Ozito FSR-260 Handleiding

Ozito Niet gecategoriseerd FSR-260

Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito FSR-260 (6 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 185 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/6
260W
FILE SANDER
260W
FILE SA NDER
FILE
SANDER
260W
INSTRUCTION MANUAL
SPECIFICATIONS
Mains Voltage: 230–240V ~ 50Hz
Input Power: 260W
Belt Speed: 330-550m/min
Belt Size: 13 x 457mm
IP Rating: IP20
Weight: 1.15kg
FSR-260
STANDARD EQUIPMENT
3 YEAR REPLACEMENT WARRANTY*
Your product is guaranteed for a period of If 36 months from the original date of purchase.
a product is defective it will be replaced in accordance with the terms of this warranty. Warranty
excludes consumable parts, for example: valve adapters and accessories.
*This product is intended for DIY use only and replacement warranty covers domestic use.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other than that specified on the tool.
• If the tool shows signs of damage or defects caused by or resulting from abuse, accidents
or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
Ozito Industries Pty. Ltd. 25 Fox Drive, Dandenong South, Victoria, Australia 3175.
ozito.com.au
File Sander
80 grit Sanding Belt, 120 grit
Sanding Belt & Dust Extraction
Adaptor
0721
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY
YOU MUST RETURN THE PRODUCT TO YOUR NEAREST
BUNNINGS WAREHOUSE WITH YOUR BUNNINGS
REGISTER RECEIPT. PRIOR TO RETURNING YOUR
PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR
CUSTOMER SERVICE HELPLINE:
Australia: 1800 069 486
New Zealand: 0508 069 486
The benefits provided under this warranty are in addition to other rights and remedies which
are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to a
replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this warranty,
however, where you have suffered any additional direct loss as a result of a defective product
you may be able to claim such expenses by contacting our customer service helpline above.
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE
THE MODEL NUMBER AND DATE OF PURCHASE
AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE
WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS
YOU MAY HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
260W
FILE SANDER
1. Sanding Belt
2. Variable Speed Dial
3. Lock-On Button
4. On/Off Trigger
5. Rear Guide Roller
6. Rotating File Arm
7. Front Belt Roller
8. Belt Tension Button
9. Dust Adaptor
10. Arm Rotation Lock
FILE SANDER
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
Fitting the Sanding Belt
1. Push the front belt roller
towards the body of the tool,
until it clicks into place.
2. Make sure that the rotation
direction indicated by the
arrows on the belt and the
tool match.
WARNING! THE ARROWS ON THE SANDING BELT
MUST ALIGN WITH THE ARROWS ON THE FILE ARM.
INCORRECT FITMENT COULD BREAK THE BELT AND IS
NOT COVERED BY THE WARRANTY.
3. Place one side of the
sanding belt down between
the rear guide roller and the
housing.
4. Place the other end of the sanding
belt onto the front belt roller, making
sure that the belt is central on both
rollers.
5. Press the belt tensioning
button to secure the belt in
position.
Removing The Sanding Belt
1. Push the front belt roller
towards the body of the tool,
until it clicks into place.
2. Remove the sanding belt
from the rollers.
a
b
2 3
8910
7
6
5
4
1
WARNING! ENSURE THE TOOL IS TURNED OFF AND
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING OPERATIONS.
ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
Adjusting the File Arm Angle
1. Loosen the arm rotation
lock.
2. Adjust the angle of the rotating file arm to the desired position.
3. Turn the arm rotation lock clockwise
to hold the arm in place.
Sandpaper Selection
Selecting the correct grit of sandpaper is an important step in
achieving optimum results. Coarse grit will remove the most
material. Finer grit will produce a smoother finish. The condition of
the workpiece will determine the grit of the sandpaper to be used.
The higher the grit number, the finer the grade of sandpaper.
If the surface is rough, start with a coarse grit and sand until the
surface is uniform. Medium grit may then be used to remove
scratches left by the coarser grit. Finer grit is then used to
finish the surface. Always continue sanding with each grade of
sandpaper until the surface is uniform.
MATERIAL APPROPRIATE GRIT
Coarse Sanding Fine Sanding
Paintwork 180 400
Wood: Softwood 60 240
Hardwood 60 180
Veneer 240 320
Note: If intermediate sanding is required, choose a grit rating
between coarse and fine. The above table is intended as a guide
only. To ensure a satisfactory result, a small, inconspicuous area
should first be tested to ensure the grit of sandpaper chosen is
suitable for the desired finish.
Fitting the Dust Extraction Adaptor
The dust extraction adaptor allows you to connect a vacuum
hose to remove dust and debris from the working surface as you
operate.
Note: Before attaching the dust extraction adaptor, you must first
fit the sanding belt.
1. Align the dust extraction
adaptor with the belt
tensioning button.
2. Press the dust adaptor onto the
rotating file arm so that the tabs on
the adaptor clip over the arm.
3. Attach a dust hose onto the end of the dust extraction adaptor.

Product specificaties

Merk: Ozito
Categorie: Niet gecategoriseerd
Model: FSR-260

Heb je hulp nodig?

Als je hulp nodig hebt met Ozito FSR-260 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Ozito

Ozito

Ozito PXLEK-1840 Handleiding

2 November 2024
Ozito

Ozito PXPPS-1820 Handleiding

8 April 2024
Ozito

Ozito PXNGS-218 Handleiding

8 April 2024
Ozito

Ozito PXHTBK-2518 Handleiding

8 April 2024
Ozito

Ozito PSR-5732U Handleiding

16 Maart 2024
Ozito

Ozito PXCLMLTC-418U Handleiding

16 Maart 2024
Ozito

Ozito PXWBS-200U Handleiding

16 Maart 2024
Ozito

Ozito PXDDK-301U Handleiding

16 Maart 2024
Ozito

Ozito PXCPPS-018U Handleiding

16 Maart 2024
Ozito

Ozito WPHGK-2000U Handleiding

16 Maart 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Taga Harmony

Taga Harmony TOS-600 v.2 Handleiding

26 November 2024
Trace Elliot

Trace Elliot Pro 2x12 Cabinet Handleiding

26 November 2024
Kramer

Kramer K-Bar Camera Bracket Handleiding

26 November 2024
Kramer

Kramer RK-19 Handleiding

26 November 2024
Kramer

Kramer OSP-MM1 Handleiding

26 November 2024
Kramer

Kramer ASPEN-1616UX Handleiding

26 November 2024
Korg

Korg Pitchstrap Handleiding

26 November 2024
NeoMounts

NeoMounts WL70-450BL11 Handleiding

26 November 2024
Kramer

Kramer CLS-AOCH/60 Handleiding

26 November 2024
Klauke

Klauke EKM 6022ISM Handleiding

26 November 2024