Ozito PXHTK-400 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito PXHTK-400 (10 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 208 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/10
CORDLESS HEDGE
TRIMMER
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 18V
Cutting Speed: 2,400 SPM
Cutting Capacity: Ø12mm max.
Cutting Length: 400mm max.
Blade Length: 475mm
Weight: 1.94kg
PXHTS-1840
STANDARD EQUIPMENT
Cordless Hedge Trimmer
ozito.com.au
Blade Cover
WARRANTY
0323
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty. Warranty excludes consumable parts, for example: bearings, blades,
blade cover.
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
OZITO INDUSTRIES PTY. LTD. 25 Fox Drive, Dandenong South, Victoria 3175, Australia.
WARNING
The following actions will result in the warranty being
void.
If the tool has been operated on a supply voltage other than that specied
on the tool.
If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
Failure to perform maintenance as set out within the instruction manual.
If the tool is disassembled or tampered with in any way.
Professional, industrial or high frequency use.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
The blade cover protects the
blade when not in use. Simply
slide it off the blade before use.
Once nished operating, place
the cover back over the blade.
Ensure the safety guard is
tted securely onto the hedge
trimmer before use. Tighten
the screws on either side if
necessary.
Blade Cover
Safety Guard
WARNING! ENSURE THE TOOL IS SWITCHED OFF AND
BATTERY IS DISCONNECTED BEFORE PERFORMING ANY
OF THE FOLLOWING TASKS.
WARNING! NEVER USE THE HEDGE TRIMMING UNLESS
THE SAFETY GUARD IS FITTED.
WARNING! NEVER START THE HEDGE TRIMMER WHILE
THE BLADE COVER IS FITTED.
9. Blade Cover
ACCESSORIES
1
9
2 3 4 5 6
7 8
1. Impact Guard
2. Blade
3. Safety Guard
4. Front Handle
5. Safety Switch
6. Rear Handle
7. On/Off Trigger
8. Battery Seating
CORDLESS HEDGE TRIMMER
WARNING! WHEN HANDLING THE BLADE ASSEMBLY,
WEAR NON-SLIP, HEAVY-DUTY PROTECTIVE GLOVES. DO
NOT PLACE YOUR HAND OR FINGERS BETWEEN BLADES
OR IN ANY POSITION WHERE THEY COULD GET PINCHED
OR CUT. NEVER TOUCH BLADES OR SERVICE THE UNIT
WITH THE BATTERY INSTALLED.
BATTERY & CHARGER
This tool is compatible with all battery and
chargers from the Ozito PXC Range.
3. CONTROLS2. INSERTING &
REMOVING THE BATTERY
OPERATION
1. Align the ribs of the battery
with the recess on the rear of
the handle.
1. Press and hold the safety
switch.
1. Press and hold the battery
release tab to release the
battery as you slide the
battery out.
2. Slide the battery in so
that it clicks into place.
2. To start the hedge
trimmer, squeeze the on/
off trigger.
3. To stop operating, release
the on/off trigger.
Inserting the Battery
Removing the Battery
Switching On and Off
“CLICK”
PRESS
WARNING! BEFORE YOU START THE UNIT, MAKE SURE
THAT THE HEDGE TRIMMER IS NOT MAKING CONTACT
WITH ANY OBJECTS.
WARNING! DO NOT OPERATE THE HEDGE TRIMMER
IN A TREE, ON A LADDER, FROM A ROOFTOP, OR ANY
UNSTABLE SUPPORT, THIS IS EXTREMELY DANGEROUS.
WARNING! ALWAYS USE THE HEDGE TRIMMER WITH
BOTH HANDS. NEVER HOLD SHRUBS WITH ONE HAND
AND OPERATE THE HEDGE TRIMMER WITH THE OTHER.
FAILURE TO HEED THIS WARNING MAY RESULT IN
SERIOUS INJURY.
Note: If either the safety switch or on/off trigger is released, the
hedge trimmer will stop operation.


Product specificaties

Merk: Ozito
Categorie: Niet gecategoriseerd
Model: PXHTK-400

Heb je hulp nodig?

Als je hulp nodig hebt met Ozito PXHTK-400 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Ozito

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd