Ozito PXBHS-180 Handleiding

Ozito Niet gecategoriseerd PXBHS-180

Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito PXBHS-180 (7 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/7
STANDARD EQUIPMENT
BRUSHLESS
15 17 191311
BRUS HLESS
15 17 191311
PXBHS-180
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 18V
Chuck Size: Ø2-13mm Keyless
Chuck Material: Metal
No Load Speed: 0-500 / 0-1,800/min
Impact Rate: 0-8,000 / 0-28,000/min
Torque Settings: 20
Max. Torque: 50Nm
Drilling Capacities: Ø32mm (Timber)
Ø13mm (Metal)
Ø10mm (Masonry)
Weight: 1.6kg
ozito.com.au
0321
Brushless 13mm Hammer Drill
& Belt Clip
13MM
HAMMER DRILL
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU
MUST RETURN THE PRODUCT TO YOUR NEAREST BUNNINGS
WAREHOUSE WITH YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY PLEASE TELEPHONE
OUR CUSTOMER SERVICE HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE THE MODEL
NUMBER AND DATE OF PURCHASE AVAILABLE. A CUSTOMER
SERVICE REPRESENTATIVE WILL TAKE YOUR CALL AND
ANSWER ANY QUESTIONS YOU MAY HAVE RELATING TO THE
WARRANTY POLICY OR PROCEDURE.
OZITO Australia/New Zealand (Head Ofce) 25 Fox Drive, Dandenong South, Victoria, Australia 3175.
The benets provided under this warranty are in addition to other rights and
remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to
a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods
repaired or replaced if the goods fail to be of acceptable quality and the failure
does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this
warranty, however, where you have suffered any additional direct loss as a result of
a defective product you may be able to claim such expenses by contacting our
customer service helpline above.
WARNING
The following actions will result in the warranty being
void.
• If the tool has been operated on a supply voltage other than that specied
on the tool.
• If the tool shows signs of damage or defects caused by or resulting from
abuse, accidents or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
5 YEAR REPLACEMENT WARRANTY
Your Product is guaranteed for a period of 60 months from the original date of
purchase and is intended for DIY (Do It Yourself) use only. If a product is defective it
will be replaced in accordance with the terms of this warranty. Lithium Ion
batteries and chargers are covered by a 36 month
warranty and are excluded from the warranty extension. Warranty excludes
consumable parts.
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
BRUSHLESS
15 17 191311
Installing The Battery Pack
1. Slide the battery into the tool
base until it clicks into place.
Removing The Battery Pack
1. Hold down the battery release
button.
2. Slide the battery out.
1. Keyless Chuck
2. Torque Adjustment Collar
3. Function Collar
4. Gear Selector
5. Forward/Reverse Button
6. Variable Speed Trigger
7. LED Light
8. Battery Seating
9. Belt Clip
This tool is compatible with all batteries & chargers from the Ozito Power X Change
range.
BRUSHLESS 13MM DRILL DRIVER
BATTERY & CHARGER
KNOW YOUR PRODUCT
1. FITTING THE BATTERY
SETUP & PREPARATION
1 2 3
5
7
8
9
6
4
Speed Control
The gear selector controls the speed of the drill. First gear allows slower
drilling with more torque, while second gear is suitable when less torque
but higher speed is required.
1. Slide the switch forward to
select rst gear.
2. Slide the switch backward to
select second gear.
Screwdriving
1. To screw into wood, metal or
plastic, turn the function collar
to align the arrow on the housing
with the screw icon. The clutch is
then enabled to adjust torque.
Note: 1st gear (low speed) is
recommended for screwdriving.
2. Adjust the torque by rotating
the torque collar to the desired
setting.
Note: Selecting a higher torque setting will allow the drill to use more
torque to drive the screw in or out. To prevent damaging the screw head,
it is recommended to start at a low torque setting and increase when
necessary.
Drilling
1. To drill into wood, metal or
plastic, turn the function collar
and align the arrow on the
housing with the drill icon.
Hammer Drilling
1. To drill into concrete, brick or
other masonry, turn the function
collar to align the arrow on the
housing with the hammer icon.
Note: 2nd gear (high speed) is
recommended for hammer drilling.
15 17 191311
15 17 191311
15 17 191311
2nd Gear1st
Gear

Product specificaties

Merk: Ozito
Categorie: Niet gecategoriseerd
Model: PXBHS-180

Heb je hulp nodig?

Als je hulp nodig hebt met Ozito PXBHS-180 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Ozito

Ozito

Ozito PXLEK-1840 Handleiding

2 November 2024
Ozito

Ozito PXPPS-1820 Handleiding

8 April 2024
Ozito

Ozito PXNGS-218 Handleiding

8 April 2024
Ozito

Ozito PXHTBK-2518 Handleiding

8 April 2024
Ozito

Ozito PSR-5732U Handleiding

16 Maart 2024
Ozito

Ozito PXCLMLTC-418U Handleiding

16 Maart 2024
Ozito

Ozito PXWBS-200U Handleiding

16 Maart 2024
Ozito

Ozito PXDDK-301U Handleiding

16 Maart 2024
Ozito

Ozito PXCPPS-018U Handleiding

16 Maart 2024
Ozito

Ozito WPHGK-2000U Handleiding

16 Maart 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Taga Harmony

Taga Harmony TOS-600 v.2 Handleiding

26 November 2024
Trace Elliot

Trace Elliot Pro 2x12 Cabinet Handleiding

26 November 2024
Kramer

Kramer K-Bar Camera Bracket Handleiding

26 November 2024
Kramer

Kramer RK-19 Handleiding

26 November 2024
Kramer

Kramer OSP-MM1 Handleiding

26 November 2024
Kramer

Kramer ASPEN-1616UX Handleiding

26 November 2024
Korg

Korg Pitchstrap Handleiding

26 November 2024
NeoMounts

NeoMounts WL70-450BL11 Handleiding

26 November 2024
Kramer

Kramer CLS-AOCH/60 Handleiding

26 November 2024
Klauke

Klauke EKM 6022ISM Handleiding

26 November 2024