Ozito ASG-DLXU Handleiding

Ozito Niet gecategoriseerd ASG-DLXU

Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito ASG-DLXU (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 50 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/3

DELUXE

SPRAY GUN

160-240 ml/min

ORIGINAL INSTRUCTIONS

SPECIFICATIONS

Working Air Pressure: 3.5Bar (50psi)

Max Air Pressure: 6Bar (87psi)

Av. Air Consumption: 85-226l/min (3-8cfm)

Nozzle Size: ø1.8mm

Spray Width: 40-70mm

Flow Rate: 160-240ml/min

Feed Type: Suction

Paint Pot Size: 1000ml

Air Inlet: 1/4” BSP

Weight (tool only): 0.84kg

WHAT’S IN THE BOX

Spray Gun

CLEANING PROCEDURE

DESCRIPTION OF SYMBOLS

TROUBLESHOOTING

SPARE PARTS

ozito-diy.co.uk

ASG-DLXU

4 Connect the spray gun to the air

supply then spray solution into a

bucket.

3 Fill paint pot with appropriate

cleaning solution.

9 Dry all components and then re-assemble the spray gun.

5 Repeat steps 3-4 until the cleaning solution runs clear from gun.

Warning Read instruction

manual

Wear eye protection

and breathing mask

Cubic feet per minute

Wear ear protection

Millilitres per minute

ml/min cfm

If coating material was water based (acrylic paint), use ONLY

water when performing the cleaning procedure. Use of solvent

based cleaning materials on water based paints will result in a

new substance that will be extremely difcult to clean.

If coating material was oil based (enamel paint, lacquer etc.)

use ONLY the appropriate cleaning solution. Read the cleaning

instructions printed on the coating material’s label to determine

which cleaning material you need. The following solvent based

cleaning products are safe to use in the paint sprayer:

• Diggers Easy Cleanup Turpentine Substitute (highly

recommended)

• Mineral Turpentine

• Paint Thinner

1 Empty the paint pot of remaining

material.

2 Rinse paint pot, suction tube &

nozzle with cleaning solution. Wipe

all parts with a clean cloth.

6 Unscrew and remove uid

adjustment dial, needle & spring.

Clean all parts in cleaning solution.

7 Unscrew and remove nozzle.

Clean in cleaning solution.

8 Take note of the 4 holes on the

nozzle, if blocked clean carefully

using a small needle.

SPRAY GUN SAFETY WARNINGS

WARNING! Read all safety warnings and all instructions. Failure to follow the warnings

and instructions may result in electric shock, re and/or serious injury.

Save all warnings and instructions for future reference. The term “power tool” in the

warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power

tool.

1. Work area safety

a. Cluttered or dark areas invite accidents. Keep work area clean and well lit.

b. Do not operate power tools in explosive atmospheres, such as in the presence of ammable

liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

c. Distractions can cause you to lose Keep children and bystanders away while operating a power tool.

control.

d. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away

from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

e. Check the maximum pressure rating of any tools or accessories that you intend using with the

compressor. The output pressure of the air from the compressor must be regulated so that it never exceeds

the rated pressure of the tool or accessory.

f. Always wear safety goggles or glasses when using the air compressor. Never point the nozzle of an

accessory towards any part of your body or towards another person.

g. Use safety equipment including safety goggles or shield, ear protection, breathing or respirator mask and

protective clothing.

h. The tool must be used only for its prescribed purpose. Any use other than those mentioned in this Manual

will be considered a case of misuse. The user and not the manufacturer shall be liable for any damage or

injury resulting from such cases of misuse.

WARNING! In the event that an air line is cut or broken, the air supply must be turned off at the

compressor. A broken air line which is not supported is extremely dangerous and can whip around

very quickly, both with the capability of striking people, and blowing foreign particles into the air.

• Do not attempt to catch the air line but immediately keep bystanders well clear and turn off the air supply to

the hose, turn off the compressor at the On / Off button, and then remove the hose from the compressor.

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or

mental capabilities, or lack of experience and knowledge, unless they have been given the supervision or

instruction concerning use of the appliance by a person responsible for their safety.

• Children should be supervised to ensure that they do not play with the appliance.

GENERAL AIR TOOL SAFETY WARNINGS

WARNING!

This appliance is not intended for use by persons (including children)

with reduced physical, sensory or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision or instruction concerning use of

the appliance by a person responsible for their safety.

Using an Extension Hose

Always use an approved extension hose suitable for the air input of this tool. Before

use, inspect the hose for signs of damage, wear and ageing. Replace the extension

hose if damaged or defective.

When using an hose on a reel, always unwind the lead completely.

It is recommended that the hose is a maximum of 25m in length.

NEVER under any circumstances aim the nozzle at another person or animal.

• In the event of an injury occurring, seek medical advice immediately.

• The spray gun must not be used for spraying ammable paints and solvents with a

ash point of less than 21ºC.

• Always ensure there is adequate ventilation when spraying.

• The use of ear protection is recommended.

• Eye protection is recommended to keep hazardous vapours and liquids out of eyes.

• Always wear a face mask when spraying.

• Always read the paint manufacturers thinning instructions before using.

• Always keep the spray nozzle in place during use. Never allow the spray to come in

direct contact with the skin.

• Never immerse the spray gun in liquid.

• The spray gun must not be cleaned by using ammable liquids with a ash point of

less than 21ºC.

NEVER spray near a naked ame, including an appliance pilot light.

NEVER smoke whilst spraying.

NEVER allow children to operate or play with the spray gun.

• Before cleaning, always disconnect the appliance from the air supply.

• Always disconnect from air supply when relling the paint pot.

• After every use ensure you clean your spray gun thoroughly.

NEVER use the spray gun outside when it is raining.

PROBLEM CAUSE REMEDY

Little or no material

ow

Fluid adjustment dial too limited Turn uid adjustment dial further out

by rotating anti-clockwise

Air pressure too low

Increase air pressure at the

compressor

Turn air regulator valve further out

clockwise on gun

Material too thick Thin material

Nozzle clogged Clean nozzle

Material leaking

Nozzle loose Tighten nozzle

Nozzle worn Contact Ozito for replacement spare

parts

Spray pattern is

heavy in the middle

Fan requires adjustment Turn fan adjustment dial further out

anti-clockwise

Air pressure too low

Increase air pressure at the

compressor

Turn air regulator valve further out

clockwise on gun

Spray pattern

heavy at the edges

Fan requires adjustment Turn fan adjustment dial in clockwise

Air pressure too high

Reduce air pressure at the

compressor

Turn air regulator valve further in

clockwise on gun

Spray jet pulsates

Material in paint pot running out Rell paint pot

Nozzle clogged Clean nozzle

Material too thick Thin material

Pattern runs or

sags

Too much material is being

applied

Turn uid adjustment dial further in

clockwise

Increase spray speed

Material is too thin Thicken material by adding more

paint

Too much

overspray

Gun too far from the spray

surface

Reduce distance & turn uid

adjustment dial further in clockwise

to reduce the amount of paint being

applied.

Pattern is very light

and splotchy

Material is too thick Thin the material

Moving the spray gun to fast Decrease spray speed

WARRANTY

OZITO UK Unit 9 Stadium Court, Wirral International Business Park, Plantation Road, Bromborough, Wirral, CH62 3QG 1016

All of our products undergo strict quality checks to ensure that they reach

you in perfect condition. In the unlikely event that your device develops a

fault, please contact our service department at the address shown on this

guarantee card. You can also contact us by telephone using the customer

service number shown. Please note the following terms under which

guarantee claims can be made:

1. These warranty terms regulate additional warranty services, which the

manufacturer mentioned below promises to buyers of its new products

in addition to their statutory guarantee claims are not affected by this

guarantee. Our guarantee is free of charge to you.

2. The warranty services only covers defects due to material or

manufacturing faults on a product which you have bought from the

manufacturer mentioned below are limited to either the rectication of said

defects on the product or the replacement of the product, whichever we

prefer.

Please note that our devices are not designed for use in commercial, trade

or professional applications. A guarantee contract will not be created if the

device has been used by commercial, trade or industrial business or has

been exposed to similar stresses during the guarantee period.

3. The following are not covered by our guarantee:

- Damage to the device caused by a failure to follow the assembly

instructions or due to incorrect installation, a failure to follow the operating

instructions (for example connecting it to an incorrect mains voltage or

current type) or a failure to follow the maintenance and safety instructions

or by exposing the device to abnormal environmental conditions or by lack

of care and maintenance.

- Damage to the device caused by abuse or incorrect use (for example

overloading the device or the use or unapproved tools or accessories),

ingress of foreign bodies into the device (such as sand, stones or dust,

transport damage), the use of force or damage caused by external forces

(for example by dropping it).

- Damage to the device or parts of the device caused by normal or natural

wear or tear or by normal use of the device.

4. Your Product is guaranteed for a period of 36 months from the original

date of purchase and is intended for DIY (Do It Yourself) use only. Lithium

Ion batteries and chargers are covered by a 12 month warranty. Warranty

excludes consumable parts. Guarantee claims should be submitted

before the end of the guarantee period within two weeks of the defect

being noticed. No guarantee claims will be accepted after the end of the

guarantee period. The original guarantee period remains applicable to the

device even if repairs are carried out or parts are replaced. In such cases,

the work performed or parts tted will not result in an extension of the

guarantee period, and no new guarantee will become active for the work

performed or parts tted. This also applies if an on-site service is used.

IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY YOU MUST

RETURN THE PRODUCT TO THE PLACE OF PURCHASE WITH YOUR

Please refer to the restrictions of this warranty concerning wearing parts,

consumables and missing parts as set out in the service information in

these operating instructions.

CUSTOMER SERVICE HELPLINE

GB: 0151 294 4488

IRL: 1850 882711

Ozito-diy.co.uk

Spare parts can be ordered from the Special Orders Desk

at your local Bunnings Warehouse or Homebase store.

For further information, or any parts visit

www.ozito-diy.co.uk or contact Ozito Customer Service:

Great Britain: 0151 294 4488

Ireland: 1850 882711

E-mail: enquires@ozito-diy.co.uk

ONLINE MANUAL

Scan this QR Code with your

mobile device to take you to

the online manual.

1 Nozzle

2 Nozzle Collar

3 Paint Pot

4 Suction Tube Locking Nut

5 Paint Pot Locking Lever

6 Variable Trigger

7 Air Regulator Valve

8 Air Inlet

9 Fluid Adjustment Dial

10 Fan Adjustment Dial

DELUX SPRAY GUN

KNOW YOUR PRODUCT

1 2 3 4 5 6

1. ASSEMBLY 3. ADJUSTING THE SPRAY GUN 4. ADJUSTING THE SPRAY GUN CONT. 5.

SPRAYING TECHNIQUE

SETUP & PREPARATION OPERATION

ASG-DLXU

2. PREPARATION

1 Slide the paint pot over the

suction tube an align with

the head.

3 To remove, simply undo

the paint pot locking lever

and remove the pot.

1 Wrap the threaded male air

inlet of the spray gun with

teon tape in a clockwise

direction.

3 Pull back the sleeve on

hose tting, insert male

end & release sleeve on

hose tting.

1 Before pouring any paint

or thinners work out how

much of each substance is

needed.

3 Once the correct viscosity

is obtained, pour the

mixture into the paint pot.

Thinning is particularly important when spraying. Most paints

are supplied ready for brush application and need to be diluted

sufciently for spraying purposes.

Follow the manufacturers guide for thinning ratios which

should be labelled on the paint container.

2 Tighten the paint pot

locking lever.

2 Screw the female tting

clockwise onto the male

end of the air inlet.

2 Pour the required paint and

thinners through a lter into

a mixing cup and then mix

thoroughly.

Installing the Paint Pot

Attaching to Compressor

Thinning

WARNING! ENSURE THE TOOL IS DISCONNECTED FROM

THE AIR SUPPLY BEFORE PERFORMING ANY OF THE

FOLLOWING OPERATIONS.

NOTE: FOR BEST RESULTS, SURFACE PREPARATION AND PAINT

THINNING ARE THE TWO MOST IMPORTANT AREAS. ENSURE

ALL SURFACES ARE FREE OF DUST, DIRT AND GREASE.

IMPORTANT! THE SPRAY GUN CANNOT BE USED WITH

MATERIALS CONTAINING ABRASIVE SUBSTANCES, GLAZES,

CAUSTIC AND ALKALINE SUBSTANCES.

1 Squeeze the variable

trigger to start spraying.

