Ozito ATK-500 Handleiding

Ozito Niet gecategoriseerd ATK-500

Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito ATK-500 (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 245 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/8
50PCE AIR TOOL KIT
IMPAC T WRENC H , C HI SEL, RATCH ET,
BLOW GU N & A CC ESSORIES
50PCE AIR TOOL KIT
IMPA CT WRENCH, CHISEL, RATCHET,
BLOW GUN & ACCESSORI ES
AIR TOOL KIT
WITH KITBOX
50 PIECE
INSTRUCTION MANUAL
ATK-500
STANDARD EQUIPMENT
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY
YOU MUST RETURN THE PRODUCT TO YOUR NEAREST
BUNNINGS WAREHOUSE WITH YOUR BUNNINGS
REGISTER RECEIPT. PRIOR TO RETURNING YOUR
PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR
CUSTOMER SERVICE HELPLINE:
Australia: 1800 069 486
New Zealand: 0508 069 486
The benefits provided under this warranty are in addition to other rights and remedies which
are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to a
replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this warranty,
however, where you have suffered any additional direct loss as a result of a defective product
you may be able to claim such expenses by contacting our customer service helpline above.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE
THE MODEL NUMBER AND DATE OF PURCHASE
AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE
WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS
YOU MAY HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
Ozito Industries Pty. Ltd.
25 Fox Drive, Dandenong South, Victoria, Australia 3175.
ozito.com.au
1121
3 YEAR REPLACEMENT WARRANTY*
Your product is guaranteed for a period of If 36 months from the original date of purchase.
a product is defective it will be replaced in accordance with the terms of this warranty. Warranty
excludes consumable parts, for example: valve adapters and accessories.
*This product is intended for DIY use only and replacement warranty covers domestic use.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other than that specified on the tool.
• If the tool shows signs of damage or defects caused by or resulting from abuse, accidents
or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
Kitbox
Air Tool Accessories x 22
Inflation Accessories x 8
Connection Accessories x 14
Air Impact Wrench, Air Ratchet,
Air Chisel & Quick Change
Spring, & Blow Gun
SPECIFICATIONS Impact
Wrench Ratchet Chisel
Max. Air Pressure 6bar (90psi) 6bar (90psi) 6bar (90psi)
Avg. Air Consumption 212L/min 113L/min 141.6L/min
No Load Speed 7,000/min 160/min 4,500bpm
Max. Torque 340Nm 69Nm
Chuck ½” Square 3/8” Square 10.2mm (0.4”)
Barrel Stroke 41mm
Air Inlet 1/4” BSP 1/4” BSP 1/4” BSP
Weight 2.18kg 1.13kg 1.05kg
OIL
KNOW YOUR PRODUCT
ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
1. Oil inlet
2. Air Inlet
3. Air Flow Regulator Valve
4. On/Off Trigger
5. Forward/Reverse Button
6. Socket Adaptor
15. Blow Gun
16. Knurled Adaptor
17. Tapered Nozzle
18. Rubber Nozzle
19. Needle Nozzle
20. High Pressure Nozzle
21. Safety Adaptor
22. Air Chuck
23. Tyre Pressure Gauge
AIR IMPACT WRENCH BLOW GUN & ACCESSORIES
24. Chisels x 3
25. Hex Drive Bits x 6
26. Bit Holder
27. 3/8”-1/2” Adaptor
28. Extension Bit
29. Imperial Sockets x5
30. Metric Sockets x 5
AIR TOOL ACCESSORIES
31. Female Coupler
32. Female Nitto Connector
33. Hose Connectors x 2
34. Inline Mini Oiler
35. Oil Pot
36. Thread Seal Tape
37. Hex Key
38. 3600 Swivel Connector
39. Male Nitto Connectors x 5
CONNECTION ACCESSORIES
11. Quick Change Spring
12. On/Off Trigger
13. Air Regulator
14. Air Inlet
AIR CHISEL
1
2
13
3
6
5
4
35
36
37
14
24
31
39
29
25
32 34
26
33
2827
30
7. Forward/Reverse Button
8. Socket Retainer
9. On/Off Trigger
10. Air Inlet
AIR RATCHET
8
12
38
11
9
7
10
23
15 16 17 18 19 20 21 22
2. ACCESSORIES
SETUP & PREPARATION
Attaching Sockets to the Air Impact Wrench
1. Push the desired Socket onto
the Socket Adaptor until it
clicks into place.
2. To remove the Socket, simply pull the Socket off the Socket
Adaptor on the tool.
Note: The Air Impact Wrench should only be used with impact
sockets. Standard sockets may shatter and break.
Attaching Sockets to the Air Ratchet
1. Press the 3/8”-1/2” Adaptor
onto the Socket Retainer of
the Ratchet.
Note: The Extension Bar can be attached in addition to the 3/8”-
1/2” Adaptor if more reach is required.
2. Push the desired Socket into the 3/8”-1/2” Adaptor until it clicks
into place.
3. To remove the Socket or Adaptor, simply pull it off the Socket
Retainer on the tool.
Note: The Air Ratchet should only be used with impact sockets.
Standard sockets may shatter and break.
Connecting to the Air Compressor
The Male Nitto Connectors can be attached and left on the Blow
Gun, Air Chuck, Air Impact Wrench, Air Ratchet, & Air Chisel for
quick and easy changes between tools.
1. Wrap Thread Seal Tape
clockwise about the threads
of a Male Nitto Connector.
2. On the desired air tool, remove the black plastic cap from the Air
Inlet. If there is no cap, move on to Step 3.
3. Attach the Male Nitto
Connector to the Air Inlet of
the desired tool.
4. On the free end of the air
hose, pull back the sleeve
on the Female Coupler
and insert the Connector
attached in the previous
step.
WARNING! THE AIR IMPACT WRENCH, AIR RATCHET,
AND AIR CHISEL ARE RATED TO 90PSI. ENSURE YOUR
COMPRESSOR IS SET NO HIGHER THAN 90PSI WHEN
USING THESE TOOLS.
WARNING! ENSURE THE TOOL IS TURNED OFF AND
DISCONNECTED FROM THE COMPRESSOR BEFORE
PERFORMING ANY OF THE FOLLOWING OPERATIONS.

Product specificaties

Merk: Ozito
Categorie: Niet gecategoriseerd
Model: ATK-500

Heb je hulp nodig?

Als je hulp nodig hebt met Ozito ATK-500 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Ozito

Ozito

Ozito PXLEK-1840 Handleiding

2 November 2024
Ozito

Ozito PXPPS-1820 Handleiding

8 April 2024
Ozito

Ozito PXNGS-218 Handleiding

8 April 2024
Ozito

Ozito PXHTBK-2518 Handleiding

8 April 2024
Ozito

Ozito PSR-5732U Handleiding

16 Maart 2024
Ozito

Ozito PXCLMLTC-418U Handleiding

16 Maart 2024
Ozito

Ozito PXWBS-200U Handleiding

16 Maart 2024
Ozito

Ozito PXDDK-301U Handleiding

16 Maart 2024
Ozito

Ozito PXCPPS-018U Handleiding

16 Maart 2024
Ozito

Ozito WPHGK-2000U Handleiding

16 Maart 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Taga Harmony

Taga Harmony TOS-600 v.2 Handleiding

26 November 2024
Trace Elliot

Trace Elliot Pro 2x12 Cabinet Handleiding

26 November 2024
Kramer

Kramer K-Bar Camera Bracket Handleiding

26 November 2024
Kramer

Kramer RK-19 Handleiding

26 November 2024
Kramer

Kramer OSP-MM1 Handleiding

26 November 2024
Kramer

Kramer ASPEN-1616UX Handleiding

26 November 2024
Korg

Korg Pitchstrap Handleiding

26 November 2024
NeoMounts

NeoMounts WL70-450BL11 Handleiding

26 November 2024
Kramer

Kramer CLS-AOCH/60 Handleiding

26 November 2024
Klauke

Klauke EKM 6022ISM Handleiding

26 November 2024