Ozito PXMMS-120 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito PXMMS-120 (6 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
STANDARD EQUIPMENT
PXMMS-120
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 18V
No Load Speed: 0-620/min
Shaft Size: M14
Paddle Size: Ø100 x 600mm
Weight: 3.0kg
ozito.com.au
0919
Cordless Multi Mixer
Split Shaft Mixing Paddle
2 x 22mm Spanners
CORDLESS
MULTI MIXER
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
OZITO Australia/New Zealand (Head Ofce) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specied
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts.
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1
Attaching The Mixing Paddle
1. Screw the two sections of the mixing paddle together. Use the two
spanners provided to tighten each section against the other.
2. Insert the assembled mixing paddle into the collet of the tool. Use one
spanner to hold the collet in position and the other spanner to tighten the
mixing paddle into place.
WARNING! ACCESSORIES MAY BE HOT AFTER
PROLONGED USE. WHEN REMOVING AN
ACCESSORY FROM THE TOOL, AVOID CONTACT
WITH SKIN AND USE PROPER PROTECTIVE GLOVES
WHEN GRASPING THE BIT ON THE ACCESSORY.
1. Battery Seating
2. Side Handles
3. On/Off Trigger
4. Collet
5. Mixing Shaft
6. MIxing Paddle
7. Lock-Off Button
8. Variable Speed Dial
This tool is compatible with all batteries & chargers from the Ozito Power X Change
range.
CORDLESS MULTI MIXER
BATTERY & CHARGER
KNOW YOUR PRODUCT
1. INSTALLING THE PADDLE
SETUP & PREPARATION
2
1
5
8
6
4
3
7
WARNING! ENSURE THE TOOL IS SWITCHED
OFF AND THE BATTERY IS REMOVED BEFORE
PERFORMING ANY OF THE FOLLOWING TASKS.
Installing The Battery Pack
1. Slide the battery into the tool
base until it clicks into place.
Removing The Battery Pack
1. Press and hold down the battery
release button.
2. Slide the battery out of the
battery seating.
Turning On/Off The Unit
1. Pess and hold down the safety
lock-off button, then the on/off
button to start up the unit.
2. You can then release the lock-off button during use.
3. To stop the unit, release the on/
off trigger.
WARNING! ALLOW THE PADDLE TO COME TO A
COMPLETE STOP BEFORE RAISING IT OUT OF THE
MIXTURE.
Variable Speed Control
The motor on this unit has a safety soft start function to prevent splashing
the materials on start up. Allow the motor to reach steady speed before
adjusting the mixing speed.
1. To increase the speed, turn the
variable speed dial rightwards.
2. To decrease the speed, rotate the
dial leftwards.
WARNING! ENSURE THE MIXER IS HELD FIRMLY
BY THE HANDLES WITH BOTH HANDS WHEN
ADJUSTING THE SPEED CONTROL DIAL.
2. FITTING THE BATTERY 3. CONTROLS
OPERATION
1
4


Product specificaties

Merk: Ozito
Categorie: Niet gecategoriseerd
Model: PXMMS-120

Heb je hulp nodig?

Als je hulp nodig hebt met Ozito PXMMS-120 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Ozito

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd