Ozito LRTK-036 Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito LRTK-036 (8 pagina's) in de categorie Multitool. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/8
10 x Grinding Stones, Whet Stone,
2 x Drum Mandrels, 2 x Screw
Mandrels & Cone Mandrel
16 x Sanding Bands & 30 Sanding
Discs
0 I
Charging Adaptor, USB Cable, 5 x
Collets, Spanner, LED Collar & Carry
Case
20 Cut-Off Wheels, 2 x HSS Cutters,
5 x Drill Bits & 10 x Diamond
Engravers
2 x Steel Brushes, 2 x Nylon
Brushes, Rubber Polishing Point,
Felt Tip with Shank, 5 x Felt
Wheels, Felt Tip & Cloth Wheel
CORDLESS ROTARY
TOOL & 118
ACCESSORY KIT
3.6V Li-Ion
INSTRUCTION MANUAL
SPECIFICATIONS
Input: 3.6V
Battery: 1.5Ah Li-Ion
No Load Speed: 5,000-18,000/min
Speed Settings: 6
Collet Size: Ø1.6, 2.4, 3.2mm
Charge Time: 3-5hours
Speeds: 1-6
Weight: 0.2kg
LRTK-036
STANDARD EQUIPMENT
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
3 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 36 months from
the original date of purchase. If a product is defective it will
be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts, for example: valve adapters
and accessories.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
Cordless 3.6V Rotary Tool
0519
ONLINE MANUAL
Scan this QR Code with
your mobile device to take
you to the online manual.
0 I
8 x NARROW
SANDING BANDS
30 x SANDING DISCS
20 x CUT-OFF WHEELS
FELT TIP
FELT TIP
WITH SHANK
CONE
MANDREL
10 x GRINDING STONES
WHET STONE
LED COLLAR
5 x COLLETS
2 x HSS
CUTTERS
10 x DIAMOND ENGRAVERS
5 x DRILL BITS
2 x STEEL BRUSHES
2 x NYLON
BRUSHES
RUBBER
POLISHING
POINT
CLOTH WHEEL
5 x FELT WHEELS
NARROW
DRUM
MANDREL
WIDE DRUM
MANDREL
2 x SCREW
MANDRELS
8 x WIDE
SANDING BANDS
Battery Charge Indicator
The rotary tool is equipped with a battery status indicator to show
the battery charge state. Press the on/o button and see which LED
lights up to gauge the status.
Full Charge
Mid Charge
Low charge; requires charging soon.
Battery requires immediate charging.
Note: The battery needs to be removed from the tool to check the
charge state.
Note: Once connected for charging, the battery status indicator lights
will illuminate red and remain so whilst charging. The green LED will
illumintate when the tool is fully charged.
Charging Using The AC Adaptor
1. Plug one end of the USB cable into
the AC Adaptor and connect the
adaptor into mains power outlet.
2. Plug the other end of the USB cable
directly into the charging input.
Charging Using A USB Outlet
1. Plug the USB cable directly into the charging input.
2. Charge via USB cable to a USB outlet.
1. Charging Input
2. Battery Status Indicator Light
3. On/O Button
4. Spindle Lock Button
5. Shaft Collar
6. Collet Nut
7. Variable Speed Controls
CORDLESS 3.6 ROTARY TOOL
ACCESSORIES
KNOW YOUR PRODUCT
1. BATTERY & CHARGER
SETUP & PREPARATION
23 4 5
1
6
7
WARNING! THE POWER SUPPLY FOR THIS
CHARGER IS RECOMMENDED FOR USE WITH A
RESIDUAL CURRENT DEVICE (RATED AT 30mA OR
LESS).
Attaching The LED Collar
The LED collar can be attached to provide additional direct lighting on
your workpiece during detailed, precision work.
1. Turn the shaft collar anti-
clockwise to loosen and
remove it.
2. Slide the LED collar onto the
shaft and turn it clockwise to
tighten it into place.
3. Flip the lever on the back
of the LED collar to the ‘I’
position to turn it on.
4. To turn o the LED collar, ip
the lever to the ‘0’ position.
Attaching Accessories
1. Press and hold the spindle
lock button.
2. Using the supplied wrench,
slightly loosen the collet nut.
3. Insert the shaft of the
accessory into the collet.
4. With the spindle lock button
engaged, nger tighten the
collet nut until the accessory
shank is rmly gripped by the
collet.
Note: Avoid excessive tightening of the collet nut when no accessory
is inserted, as this may cause the collet to get stuck in the collet nut.
If this happens, push the shank of an accessory into the hole of the
collet nut.
2. INSTALLING ACCESSORIES
0 I
0 I
WARNING! ENSURE THAT THE TOOL IS SWITCHED
OFF BEFORE PERFORMING ANY OF THE
FOLLOWING OPERATIONS.
Product specificaties
| Merk: | Ozito |
| Categorie: | Multitool |
| Model: | LRTK-036 |
Heb je hulp nodig?
Als je hulp nodig hebt met Ozito LRTK-036 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Multitool Ozito
23 Augustus 2024
30 Juli 2024
14 Juni 2023
9 Juni 2023
6 Juni 2023
15 Mei 2023
3 Mei 2023
3 Mei 2023
21 April 2023
14 April 2023
Handleiding Multitool
- Multitool Bosch
- Multitool AEG
- Multitool DeWalt
- Multitool Bavaria
- Multitool Dremel
- Multitool Einhell
- Multitool Extech
- Multitool Fein
- Multitool Ferm
- Multitool Festool
- Multitool Gamma
- Multitool Gude
- Multitool Hama
- Multitool Hikoki
- Multitool Kress
- Multitool Makita
- Multitool Metabo
- Multitool Milwaukee
- Multitool Parkside
- Multitool Powerfix
- Multitool Powerplus
- Multitool Renovator
- Multitool Robust
- Multitool Rocktrail
- Multitool Ryobi
- Multitool Silvercrest
- Multitool Silverline
- Multitool Skil
- Multitool Stiga
- Multitool Taurus
- Multitool Toolcraft
- Multitool Topcraft
- Multitool Trotec
- Multitool Varo
- Multitool Vonroc
- Multitool Westfalia
- Multitool Workzone
- Multitool Worx
- Multitool Black And Decker
- Multitool Cocraft
- Multitool Meec Tools
- Multitool Hilti
- Multitool Cotech
- Multitool Fieldmann
- Multitool Lezyne
- Multitool Proxxon
- Multitool Porter-Cable
- Multitool EGO
- Multitool Leatherman
- Multitool Dedra
- Multitool Graphite
- Multitool RIDGID
- Multitool Craftsman
- Multitool Alpha Tools
- Multitool G-Technology
- Multitool SKS
- Multitool Baumr-AG
- Multitool MTM
- Multitool Meister Craft
- Multitool McKenzie
- Multitool Ergotools Pattfield
- Multitool CMT Orange Tools
- Multitool Donau Elektronik
Nieuwste handleidingen voor Multitool
17 November 2024
17 November 2024
14 November 2024
20 Oktober 2024
10 Juli 2024
9 Juni 2024
9 Juni 2024
9 Juni 2024
17 April 2024
10 April 2024