Note: The further the variable trigger is pressed, the more uid

will ow through the gun.

1 Fully tighten the uid

adjustment dial.

3 Begin 15cm off the edge of the area being sprayed. Start

the movement of the stroke before squeezing the trigger.

Release trigger once passed the opposite edge of the

workpiece.

For vertical surfaces:

For a low workpiece: For a high workpiece:

1 To change the spray

pattern, loosen the nozzle

collar and rotate the nozzle

to the desired position.

Tighten nozzle collar to

secure nozzle in place.

Ensure the suction tube locking nut is tightened after adjusting.

For horizontal surfaces:

The uid adjustment dial is a stop that limits the distance the

trigger can be pressed, thereby limiting the amount of paint

being sprayed.

2 Release the variable

trigger to stop spraying.

2 Slightly loosen the dial

then test setting on a

scrap piece of material.

Variable Trigger

Fluid Adjustment Dial

Choosing Spray Patterns

Adjusting the Suction Tube

PAINT

THINNERS

PAINT

THINNERS

1. Move the gun with the entire arm, not by exing the

wrist. This will keep the spray gun at right angles to the

surface, keeping the pattern even.

2. Keep the spray gun perpendicular to the surface, so

spray distance is consistent.

Helpful Hints

1. Maintain the same distance from workpiece (approx 15cm)

throughout each pass.

2. Maintain the same speed throughout each pass.

3. Always allow a coat to completely dry before adding another coat.

4. Avoid stopping and starting in the middle of workpiece as this can

lead to a patchy nish.

5. Overlap each stroke by half the width of the previous stroke for

even coverage.

3 Repeat step 2 until desired uid output is reached.

1 Start with the fan

adjustment dial completely

loosened.

The fan adjustment dial controls the distibution of paint in the

fan. Turned all the way clockwise, paint is concentrated in the

centre of the fan. As the dial is turned anti-clockwise more paint

is distributed toward the edges.

2 Partly tighten the dial then

test setting on a scrap

piece of material.

Fan Adjustment Dial

3 Repeat step 2 until desired fan pattern is reached.

1 To restrict the air pressure

entering the gun turn the

valve clockwise.

The air regulator valve controls the air pressure entering the gun.

2 To increase air pressure

entering the gun, turn the

air valve anti-clockwise.

Air Regulator Valve

7 8 9 10

1 Loosen the suction tube

locking nut then rotate

suction tube to appropriate

position.

NOTE: After each use it is essential that the spray gun

is cleaned thoroughly. Failure to do so will likely cause

blockages which will prevent the tool from working.

FAILURE TO CLEAN THE TOOL WILL VOID THE

WARRANTY.

Product specificaties

Merk:	Ozito
Categorie:	Niet gecategoriseerd
Model:	ASG-DLXU

Heb je hulp nodig?

Als je hulp nodig hebt met Ozito ASG-DLXU stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Ozito

Ozito PXLEK-1840 Handleiding

2 November 2024

Ozito PXPPS-1820 Handleiding

8 April 2024

Ozito PXNGS-218 Handleiding

8 April 2024

Ozito PXHTBK-2518 Handleiding

8 April 2024

Ozito PSR-5732U Handleiding

16 Maart 2024

Ozito PXCLMLTC-418U Handleiding

16 Maart 2024

Ozito PXWBS-200U Handleiding

16 Maart 2024

Ozito PXDDK-301U Handleiding

16 Maart 2024

Ozito PXCPPS-018U Handleiding

16 Maart 2024

Ozito WPHGK-2000U Handleiding

16 Maart 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Taga Harmony TOS-600 v.2 Handleiding

26 November 2024

Trace Elliot Pro 2x12 Cabinet Handleiding

26 November 2024

Kramer K-Bar Camera Bracket Handleiding

26 November 2024

Kramer RK-19 Handleiding

26 November 2024

Kramer OSP-MM1 Handleiding

26 November 2024

Kramer ASPEN-1616UX Handleiding

26 November 2024

Korg Pitchstrap Handleiding

26 November 2024

NeoMounts WL70-450BL11 Handleiding

26 November 2024

Kramer CLS-AOCH/60 Handleiding

26 November 2024

Klauke EKM 6022ISM Handleiding

26 November 2024