. Place the rebate guide in the slot on the
same side as the dust extraction chute.
2. Place one of the supplied
thumbscrews into the slot and
tighten by rotating it clockwise.
Attaching The Parallel Guide
1. Fasten the angle bracket to the parallel
guide using the supplied carriage bolt and
wingnut.
2. Align the angle bracket with the
hole on the side of the planer.
3. Place one of the supplied thumbscrews
into the hole and tighten by rotating it
clockwise.
1. Depth Adjustor
2. Safety Lock-Off Button
3. On/Off Trigger
4. Battery Seating
5. Base Park Shoe
6. Rear Base Plate
7. Motor Housing
8. Parallel Guide
9. Angle Bracket
10. Front Base Plate
11. Cutting Depth Guide
12. Dust Extraction Port
13. Rebate Thumbscrew
14. Rebate Guide
This tool is compatible with all batteries & chargers from the Ozito Power X Change
range.
For optimal performance, we recommend the use of a 3.0Ah battery or
larger battery to operate this tool..
CORDLESS PLANER
BATTERY & CHARGER
KNOW YOUR PRODUCT
1. ASSEMBLING THE GUIDES
SETUP & PREPARATION
1.5
2
0.5
0
1.5
2
0
1 42 3
10
14
13
11
12
56789
WARNING! ENSURE THE TOOL IS SWITCHED
OFF AND THE BATTERY IS REMOVED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
Cutting Depth Adjustment
The planing depth can be adjusted between 0 and 2mm. The numbers on
the depth adjustment knob correspond to the planing depth (mm). Always
test the setting on a scrap workpiece rst.
1. Increase the cutting depth by
rotating the knob clockwise.
2. Decrease the cutting depth by rotating the
knob counter-clockwise.
Note: Set the depth adjustment knob back to ‘0’ once nished with the
tool to protect the blades from damage.
Rebate Guide Adjustment
1. Loosen the rebate thumbscrew.
2. Slide the rebate guide to the
required depth.
3. Tighten the rebate thumbscrew to secure
it.
Dust Extraction
A vacuum can be tted to the dust
extraction chute during planing jobs
to collect dust and wood chips,
keeping the work area cleaner.
Installing The Battery Pack
1. Slide the battery into the tool
base until it clicks into place.
2. To remove the battery, hold down
the battery release button and
then slide the battery out.
3. CONTROLS
OPERATION
0.5
0
1.5
2
1.5
2
0.5
0
1.5
2
WARNING! ENSURE THE TOOL IS SWITCHED
OFF AND THE BATTERY IS REMOVED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.

Product specificaties

Merk: Ozito
Categorie: Niet gecategoriseerd
Model: PXPLS-082

Heb je hulp nodig?

Als je hulp nodig hebt met Ozito PXPLS-082 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Ozito

Ozito

Ozito PXLEK-1840 Handleiding

2 November 2024
Ozito

Ozito PXPPS-1820 Handleiding

8 April 2024
Ozito

Ozito PXNGS-218 Handleiding

8 April 2024
Ozito

Ozito PXHTBK-2518 Handleiding

8 April 2024
Ozito

Ozito PSR-5732U Handleiding

16 Maart 2024
Ozito

Ozito PXCLMLTC-418U Handleiding

16 Maart 2024
Ozito

Ozito PXWBS-200U Handleiding

16 Maart 2024
Ozito

Ozito PXDDK-301U Handleiding

16 Maart 2024
Ozito

Ozito PXCPPS-018U Handleiding

16 Maart 2024
Ozito

Ozito WPHGK-2000U Handleiding

16 Maart 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Taga Harmony

Taga Harmony TOS-600 v.2 Handleiding

26 November 2024
Trace Elliot

Trace Elliot Pro 2x12 Cabinet Handleiding

26 November 2024
Kramer

Kramer K-Bar Camera Bracket Handleiding

26 November 2024
Kramer

Kramer RK-19 Handleiding

26 November 2024
Kramer

Kramer OSP-MM1 Handleiding

26 November 2024
Kramer

Kramer ASPEN-1616UX Handleiding

26 November 2024
Korg

Korg Pitchstrap Handleiding

26 November 2024
NeoMounts

NeoMounts WL70-450BL11 Handleiding

26 November 2024
Kramer

Kramer CLS-AOCH/60 Handleiding

26 November 2024
Klauke

Klauke EKM 6022ISM Handleiding

26 November 2024