Ozito ASG-6000 Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor Ozito ASG-6000 (8 pagina's) in de categorie Verfspuit. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/8
1
AIRLESS PAINT
SPRAYER
650W
INSTRUCTION MANUAL
SPECIFICATIONS
Input Power: 650W
Voltage: 230-240V ~ 50Hz
Max. Pressure: 3000psi (21MPa)
Max. Flow Rate: 1.09±10% l/min
Spray Tip Size: 515
Outlet Paint Connector: 1/4-18NPSM
Max. Hose Pressure: 12000psi (83MPa)
High Pressure Hose: 7.6m
Full-load Current: 2.0~3.1A
Short Circuit Rating: 5kA
Paint Temperature: 5~40°C
Weight: 7.69kg
ASG-6000
WHAT’S IN THE BOX
Airless Sprayer
IN ORDER TO MAKE A CLAIM UNDER THIS
WARRANTY YOU MUST RETURN THE PRODUCT
TO YOUR NEAREST BUNNINGS WAREHOUSE WITH
YOUR BUNNINGS REGISTER RECEIPT. PRIOR TO
RETURNING YOUR PRODUCT FOR WARRANTY
PLEASE TELEPHONE OUR CUSTOMER SERVICE
HELPLINE:
Australia 1800 069 486
New Zealand 0508 069 486
1 YEAR REPLACEMENT WARRANTY
Your product is guaranteed for a period of 12 months from
the original date of purchase. If a product is defective it will
be replaced in accordance with the terms of this warranty.
Warranty excludes consumable parts, for example: carbon
brushes, chuck, depth rod, chuck key, auxiliary handle.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other
than that specified on the tool.
• If the tool shows signs of damage or defects caused
by or resulting from abuse, accidents or alterations.
• Failure to perform maintenance as set out within the
instruction manual.
• If the tool is disassembled or tampered with in any way.
WARRANTY
TO ENSURE A SPEEDY RESPONSE PLEASE
HAVE THE MODEL NUMBER AND DATE OF
PURCHASE AVAILABLE. A CUSTOMER SERVICE
REPRESENTATIVE WILL TAKE YOUR CALL
AND ANSWER ANY QUESTIONS YOU MAY
HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.
OZITO Australia/New Zealand (Head Office) 1-23 Letcon Drive, Bangholme, Victoria, Australia 3175.
The benefits provided under this warranty are in addition
to other rights and remedies which are available to you at law.
Our goods come with guarantees that cannot be excluded
at law. You are entitled to a replacement or refund for a major
failure and for compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
Generally you will be responsible for all costs associated with
a claim under this warranty, however, where you have suffered
any additional direct loss as a result of a defective product you
may be able to claim such expenses by contacting our customer
service helpline above.
ozito.com.au
High Pressure Hose
Hex Key and Spanner x 2
Cleaning Brush
Fine Needle x 3
0517
Spray Gun
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1
KNOW YOUR PRODUCT SETUP & PREPARATION
1. ASSEMBLY
1 Pressure Control Dial
2 Stand
3 Return Pipe
4 Paint Outlet
5 Filter
6 Inlet Hose
7 Priming Lever
8 On/Off Switch
9 Carry Handle
AIRLESS SPRAY GUN
2 Reposition pump on frame,
so legs face backwards.
Reconnect pump to frame
with four bolts.
1 Remove four bolts from
frame.
Hose Connection
Frame Connection
1 Connect high pressure
hose to paint outlet and
tighten.
2 Connect other end of hose
to gun swivel and tighten.
10 Nozzle Tip
11 Spray gun
12 7.6m High pressure hose
13 Spray Gun Filter
14 Spanner x 2
15 Hex Key
16 Fine Needle x 3
17 Cleaning Brush
3 Ensure all connections have been correctly tightened with a
19mm spanner.
4 Connect the inlet hose
and return pipe to the
back of the unit. Secure
the return pipe by
releasing the tabs on the
hose clamp.
5 Secure inlet hose by
tightening screw on hose
clamp with a at head
screwdriver.
WARNING! ENSURE THE TOOL IS DISCONNECTED
FROM THE POWER SUPPLY BEFORE PERFORMING
ANY OF THE FOLLOWING OPERATIONS.
3. PREPARATION
Priming Operation
1 Fully submerge lter and
return pipe in coating
material.
3 To set the pressure control
dial correctly, align the
central mark with the
desired setting icon.
4 Set priming lever to prime,
then turn unit on.
2 Set pressure control dial to
prime.
2. ASSEMBLY CONT.
Locking the Spray Gun Trigger
1 To lock the spray gun
trigger, rotate the trigger
locking screw clockwise.
The spray gun trigger should be locked prior to preparing the spray
station to ensure the trigger does not accidentally get released.
2 To unlock the trigger, rotate
the trigger locking screw
anti-clockwise.
Note: Do not thin paint for use in this spray gun.
Spray Tip & Guard
1 Insert the mesh
lter into the
handle and align
the handle with the
upper part of the
spray gun.
2 While holding the
upper section of
the spray gun,
tighten the handle
using a 21mm
spanner.
Note: The spray gun comes assembled from the factory. If the
spray gun has been disassembled for cleaning, follow the steps
below to re-assemble.
3 Slide the trigger guard onto
the tab on the handle and
tighten using a 3mm hex
key and spanner.
5 Place guard over end of
gun then insert nozzle tip.
4 Ensure the small spacer
and washer that locate the
nozzle tip are inserted in
the nozzle.
6 Tighten retaining nut.
WARNING! THIS TOOL IS RECOMMENDED FOR THE
USE WITH RESIDUAL CURRENT DEVICE WITH A
RATED RESIDUAL CURRENT OF 30MA OR LESS.
Product specificaties
| Merk: | Ozito |
| Categorie: | Verfspuit |
| Model: | ASG-6000 |
Heb je hulp nodig?
Als je hulp nodig hebt met Ozito ASG-6000 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Verfspuit Ozito
16 November 2024
16 Maart 2024
23 Mei 2023
4 Mei 2023
3 April 2023
29 Maart 2023
8 Maart 2023
24 Februari 2023
2 Februari 2023
15 November 2022
Handleiding Verfspuit
- Verfspuit Bort
- Verfspuit Deco
- Verfspuit Defort
- Verfspuit Easymaxx
- Verfspuit Einhell
- Verfspuit Elektra Beckum
- Verfspuit Ferm
- Verfspuit Holzmann
- Verfspuit Magnum
- Verfspuit Metabo
- Verfspuit Paintmaxx
- Verfspuit Parkside
- Verfspuit Pattfield
- Verfspuit Powerplus
- Verfspuit Silverline
- Verfspuit Wagner
- Verfspuit Westfalia
- Verfspuit Worx
- Verfspuit Jocca
- Verfspuit 3M
- Verfspuit Black And Decker
- Verfspuit Cocraft
- Verfspuit Meec Tools
- Verfspuit Aerotec
- Verfspuit Cotech
- Verfspuit Power Craft
- Verfspuit Truper
- Verfspuit Fieldmann
- Verfspuit Sun Joe
- Verfspuit Probuilder
- Verfspuit MSW
- Verfspuit Birchmeier
- Verfspuit Yato
- Verfspuit Aqua Joe
- Verfspuit Abac
- Verfspuit Meister Craft
- Verfspuit Wagner SprayTech
- Verfspuit Chapin
- Verfspuit XU1
Nieuwste handleidingen voor Verfspuit
16 November 2024
15 November 2024
5 November 2024
15 Oktober 2024
15 Oktober 2024
27 Augustus 2024
27 Augustus 2024
27 Augustus 2024
27 Augustus 2024
7 Augustus 2024